Cypress CY4531 EZ-PD CCG3 EVK Manuale utente

CY4531

EZ-PD™ CCG3 Evaluation Kit Guide

Doc. No. 002-10218 Rev. *C

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

www.cypress.com

Copyrights

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 2

Copyrights

and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or

referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the

United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except

as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual

property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written

agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive,

nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software

provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only

internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either

directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under

those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use,

distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction,

modification, translation, or compilation of the Software is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this

document without further notice. Cypress does not assume any liability arising out of the application or use of any product

or circuit described in this document. Any information provided in this document, including any sample design information

or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to

properly design, program, and test the functionality and safety of any application made of this information and any resulting

product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or

intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other

medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous

substances management, or other uses where the failure of the device or system could cause personal injury, death, or

property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to

perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness.

Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other

liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless

from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from

or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB,

F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a

more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their

respective owners.

EZ-PD is a trademark of Cypress Semiconductor Corporation.

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 3

Contents

1. Introduction....................................................................................................................................................................7

1.1 Kit Contents...........................................................................................................................................................7

1.1.1 Hardware Not Included With Kit................................................................................................................7

1.2 Getting Started ......................................................................................................................................................8

1.3 List of Recommended Hardware...........................................................................................................................8

1.3.1 Recommended Cables and Adapters.......................................................................................................8

1.4 Acronyms...............................................................................................................................................................8

2. Kit Installation..............................................................................................................................................................10

2.1 CY4531 EZ-PD CCG3 EVK Kit Software Installation ..........................................................................................10

3. CY4531 EZ-PD CCG3 EVK Hardware Details.............................................................................................................14

3.1 CCG EVK Base Board.........................................................................................................................................15

3.1.1 Block Diagram ........................................................................................................................................15

3.1.2 Features .................................................................................................................................................15

3.1.3 Connectors and Jumper Settings............................................................................................................16

3.2 CY4531 CCG3 Daughter Card............................................................................................................................18

3.2.1 Block Diagram ........................................................................................................................................18

3.2.2 Features .................................................................................................................................................18

3.2.3 Connectors and Jumper Settings............................................................................................................19

3.3 Powering the CY4531 EZ-PD CCG3 EVK Setup.................................................................................................20

4. Programming the CCG3 Device on CY4531 CCG3 EVK...........................................................................................21

4.1 Programming the CCG3 Device on the CCG3 Daughter Card............................................................................21

5. Kit Operation................................................................................................................................................................26

5.1 SuperSpeed USB Demo......................................................................................................................................26

5.1.1 Boards, Cables, and Accessories Needed .............................................................................................26

5.1.2 Running the SuperSpeed USB Demo.....................................................................................................26

5.1.3 Explanation of Functionality....................................................................................................................28

5.1.4 Common Problems and Troubleshooting ...............................................................................................28

5.2 DisplayPort Demo................................................................................................................................................29

5.2.1 Boards, Cables, and Accessories Needed .............................................................................................29

5.2.2 Running the DisplayPort Demo ..............................................................................................................29

5.2.3 Common Problems and Troubleshooting ...............................................................................................30

5.3 Dead Battery Demo.............................................................................................................................................30

5.3.1 Boards, Cables, and Accessories Needed .............................................................................................31

5.3.2 Running the Dead Battery Demo............................................................................................................31

5.3.3 Power Supply Connections.....................................................................................................................32

5.3.4 Common Problems and Troubleshooting ...............................................................................................33

Contents

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 4

6. Appendix......................................................................................................................................................................35

6.1 Terminology.........................................................................................................................................................35

6.2 CCG3 EVK Base Board.......................................................................................................................................36

6.2.1 Schematics.............................................................................................................................................36

6.2.2 Gerber Files............................................................................................................................................41

6.2.3 Bill of Materials .......................................................................................................................................47

6.3 CCG3 EVK Daughter Card..................................................................................................................................52

6.3.1 Schematics.............................................................................................................................................52

6.3.2 Gerber Files............................................................................................................................................55

6.3.3 Bill of Materials .......................................................................................................................................61

Revision History...................................................................................................................................................................63

Document Revision History ...........................................................................................................................................63

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 5

Safety Information

The CY4531 EZ-PD™ CCG3 EVK is intended for use as a development platform for hardware or software in a laboratory

environment. The board is an open-system design, which does not include a shielded enclosure. Due to this reason, the

board may cause interference to other electrical or electronic devices in close proximity. In a domestic environment, this

product may cause radio interference. In such cases, take adequate preventive measures. Also, do not use this board near

any medical equipment or RF devices.

Attaching additional wiring to this product or modifying the product operation from the factory default may affect its

performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable

mitigating measures must be taken.

The CY4531 EZ-PD CCG3 EVK as shipped from the factory has been verified to meet with requirements of CE as a Class

A product.

The CY4531 EZ-PD CCG3 Evaluation Kit Guide boards contain ESD-sensitive devices.

Electrostatic charges readily accumulate on the human body and any equipment, which can cause

a discharge without detection. Permanent damage may occur to devices subjected to high-energy

discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of

functionality. Store unused CY4531 EZ-PD CCG3 Evaluation Kit Guide boards in the protective

shipping package.

End-of-Life/Product Recycling

The end-of-life cycle for this kit is five years from the date of manufacture mentioned on the back of

the box. Contact the nearest recycler to discard the kit.

Safety Information

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 6

General Safety Instructions

ESD Protection

ESD can damage boards and associated components. Cypress recommends that the user perform procedures only at an

ESD workstation. If an ESD workstation is not available, use appropriate ESD protection by wearing an antistatic wrist strap

attached to the chassis ground (any unpainted metal surface) on the board when handling parts.

Handling Boards

The boards provided with CY4531 EZ-PD CCG3 Evaluation Kit are sensitive to ESD. This also applies to the boards that

are provided with a plastic casing when they are removed from the casing. Hold the boards only by the edges. After

removing a board from the box/casing, place it on a grounded, static-free surface. Use a conductive foam pad, if available.

Do not slide the board over any surface.

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 7

1. Introduction

The CY4531 EZ-PD™ CCG3 Evaluation Kit (EVK) is based on the CCG3 product family of Cypress’s USB Type-C

microcontrollers. This EVK is primarily intended to be an evaluation vehicle for USB Type-C host and client systems that

house a Type-C connector as well as for notebook applications. For USB Power Delivery (PD), the base board and

daughter card can be configured as a downstream facing port (DFP) or an upstream facing port (UFP). The kit also serves

as a vehicle to evaluate several features for Type-C, using a SuperSpeed USB demo and a DisplayPort demo, as

examples.

1.1 Kit Contents

The CY4531 EZ-PD CCG3 EVK consists of the following contents:

CCG EVK Base Board

CY4531 CCG3 Daughter Card (mounted on CCG EVK Base Board)

24-V DC 65 W Power Adapter (24 V, 2.7 A)

USB 3.0 Type-A to Type-B cable

USB Type-C to Type-A adapter

USB 3.1 EMCA (Electronically Marked Cable Assembly) Type-C cable

USB 2.0 Type-A to Mini-B Cable

Quick Start Guide

1.1.1 Hardware Not Included With Kit

The CY4531 EZ-PD CCG3 EVK does not come with all of the hardware needed to perform the demonstrations documented

in sections SuperSpeed USB Demo, DisplayPort Demo, and Dead Battery Demo of the Kit Operation chapter. The following

items are not included:

USB flash drive needed for the SuperSpeed USB Demo section.

DisplayPort cables needed for the DisplayPort Demo section. They are required to make connections from a PC to the

CCG EVK base board. If the PC has a mini-DisplayPort, then a mini-DisplayPort to DisplayPort cable will be required. If

the PC has a DisplayPort, then a DisplayPort to DisplayPort cable will be required. Recommended cables are listed in

Recommended Cables and Adapters section.

USB Type-C to DP/HDMI/VGA adapter to connect a display monitor to the CY4531 EZ-PD CCG3 EVK. Recommended

adapters and cables needed for them to connect to monitors are listed in Recommended Cables and Adapters section.

A digital multimeter to measure voltage for the Dead Battery Demo section. A standard multimeter is required to

measure the output voltage on the CCG base board to successfully demonstrate dead battery functionality along with a

USB Type-C Power Adapter.

Introduction

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 8

1.2 Getting Started

For instructions on how to run a quick demonstration and observe kit functionality, refer to the SuperSpeed USB Demo

section. This section also provides complete instructions on configuring the CY4531 EZ-PD CCG3 EVK base board and

daughter card.

1.3 List of Recommended Hardware

1.3.1 Recommended Cables and Adapters

See Table 1-1 to obtain a set of cables recommended to work with this kit. This kit is not shipped with these cables and

adapters and they are required to run the DisplayPort Demo and Dead Battery Demo.

Table 1-1. List of Recommended Cables and Adapters

No.

Description

Manufacturer

MPN

Vendor Link

DisplayPort to DisplayPort Cable (6”, gold plated)

Cable Matters

102005-6

Amazon Link

Mini DisplayPort to DisplayPort Cable (3”, gold plated)

Cable Matters

101007-BLACK-3

Amazon Link

Type-C to Display Port Adapter

Belinda

Amazon Link

Type-C to HDMI Adapter

Cable Matters

Amazon Link

Type-C to VGA Adapter

Cable Matters

Amazon Link

Type-C Power Adapter that supports 9V or above

Apple

Apple Store Link

Use item 1 or 2 in Table 1-1 to connect the PC’s DisplayPort or Mini-DisplayPort to the DisplayPort of CY4531 EZ-PD

CCG3 EVK. Depending on the display monitor you have, use item 3, 4 or 5 in Table 1-1 to connect from the USB Type-C

port of the CY4531 EZ-PD CCG3 EVK to the display monitor itself. Use item 6 to run the Dead Battery Demo.

1.4 Acronyms

Table 1-2. Acronyms Used in this Document

Acronym

Definition

ADC

analog-to-digital converter

configuration channel

DFP

downstream facing port

DRP

dual role port

embedded controller

EMCA

electronically marked cable assembly

EMI

electromagnetic interference

ESD

electrostatic discharge

EVK

evaluation kit

FET

field-effect transistor

GPIO

General-purpose input/output

HID

human interface device

HPD

hot plug detect

Introduction

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 9

Acronym

Definition

integrated circuit

I2C

inter-integrated circuit

IDE

integrated development environment

LED

light-emitting diode

PSoC®

Programmable Systems-on-Chip

PWM

pulse-width modulation

QFN

quad flat no-lead (package)

SWD

serial wire debug

UART

universal asynchronous receiver transmitter

UFP

upstream facing port

USB

Universal Serial Bus

USB PD

Universal Serial Bus Power Delivery

XRES

External Reset I/O Pin

CY4531 EZ-PD™ CCG3 Evaluation Kit Guide, Doc. No. 002-10218 Rev. *C 10

2. Kit Installation

This chapter describes how to perform the installation steps for the CY4531 EZ-PD CCG3 EVK.

2.1 CY4531 EZ-PD CCG3 EVK Kit Software Installation

To install the kit software, follow these steps:

a. Download the latest kit software setup file “CY4531 EZ-PD CCG3 EVK Complete Setup” from the kit’s website:

www.cypress.com/CY4531. This package contains the kit hardware files and the kit documentation (User Guide, Quick

Start Guide, and Release Notes). Double-click on the executable to start the installation. Click Next when the screen

shown in Figure 2-1 appears.

Figure 2-1. CY4531 EZ-PD CCG3 EVK Installer Screen

b. Select the required Installation Type and click Next to start the install (Figure 2-2). For first-time installation, it is

recommended that you select “Typical” as the Installation Type.

Indice

Altri manuali Cypress Microcontrollore

Cypress

Cypress CY3250-PLC20QFN Manuale utente

Cypress

Cypress CY15FRAMKIT-002 Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

Cypress

Cypress MB95310L Series Manuale utente

Cypress

Cypress S6E2DH series Manuale utente

Cypress

Cypress CapSense CY8CKIT-024 Manuale utente

Cypress

Cypress PSoC CY8CKIT-008 Manuale utente

Cypress

Cypress MB9BF568R Series Manuale utente

Cypress

Cypress MB96300 Series Manuale utente

Cypress

Cypress CY3684 Manuale utente

Cypress

Cypress CY8CKIT-001 Manuale utente

Cypress

Cypress EZ-USB CYUSB3KIT-001 Manuale utente

Cypress

Cypress CY3652 Manuale utente

Cypress

Cypress PSOC 3 FIRSTTOUCH STARTER KIT Manuale utente

Cypress

Cypress CY8CKIT-042-BLE-A Manuale utente

Cypress

Cypress PSoC 4200DS Prototyping Kit Manuale utente

Cypress

Cypress Traveo S6J3310 Series Manuale utente

Cypress

Cypress PSOC 1 Series Manuale utente

Cypress

Cypress CY3668 Manuale utente

Cypress

Cypress PSoC 4 CY8CKIT-049-4 Series Manuale utente

Cypress

Cypress CY8CKIT-030 Manuale utente

Cypress

Cypress CY3655 Manuale di installazione

Cypress

Cypress EZ-PD CY4502 Manuale utente

Cypress

Cypress PERFORM MB96630 Series Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F800 Manuale utente