CYP EL-41AT Manuale utente
OPERATION MANUAL
EL-41AT
4 in, 1 out
v1.3 HDMI Switcher with
Independent Audio
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2
4.2 Rear Panel Diagram 3
4.3 Connection Diagram 4
4.4 Remote Control 5
5. Specications 5
6. RS232 Pinouts 6
6.1 Command Sets 6
Table of Contents
1. Introduction
The EL-41AT is a high performance v1.3 HDMI switcher with separate digital
audio input and output. It allows your various HDMI sources to share one HDTV
display. By simply pressing one button you can select your desired HDMI source
for display on the HDTV, meanwhile the selected digital audio will be passed
through the Optical (Toslink) or Coaxial output to play on your audio amplier.
2. Features
• v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
• Supports ‘Deep Colour’ (10, 12, & 16 bit).
• Supports High Denition audio - Dolby Digital TrueHD and DTS-HD Master
Audio.
• Auto Signal Enhancement feature can improve signal quality after long distance
transmission.
• LED indicators.
• Ideal for home theatre integration, conference room or retail stores.
• Supports high resolution input:
• PC: VGA, SVGA, XGA, SXGA, UXGA (1600 x 1200) and 1920 x 1200.
• HDTV: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 1080p 24fps.
• Remote control.
• Easy to install and simple to operate.
3. Package Contents
• EL-41AT
• 5V DC power supply adaptor.
• Operation Manual.
Page 1
Page 2
4. Operation Controls and Functions
1. Remote control sensor.
2. Input select/Indicators: Press the “INPUT” button repeatedly to switch to
your desired input source (HDMI/Optical/Coaxial), the LED will illuminate to
indicate which input source is being selected.
3. Signal Enhancement/Indicator: Press the “Signal Enhance” button to turn on
this feature to improve signal quality after long distance transmission. Press
again to turn off. The LED will illuminate when the signal is enhanced. This
feature is useful when encountering poor picture quality, if an appropriate
picture quality is displayed, the use of the SIGNAL ENHANCE button will not
produce a visible change.
4. Power LED Indicator:
5. The LED will illuminate when the power is connected.
1 2 3 4
INPUT SIGNAL ENHANCE
POWER
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 32 4
4.1 Front Panel
Page 3
4.2 Rear Panel
1. HDMI output: Connect the HDMI output to the HDMI input of your display using
an HDMI cable.
2. RS-232: Connect the 9-pin D-sub female connector to your control console for
remote control.
3. Digital audio output: Connects the Optical output to the Optical input of your
display using optical cable and or Connects the digital Coaxial output to the
digital coaxial input of the display using coaxial cable.
4. HDMI inputs: Connect your various HDMI sources to each of the HDMI input of
the EL-41AT using HDMI cables.
5. Digital audio inputs: Connects your various Optical sources to each of the
Optical input of the unit using optical cables or connects your various Coaxial
sources to each of the coaxial input of the unit using coaxial cables.
6. Power: Plug the supplied 5VDC power supply into the unit.
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
DC 5V
1
2
34 4 3 21
COAXIALOPTICAL
Page 4
4.3 Connection Diagram
HD Receiver HD Receiver
4.4 Remote Control
HDMI Input Port 4 x HDMI
HDCP Version V1.1
HDMI Output Port 1 X HDMI
HDMI Specication v1.3
Frequency bandwidth 2.25Gbps (single link)
Digital Audio Inputs 4 x Optical 4 x Coaxial
Digital Audio Outputs 1 x Optical 1 x Coaxial
Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL Certied)
Dimensions (mm) 240 (W) x 90 (D) x 43 (H)
Chassis Colour Black
Chassis Material Aliminium
Operating Temperature Operating from 0°C ~ 48°C
Weight (g) 850
5. Specications
1
2
3
1. Power: Press the button to turn the unit on
or off.
2. Direct input selector: Press 1, 2, 3 or 4 to
select the desired inputsource.
3. Void buttons (No function).
Page 5
EL-41AT Remote
Control
Console
PIN Denition PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
6. RS232 Pinouts
RS-232 transmission format:
• Baud Rate: 9600 bps
• Data bit: 8 Bits Parity: None
• Stop Bit: 1 bit
COMMAND ACTION
"I" + "1" PORT 1 ON
"I" + "2" PORT 2 ON
"I" + "3" PORT 3 ON
"I" + "4" PORT 4 ON
"S" + "1" ENABLE SIGNAL ENHANCE
"S" + "0" DISABLE SIGNAL ENHANCE
"P" + "1" POWER ON
"P" + "0" POWER OFF
6.1 Commands Sets
Page 6
Indice
Altri manuali CYP Interruttore
CYP
CYP EL-8100V Manuale utente
CYP
CYP EL-5500 Manuale utente
CYP
CYP CPRO-41W Manuale utente
CYP
CYP EL-42PIP Manuale utente
CYP
CYP OR-88U-4K22 Manuale utente
CYP
CYP CLUX-41N Manuale utente
CYP
CYP CDPS-UH4H1HFS Manuale utente
CYP
CYP EL-C81C Manuale utente
CYP
CYP CPRO-3D42S Manuale utente
CYP
CYP EL-21SY Manuale utente
CYP
CYP EL-41WAD Manuale utente
CYP
CYP CLUX-42SA Manuale utente
CYP
CYP CH-2537TXWPUS Manuale di installazione
CYP
CYP CPLUS-V4H1H Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP CPRO-3D42S Manuale utente
CYP
CYP AU-D21 Manuale utente
CYP
CYP CPLUS-V4H1H Manuale utente
CYP
CYP DCT-17 Manuale utente
CYP
CYP CMSI-424E Manuale utente
