CYP CDPS-U42HPIP Manuale di installazione

CDPS-U42HPIP

4K UHD+4×2 HDMI Multiviewer

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 10/11/17 Preliminary release

VS1 17/01/18 Final technical review

VS2 25/01/18 Page number correction

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 Remote Control......................................... 5

6.4 RS-232 Control ........................................... 6

6.5 Telnet Control ............................................ 7

6.6 RS-232 and Telnet Commands ................ 7

6.7 WebGUI Control ...................................... 20

6.7.1 Input ................................................ 21

6.7.2 Output............................................. 23

6.7.3 Windowing...................................... 25

6.7.4 Audio............................................... 30

6.7.5 EDID Settings................................... 32

6.7.6 User Congration ........................... 34

6.7.7 System Settings............................... 35

6.7.8 Admin - Logout .............................. 36

7. Connection Diagram ....................................37

8. Specications ................................................38

8.1 Technical Specications ........................ 38

8.2 Video Specications............................... 39

9. Acronyms .......................................................40

1. INTRODUCTION

This 4 by 2 Multiviewer is a high performance HDMI switch with

integrated scaling and multi-windowing technology. It is an ideal

solution for monitoring or displaying multiple sources simultaneously

for use in control rooms, conference rooms or classrooms. Video

resolutions up to 4K@60Hz and LPCM audio up to 7.1 channels at

192kHz are supported on both input and output and this unit is fully

compatible with the HDCP 1.x and 2.2 standards.

Any of 4 different HDMI sources may be displayed individually, full

screen, or they can be displayed using a variety of multi-window

modes including quad view and PiP with the output being sent to 2

mirrored HDMI outputs (4K@50/60Hz output supports quad view and

full screen only). Management of input/window routing, position and

sizing can be controlled easily by use of the front panel controls as

well as by WebGUI, RS-232, Telnet, and IR remote control options.

2. APPLICATIONS

• Entertainment Room & Home Theater

• Show Room & Demo Room

• Lecture Room & Hall Presentation

• Show Room & Demo Room

• Public Commercial Display

3. PACKAGE CONTENTS

• 1×4 by 2 HDMI Multiviewer

• 1×12V/3A DC Power Adapter

• 2×5-pin Terminal Block

• 1×Remote Control (CR-180)

• 1×Rackmount Ears (Set of 2)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

5. FEATURES

• HDMI inputs and outputs with 18Gbps (600MHz) 4K UHD support

• DVI 1.0 compatible with the use of an HDMI-DVI adaptor

• HDCP 1.x and 2.2 compliant

• Supports HD resolutions up to 4K@60Hz (4:4:4, 8-bit)

• 4 HDMI inputs and 2 mirrored HDMI outputs

• Seamless switching (no loss of sync to display) when switching

sources in both full screen and multi-window modes

• Supports PiP (Picture-in-Picture), side by side, 3+1 quad view, and

2×2 quad view display options with independent audio source

selection

Note: 4K@50/60Hz output supports 2×2 Quad View only and is

limited to 1080p/4K sources.

• Supports the ability to store a multi-window arrangement as a preset

that can be recalled later

• Each window can have a border with a selectable color

• Uploadable and freely positioned graphic logo support

Note: The logo and border features are not available when the

output is set to 4K@50/60Hz.

• Supports easy adjustment of window size, position and settings in

the PiP windowing mode via the WebGUI

• Matrix mode supports input and output resolutions up to

1080p@60Hz with a single shared audio source (Outputs are

mirrored at higher resolutions)

• Controllable via front panel buttons, WebGUI, Telnet, RS-232, and IR

remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

UHD 4X2 MATRIX / PIP SCALER WITH FREE WINDOWS

IN 1 IN 2 IN 3 IN 4

MATRIX

1234

MULTI VIEW

WINDOW SOURCE SELECT

W1 W2 W3 W4

1234

MENU LOCK

ENTER PRESET

1 2 53

4 6

7 8 10 11

1POWER: Press this button to power the unit on (green LED) or place

it into stand-by mode (red LED).

2IR WINDOW: Accepts IR signals from the included IR remote for

control of this unit only.

3MATRIX A/B IN1~IN4: These input selection buttons behave

differently depending on the current input and output resolutions

in use.

AAll inputs and outputs are below 4K: Press any of these buttons to

seamlessly switch to the selected input (IN1~IN4)for display on the

associated output (A or B).

BAny input or output is 4K: Press any of these buttons to seamlessly

switch to the selected input (IN1~IN4) for display on both outputs

simultaneously.

Note: Audio for both outputs will follow the most recently selected

input (from A or B) in both modes.

4MULTIVIEW: Press any of these buttons to switch immediately to the

corresponding Multiview output mode.

5WINDOW SOURCE SELECT: Press these buttons to sequentially switch

through the available inputs for each window in Multiview output

modes.

6MENU: Press to enter the LCD menu, or to back out from menu

Items.

7ENTER: Press to conrm a selection within the LCD menu or to go

deeper into a menu item.

8 + & −: Press to move up and down or adjust selections within

menus.

9LOCK: Press to lock all button functions on the front panel. Press the

button again to release the lock function. The LCD will display a

“Lock” message when the function is active.

10 PRESET: Press this button to switch between the “Preset Load” and

“Preset Save” modes. Pressing the button a 3rd time exits the Preset

menu.

APreset Save: When in “Preset Save” mode, pressing the “Enter”

button will save the currently displayed window layout.

BPreset Load: When in the “Preset Load” mode, pressing the “Enter”

button will load the previously saved window layout.

Note: The audio selection is not saved as a part of the preset, only

the window layout.

11 LCD WINDOW: Displays the unit’s menu, settings, and information.

6.2 Rear Panel

DC 12V

CONTROL SERVICE

GND

RTS

CTS

COM

L/R OUT

HDMI OUT

1234

HDMI IN

1 2 4

5 6 7

1HDMI IN 1~4: Connect to HDMI source equipment such as media

players, game consoles or set-top boxes. DVI source equipment

may be connected by using an HDMI to DVI adapter.

2HDMI OUT A~B: Connect to HDMI TVs, monitors or ampliers for

digital video and audio output. DVI display equipment may be

connected by using HDMI to DVI adapter.

3L/R OUT: Connect to powered speakers or an amplier using a 5-pin

adapter cable for balanced stereo analog audio output.

Note: Only LPCM 2.0 sources are supported. Bitstream audio

sources will be muted automatically.

4COM: Connect directly to a PC, laptop or other serial control

device with a 3-pin adapter cable to send RS-232 commands to

control the unit.

5CONTROL: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI.

6SERVICE: This slot is reserved for rmware update use only.

7DC 12V: Plug the 12V DC power adapter into the unit and connect

it to an AC wall outlet for power.

6.3 Remote Control

1POWER: Power on the machine or enter

to standby mode.

2INFO: Display the current status/

information of the unit.

3A1~A4 & B1~B4: (Matrix Selection)

AWhen all inputs and outputs are below

4K: Press any of these buttons to

seamlessly switch to the selected input

(1~4) for display on the associated

output (A or B).

BWhen any input or output is 4K: Press any

of these buttons to seamlessly switch to

the selected input (1~4) for display on

both outputs simultaneously.

Note: Audio for both outputs will follow the most recently selected

input (from A or B) in both modes.

4MV1~MV4: (Multiview Selection) Press these buttons to switch

immediately to the corresponding Multiview output mode.

MV1: Switch to 2×2 quad view mode.

MV2: Switch to the 3+1 quad view mode.

MV3: Switch to the side-by-side view mode

MV4: Switch to PiP view mode.

5MATRIX/MULTIVIEW: Press to toggle between the Matrix and

Multiview modes.

6LOCK: Press to lock all button functions on the front panel. Press the

button again to release the lock function.

7ARROWS (///) & OK: Press the arrow buttons to navigate

the LCD menu. Press the “OK” button to conrm a selection or to

go deeper into a menu item.

8MENU: Press to enter the LCD menu.

INFO POWER

A1 B1

A2 B2

A3 B3

A4 B4

MV1

MV2

MV3

MV4

LOCK MATRIX/

MULTI VIEW

EXIT MENU

SAVE

PRESET

SOURCE

MUTE

DOWN

AUDIO

CR-180

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente