CYP EL-M31TT-4K22 Manuale utente

EL-M31TT-4K22

4K 6G HDR Multi-format USB-C, MiniDP, HDMI to HDMI

Output Table-top Switcher

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use

to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

RDV1 2021/12/03 Preliminary release

CONTENTS

1. Introduction..................................................1

2. Applications ..................................................1

3. Package Contents ......................................... 1

4. System Requirements ..................................1

5. Features.........................................................2

6. Operation Controls and Functions ..............3

6.1 Front Panel.............................................................3

6.2 Rear Panel...............................................................4

6.3 WebGUI Control ...................................................5

6.3.1 A/V Switch Tab...........................................7

6.3.2 Automation Tab.........................................9

6.3.3 EDID Tab.................................................... 10

6.3.4 Network Tab............................................. 12

6.3.5 System Tab ............................................... 13

6.4 Telnet Control..................................................... 14

6.5 Telnet Commands ............................................ 14

7. Connection Diagram ..................................28

8. Specications..............................................29

8.1 Technical Specifications ................................. 29

8.2 Video Specifications......................................... 30

8.3 Audio Specifications........................................ 32

8.3.1 Digital Audio ........................................... 32

8.3.2 Analogue Audio..................................... 32

8.4 Cable Specifications ........................................ 33

9. Acronyms.....................................................34

1. INTRODUCTION

This UHD+Multi Format to HDMI Table Box is an HDMI, Mini-DP, and

USB-C switch with audio embedding and HDMI output. The table box is

designed to be placed on a table, or mounted to any typical table edge

using a clamp. The HDMI, Mini-DP, and USB-C inputs and HDMI output

all support resolutions up to 4K@60Hz (4:4:4, 8-bit). With the use of the

3.5mm audio input, stereo audio may be embedded into the HDMI

output as well.

Signal management features, such as automatic source switching based

on input signal detection, enable convenient hands-free operation.

Additional functionality such as advanced EDID management,

HDCP management, and basic signal event automation (which can

automatically send CEC commands to the connected display) are also

available. The unit can be controlled via the front panel button, WebGUI,

and Telnet.

2. APPLICATIONS

Household entertainment sharing and control

Lecture halls, auditoriums, and classrooms

Conference rooms and boardrooms

Showroom display and control

3. PACKAGE CONTENTS

1× UHD+3×1 Multi-Format to HDMI Table Box

1× 5V/1A DC Power Adapter (2-pin Terminal Block)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI, DisplayPort, or USB Type-C source equipment such as media

players, video game consoles, or set-top boxes.

The use of Premium High Speed HDMI cables is highly recommended.

The use of 30AWG (Gen 2) USB Type-C cable is highly recommended.

The use of DisplayPort 1.2 or higher spec cable is highly recommended.

5. FEATURES

HDMI 2.0, DisplayPort 1.4, USB-C, and DVI 1.0 compliant

HDCP 1.x and 2.2 compliant

1 HDMI, 1 Mini-DisplayPort, 1 USB Type-C video input, and a 3.5mm

mini-jack analogue audio input

1 HDMI output

Supports up to 4K UHD+(18Gbps, 4K@60Hz 4:4:4, 8-bit) video input &

output

Supports Deep Colour input & output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input & output

Supports pass-through of many audio formats including 8 channel

LPCM, Bitstream, and HD Bitstream

Analogue audio may be embedded with all sources

Per-input EDID management with internal or external EDID options

Supports manual input selection or automatic input selection with hot

plug detection

Basic signal event automation (via CEC)

Convenient table box design

Front panel LEDs indicate input selection, power and HDCP status

Controllable via front panel button, WebGUI, or Telnet

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CONTROL

HDMI IN

Mini DP IN USB-C IN

AUDIO IN

HDCP

PWR

INPUT

SELECT

EL-M31TT-4K22

1 69 47

3 52 8

1AUDIO IN Port: Connect to the stereo analogue output of a device

such as a CD player or PC for embedding into the HDMI output.

2Mini DP IN Port & LED: Connect to DisplayPort source equipment

such as a PC or laptop. The LED will illuminate when the DisplayPort

input has been selected.

Note: For 4K sources, use of cable that supports DisplayPort 1.2 or higher

is strongly recommended.

3USB-C IN Port & LED: Connect to USB Type-C video source equipment

such as a PC or laptop. The LED will illuminate when the USB-C input

has been selected.

Note: Not all devices with USB Type-C ports can support video output.

Please verify that the device supports video output from the USB Type-C

port before connecting it.

4HDMI IN Port & LED: Connect to HDMI source equipment such as a

media player, game console, or set-top box. The LED will illuminate

when the HDMI input has been selected.

5INPUT SELECT Button: Press this button to toggle between the three

inputs.

6Reset Pinhole: Press to reset the unit to its factory defaults.

7CONTROL Port: Connect directly, or through a network switch, to

your PC/laptop to control the unit via Telnet/WebGUI.

8PWR LED: This LED will illuminate to indicate the unit is on and

receiving power.

9HDCP LED: This LED will illuminate when HDCP is active on the

currently selected input. If no HDCP is present, or authentication has

failed, the LED will remain o.

6.2 Rear Panel

HDMI OUT

DC 5V

1HDMI OUT Port: Connect to an HDMI TV, monitor, or amplier for

digital video and audio output.

2DC 5V 2-pin Terminal Block: Plug the 5V DC power adapter into this

2-pin terminal block and connect it to an AC wall outlet for power.

6.3 WebGUI Control

Device Discovery

Please obtain the“Device Discovery”software from your authorised dealer

and save it in a directory where you can easily find it.

Connect the unit and your PC/Laptop to the same active network and

execute the“Device Discovery” software. Click on “Find Devices on

Internet” and a list of devices connected to the local network will show up

indicating their current IP address.

Note: This unit’s network defaults to DHCP mode. The current IP address can

only be verified using the Device Discovery software.

By clicking on one of the listed devices you will be presented with the

network details of that particular device.

1) IP Mode: If you choose, you can alter the static IP network settings for

the device, or switch the unit into DHCP mode to automatically obtain

proper network settings from a local DHCP server. To switch to DHCP

mode, please select DHCP from the IP mode drop-down, then click

“Save” followed by “Reboot”.

2) WebGUI Hotkey: Once you are satisfied with the network settings,

you may use them to connect via Telnet or WebGUI. The network

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente