CYP EL-42S Manuale utente
OPERATION MANUAL
EL-42S
v1.3 HDMI 4 Way Switcher with
2 Identical Outputs
EL-42S_Manual-EN.indd 1 04/05/2011 16:23:33
Table of Contents
1. Introduction 1
2. Features 1
3. Package Contents 1
4. Operation Controls and Functions 2
4.1 Front Panel Diagram 2
4.2 Rear Panel Diagram 2-3
4.3 Remote Control 3
5. RS232 Pinouts 4
6. Commands Sets 4
7. Connection Diagram 5
8. Specications 5
EL-42S_Manual-EN.indd 2 04/05/2011 16:23:47
Page 1
1. Introduction
The IR Extender and the Repeater set is perfect for controlling IR controlled source
equipment over long distances. Up to ve sources can be controlled using this
extender set. Two sources can be controlled located locally to the repeater, whilst
the remaining three sources can be controlled locally to the extender, which can be
located up to 250m away via CAT5/6 cable. This system allows for the sources to be
controlled by their own original remote controls, from extended distances. A 5-eye
emitter accessory can be supplied for additional control of extra source equipment.
2. Features
• Supports ve outputs (two from the repeater, three from the extender).
• Control source equipment from a distance of up to 250 metres away, via CAT5/6
cable.
• Transmits infrared signals only.
• Allows the use of existing remote controls.
• IR Receiver’s frequency is at 20~60 kHz.
3. Package Contents
• Infrared Extender Box (CIR-03)
• Infrared Repeater Box (CIR-12)
• 1pc IR Eye Receiver cable (CIR-12)
• 5pcs IR Eye blaster cables (3pcs for CIR-03, 2pcs for CIR-12)
• 2pcs 5V DC power supply adaptors
• Operation Manual
EL-42S_Manual-EN.indd 1 04/05/2011 16:23:47
Page 2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. HDMI input Select/Indicator: Press the “Input” button sequentially to switch to
your desired input (HDMI 1 to HDMI 4), the LED will illuminate to indicate which
input source is selected
3. POWER Switch/Indicator: Press the “POWER” button to turn on/o the power, the
power LED illuminate in red colour means the power is turned on, when the LED
not illuminate power is turned o.
4.2 Rear Panel
POWERINPUT
4321
SPLITTER
4x2
HDMI 1.3/2.25G
HDMI
1 3 2
RS-232
HDMI OUT HDMI OUT
2 1
HDMI IN
4
HDMI IN
3
HDMI IN
2
HDMI IN
DC 5V
1
23
1
EL-42S_Manual-EN.indd 2 04/05/2011 16:23:48
Page 3
1. HDMI Outputs 1 and 2: Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical video
signal simultaneously.
2. RS232: 9-pin D-Sub connector for connecting to your PC or other control console
for remote control.
3. HDMI Inputs 1 to 4: Connect each of the input ports to the HDMI or DVI output of
your source equipment such as DVD player or set-top-box.
4. Power: Plug the 5V DC power supply into this unit and connect the adaptor to AC
wall outlet.
1. Power: Press the button to turn on/o the unit.
2. Direct input selector: Press 1, 2, 3 or 4 to select the desired input source.
4.3 Remote Control
1
2
CR-23
EL-42S_Manual-EN.indd 3 04/05/2011 16:23:49
Page 4
5. RS232 Pinouts
EL-42S Remote Control Console
PIN Denition PIN Denition
1 NC 1 NC
2 TxD 2 Rx
3 RxD 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
• EL-42S transmission format:
• Baud Rate: 9600 bps
• Data bit: 8 Bits Parity: None
• Stop Bit: 1 bit
6. Commands Sets
COMMAND
ACTION
“I” + “1” PORT 1 ON
“I” + “2” PORT 2 ON
“I” + “3” PORT 3 ON
“I” + “4” PORT 4 ON
“S” + “1” ENABLE SIGNAL ENHANCE
“S” + “0” DISABLE SIGNAL ENHANCE
“P” + “1” POWER ON
“P” + “0” POWER OFF
EL-42S_Manual-EN.indd 4 04/05/2011 16:23:49
Page 5
7. Connection Diagram
7. Specications
Frequency bandwidth 2.25Gbps (single link)
Input Ports 4 x HDMI female ports
HDCP Version v1.1
Output Port 2 x HDMI female ports
Remote Control Discrete IR remote
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/
UL certied)
Dimensions (mm) 240 (W) x 104 (D) x 50(H)
Chassis Colour Black
Chassis Material Aluminium
Operating Temperature Operating from 0°C ~ 48°C
Gross Weight (g) 820
Net. Weight (g) 600
EL-42S_Manual-EN.indd 5 04/05/2011 16:23:53
Notes:
EL-42S_Manual-EN.indd 6 04/05/2011 16:23:53
www.cypeurope.com
EL-42S_Manual-EN.indd 7 04/05/2011 16:24:07
Altri manuali per EL-42S
3
Indice
Altri manuali CYP Interruttore
CYP
CYP EL-C41C Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP PUV-2608TX Manuale utente
CYP
CYP PU-444HBTE Manuale utente
CYP
CYP EL-21SY Manuale utente
CYP
CYP CFSW-51MHL Manuale utente
CYP
CYP EL-41AT Manuale utente
CYP
CYP CMSI-8D8DSA Manuale utente
CYP
CYP CM-345TP Manuale utente
CYP
CYP EL-21SY Manuale utente
CYP
CYP CPRO-U4H1HFS Manuale utente
CYP
CYP EL-5400 Manuale utente
CYP
CYP EL-42S Manuale utente
CYP
CYP CDPS-41SQ Manuale utente
CYP
CYP EL-41SY Manuale utente
CYP
CYP EL-5500 Manuale utente
CYP
CYP CLUX-31GAME Manuale utente
CYP
CYP EL-31SY Manuale utente
CYP
CYP CDPS-U42HPIP Manuale di installazione
CYP
CYP EL-31TT-4K22 Manuale utente
