CYP CDPS-U2HPIP Manuale utente

CDPS-U2HPIP

4K UHD 2x1 HDMI Multi-Window Scaler Switcher

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

RDV1 2019/09/09 Preliminary release

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel................................................. 3

6.2 Rear Panel.................................................. 4

6.3 IR Cable Pinouts ........................................ 5

6.4 RS-232 Pinout and Defaults...................... 5

6.5 OSD Menu.................................................. 6

6.6 WebGUI Control...................................... 29

6.6.1 Video Mode Tab............................ 31

6.6.2 Window Layout Tab....................... 33

6.6.3 Color Key Tab................................. 35

6.6.4 Picture Tab...................................... 36

6.6.5 Audio Tab ....................................... 37

6.6.6 Input EDID Tab................................ 38

6.6.7 HDCP Mode Tab............................ 39

6.6.8 Output Resolution Tab................... 39

6.6.9 OSD Settings Tab............................ 40

6.6.10 Logo Settings Tab......................... 41

6.6.11 Ethernet Tab................................. 43

6.6.12 Advanced Tab............................. 44

6.6.13 Setup Tab...................................... 46

6.6.14 Information Tab............................ 47

6.7 Telnet Control.......................................... 48

6.8 Serial and Telnet Commands................ 49

7. Connection Diagram ....................................74

8. Specications ................................................75

8.1 Technical Specications ........................ 75

8.2 Video Specications............................... 76

8.3 Audio Specications............................... 78

8.3.1 Digital Audio................................... 78

8.4 Cable Specications .............................. 79

8.5 HDBaseT Features.................................... 80

9. Acronyms.......................................................81

1. INTRODUCTION

This 2 by 1 HDMI Multi-Window Scaler Switcher is a high performance

HDMI switch with integrated scaling and multi-windowing technology.

With a primary HDMI output and a mirrored HDBaseT output, this is an

ideal solution for monitoring or displaying two sources simultaneously

for use in control rooms, conference rooms or classrooms. Video

resolutions up to 4K@30Hz and a full range of advanced audio formats

such as 8 channel LPCM and HD bitstream are supported on both the

inputs and outputs. This unit is also fully compatible with the HDCP 1.x

and 2.2 standards.

Any of 2 different HDMI sources may be displayed individually, full

screen with seamless transition switching, or they can be displayed

using a variety of multi-window modes including standard views like

PiP (Picture in Picture) and PoP (Picture outside of Picture) as well as

a fully customizable dual-window mode. Chroma keying and custom

logo insertion with adjustable transparency is also available. Control of

input/window routing, position and sizing is easy using the front panel

controls with OSD menu as well as by WebGUI, RS-232, and Telnet.

2. APPLICATIONS

• Entertainment Rooms & Home Theaters

• Showroom & Demo Rooms

• Lecture Hall Presentations

• Public Commercial Displays

3. PACKAGE CONTENTS

• 1× 4K UHD 2×1 HDMI Multi-Window Scaler Switcher

• 1× 24V/2.7A DC Power Adapter

• 2× 3-pin Terminal Block

• 1× 3.5mm to IR Extender Cable

• 1× 3.5mm to IR Blaster Cable

• 1× Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• A compatible HDBaseT receiver with PoH support is recommended.

• The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6A or Cat.7, is highly recommended.

5. FEATURES

• HDMI 2.0 and DVI 1.0 compliant

• HDCP 1.x and 2.2 compliant

• 2 HDMI inputs, 2 mirrored video outputs (1×HDMI, 1×HDBaseT)

• Standard support for up to 4K UHD (10.2Gbps, 4K@30Hz 4:4:4, 8-bit)

digital video input (HDMI) and output (HDMI/HDBaseT)

Note: Interlaced resolutions are not supported

• HDBaseT output extends video, audio, and data over a single

Cat.5e/6/7 cable and can reach distances up to 70m/230ft at

1080p60 when using Cat.6a/7

• Supports pass-through of many audio formats including LPCM (up

to 8 channels), Bitstream and HD Bitstream

• Supports standard PoH (PSE) from the HDBaseT output to connected

HDBaseT (PD) receivers (compatible receivers only)

• Supports seamless switching with customizable zoom, aspect ratio,

and H/V mirroring

• Multi-windowing supports PiP (Picture in Picture), PoP (Picture outside

of Picture) and custom dual windowing modes with independent

audio source selection

• Secondary PiP window supports customizable outline, chroma key,

and transparency

• Uploadable and freely positioned graphic logo insertion with

chroma key and transparency

• Supports the ability to store up to 5 output conguration presets that

can be easily recalled later

• Controllable via front panel buttons with OSD, WebGUI, Telnet, and

RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE

IN 1

IN 2

MODE MENU

1080P

ENTER- / + / 

XGA

WINDOW21

POWER INPUT

SWAP

1 2 4 5 6 7 8 93

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2SERVICE Port: This port is used for User Logo and EDID uploads, and

rmware updates.

3WINDOW 1~2/IN 1~2 LEDs: The illuminated LEDs indicate which

source is currently selected for each window.

Note: In Switcher Mode only the window 1 LEDs are used.

4MODE Button: Press this button to sequentially switch through the

available video output modes (Switcher, PiP, PoP, Custom).

5INPUT/SWAP Button: Press this button to swap sources between the

two windows. In Switcher Mode, this button changes the live input.

6MENU Button: Press to enter the OSD menu, or to back out from

menu items.

Note: Pressing “MENU” and “+” together will reset the output

resolution to XGA (1024×768@60Hz). Pressing “MENU” and “-”

together will reset the output resolution to 1080p@60Hz.

7- (MINUS) Button: Press to move down or adjust selections within

OSD menus.

8+ (PLUS) Button: Press to move up or adjust selections within OSD

menus.

9ENTER Button: Press to conrm a selection within the OSD or to go

deeper into a menu item.

6.2 Rear Panel

DC 24VCONTROLHDMI OUTIR INIR OUTCAT5e/6/7 OUT

RS-232HDMI IN 2HDMI IN 1

RXTX

RS-232

RXTX

BYPASS

1 2 3 4 5 6 7 8 9

1HDMI IN 1~2 Ports: Connect to HDMI source equipment such as

media players, game consoles, or set-top boxes.

2RS-232 3-pin Terminal Block: Connect directly to a PC, laptop, or

other serial control device with a 3-pin adapter cable to send RS-

232 commands to control the unit.

3BYPASS RS-232 3-pin Terminal Block: Connect to a PC, laptop,

or serial controllable device with a 3-pin adapter cable for the

extension of RS-232 signals between both ends of the HDBaseT

connection.

4CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver

with a single Cat.5e/6/7 cable for transmission of all data signals.

PoH will also be supplied to a connected compatible PD receiver.

5IR OUT Port: Connect to an IR Blaster to transmit IR signals from the

other end of the HDBaseT connection to devices within direct line-

of-sight of the IR Blaster.

6IR IN Port: Connect to an IR Extender to receive local IR control

signals and extend them to devices connected to the other end

of the HDBaseT connection. Ensure that the remote being used is

within direct line-of-sight of the IR Extender.

7HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for

digital video and audio output.

8CONTROL Port: Connect directly, or through a network switch, to

your PC/laptop to control the unit via Telnet/WebGUI.

9DC 24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

6.3 IR Cable Pinouts

IR Blaster

Cabl

Infrared

Power

Not U

sed

IR Extender

Cabl

Infr

ared

Power

Ground

6.4 RS-232 Pinout and Defaults

Serial Port Default Settings

Baud Rate 19200

Data Bits 8

Parity Bits None

Stop Bits 1

Flow Control None

RS-232 Port 1 (Unit control) RS-232 Port 2 (HDBaseT extension)

RxD

GND

TxD

3-pin Terminal Block

RxD

GND

TxD

3-pin Terminal Block

RxD

GND

TxD

3-pin Terminal Block

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente