CYP EL-7500V Manuale utente
EL-7500V
HDM/VGA/YUV/CV to HDMI/VGA & HDBaseT (48V)
Presentation Switch
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 23/04/2018 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 Remote Control........................................11
6.4 IR Cable Pinouts .......................................11
6.5 OSD Menu ..................................................12
6.6 WebGUI Control .......................................19
6.7 RS-232 Control..........................................23
6.8 Telnet Control............................................23
6.9 RS-232 and Telnet Commands............24
7. Connection Diagram .......................... 34
8. Specifications...................................... 35
8.1 Technical Specifications ........................35
8.2 Video Specifications................................37
8.3 Audio Specifications...............................38
9. Acronyms............................................. 39
6
1. INTRODUCTION
This multi-input scaler has HDMI, as well as Composite Video, Component
Video, and PC (VGA) inputs which can be freely selected for output at a
scaled resolution of the user’s choosing over the mirrored HDMI, HDBaseT
and VGA outputs. This unit also includes analogue and digital audio out-
puts to provide additional playback exibility. Support for HDMI output
resolutions up to 1080p/WUXGA (RB) and Analogue to Digital Conversion
(ADC) functionality combine to allow for a wide range of AV signals to be
displayed on the connected displays.
The HDBaseT output provides a great solution to extend your audio and
video up to 70 metres over a single run of Cat.5e/6/7 cable. The HDBaseT
output can provide 48V PoH power to compatible HDBaseT Receivers. The
unit can be controlled via front panel buttons with an On-Screen Display
(OSD), WebGUI, IR remote, Telnet, and RS-232 making it exceptionally ver-
satile.
2. APPLICATIONS
Analogue and digital source integration
Upscaling standard denition video for high-denition displays
Conference centers
Lecture halls
Schools and universities
3. PACKAGE CONTENTS
1×Multi-format to HDMI/HDBaseT Scaler
1×24V/2.7A DC Power Adapter
1×Power Cord
1×15-pin D-sub to 3-RCA Cable
1×3.5mm to IR Extender Cable
1×Remote Control (CR-122)
1×Rackmount Ears (Set of 2)
1×Operation Manual
7
4. SYSTEM REQUIREMENTS
HDMI, VGA, component or composite video source equipment such as
media players, video game consoles, PCs, or set-top boxes.
HDMI or VGA receiving equipment such as HDTVs, monitors or audio
ampliers.
A compatible HDBaseT receiver with 48v PoH support is strongly
recommended.
The use of “Premium High Speed HDMI”cables is highly recommended.
The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly
recommended.
5. FEATURES
HDMI 1.3 and DVI 1.0 compatible
HDCP 1.x compliant
Multiple video and audio inputs: 3 HDMI, 3 VGA, 1 Component Video, 1
Composite Video, and 8 Stereo audio
Supports switching and scaling of multiple AV inputs for display over
mirrored HDMI, HDBaseT and VGA outputs
Supports input and output resolutions up to 1080p/WUXGA(RB)
Supports pass-through of LPCM 2.0 audio
Supports 3D de-interlace, noise reduction, and 3D comb ltering for
composite video sources
Frame rate conversion support
Supports analogue to digital (ADC) and digital to analogue (DAC)
audio conversion, insertion and extraction
Quick output resolution switching via hot keys
HDBaseT feature support: HD Video and Audio, Ethernet, 48V PoH, and
Control (bidirectional IR/RS-232 pass-through)
HDBaseT output provides 48V PoH (PSE) power to compatible HDBaseT
Receivers (PD)
Supports EDID and HDCP management
Remote control provides discrete input source selection
Controllable via front panel controls with OSD, RS-232, Telnet, WebGUI,
and IR remote
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER CV COMP PC 1PC 2PC 3 HDMI 1 HDMI 2 HDMI 3 MENU
XGA
ENTER
-
+
720P
-
+
EL-7500V
2 3 4 5 61
1POWER Button & LED: Press this button to power the unit on or place
it into stand-by mode. The LED will be lit when the unit is receiving
power.
Note: The power switch on the back of the unit must also be in the “On”
position for the unit to receive power.
2IR Window: Accepts IR signals from the included IR remote for control
of this unit only.
3CV/COMP/PC 1~3/HDMI 1~3 Buttons & LEDs: Press any of these
buttons to switch immediately to the corresponding input. An LED
will illuminate to indicate which source is currently selected.
4MENU Button: Press to enter the OSD menu, or to back out from
menu items.
5− & + Buttons: Press to navigate or to adjust selections within the
OSD menu.
6ENTER Button: Press to confirm a selection within the OSD or to go
deeper into a menu item.
Note: Pressing “ENTER” and “+” together will reset the output resolution to
XGA (1024×768@60Hz). Pressing “ENTER” and “−” together will reset the
output resolution to 720p@60Hz.
9
6.2 Rear Panel
RS-232 BYPASS RS-232 COAX. AUDIO
LAN
AUDIO
INPUT SERVICE
HDMI HDMI 1 HDMI 2 HDMI 3PC 1PC 2PC 3Cr/Pr Cb/Pb YRLCVPOWER
DC 24V
PC/HD
OUTPUT
IR
BLASTER
IR RL
EXTENDER
CAT5e/6/7
OUTPUT
1 7 89 10 13
2 3 4 5 6 11 12 14
1CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with a
single Cat.5e/6/7 cable for transmission of all data signals.
HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
PC/HD OUT: Connect to a monitor/display for video output. For HD
(Component) output, use the supplied D-Sub 9-pin to 3 RCA adaptor
cable for HD resolutions from 480p~1080p.
Note: When the selected HDMI input source signal has HDCP content the
VGA/Component output will not display any image.
2IR EXTENDER: Connect to the provided IR Extender to extend the
IR control range of remotely located devices. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
3IR BLASTER: Connect to an IR Blaster to transmit IR signals to devices
within direct line-of-sight of the IR Blaster.
4RS-232 BYPASS: Connect to a PC, laptop or other serial control device
for the extension of RS-232 signals across the HDBaseT connection.
5RS-232: Connect directly to a PC, laptop or other serial control device
to send RS-232 commands to control the unit.
6COAX OUT: Connect to an amplifier or active speakers for digital
audio output.
Note: When the AUDIO SOURCE setting is set to “AUTO” the coaxial output
supports passing standard HDMI 1.2 bitstream formats.
AUDIO OUT: Connect to an amplifier or active speakers for audio
output in stereo format.
Note: If the source format is bitstream, this output will be muted
automatically.
7HDMI IN 1~3: Connect to HDMI source equipment such as media
players, game consoles or set-top boxes.
10
AUDIO IN 1~3: Connect to the stereo analogue output of the device
connected to the paired HDMI input port.
Note: If the AUDIO SOURCE setting is set to “AUTO” and the HDMI input
contains audio, it will have priority over the analogue input.
8PC IN 1~3: Connect to VGA source equipment such as a PC or laptop.
AUDIO IN 4~6: Connect to the stereo analogue output of the device
connected to the paired VGA input port.
9YPbPr & L/R IN: Connect to component (YPbPr) video source
equipment with stereo audio such as DVD players or set-top boxes.
10 CV & L/R IN: Connect to composite video source equipment with
stereo audio such as DVD players or VCRs.
11 LAN: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI and to extend the
network to both ends of the HDBaseT connection.
12 SERVICE: Reserved for manufacturer use only.
13 POWER Switch: Flip this switch to provide power to the unit or to turn
it completely off.
Note: This unit’s power stand-by functionality will not work if this switch is
in the “Off” position.
14 DC 24V: Plug the 24V DC power adapter into this port and connect it
to an AC wall outlet for power.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali CYP Interruttore
CYP
CYP CED-S11 Manuale utente
CYP
CYP CLUX-42SA Manuale utente
CYP
CYP EL-41PIP Manuale di installazione
CYP
CYP EL-31SY Manuale utente
CYP
CYP EL-41S-4K22 Manuale utente
CYP
CYP CLUX-41AP Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP EL-42HEAC Manuale utente
CYP
CYP EL-5500 Manuale utente
CYP
CYP EL-C61C Manuale utente
