Cypress PSoC 5 CY8CKIT-050A Manuale utente

CY8CKIT-050

PSoC®5 Development Kit Guide

Doc. # 001-65816 Rev. *C

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

2 CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C

Copyrights

Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a

Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted

nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an

express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components

in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user.

The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such

use and in doing so indemnifies Cypress against all charges.

Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by

and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty

provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create

derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom soft-

ware and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as speci-

fied in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source

Code except as specified above is prohibited without the express written permission of Cypress.

Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATE-

RIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described

herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein.

Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure

may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support sys-

tems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all

charges.

Use may be limited by and subject to the applicable Cypress software license agreement.

PSoC Creator™ is a trademark, and PSoC®and CapSense®are registered trademarks of Cypress Semiconductor Corp. All

other trademarks or registered trademarks referenced herein are property of the respective corporations.

Flash Code Protection

Cypress products meet the specifications contained in their particular Cypress PSoC Data Sheets. Cypress believes that its

family of PSoC products is one of the most secure families of its kind on the market today, regardless of how they are used.

There may be methods, unknown to Cypress, that can breach the code protection features. Any of these methods, to our

knowledge, would be dishonest and possibly illegal. Neither Cypress nor any other semiconductor manufacturer can guaran-

tee the security of their code. Code protection does not mean that we are guaranteeing the product as ‘unbreakable’.

Cypress is willing to work with the customer who is concerned about the integrity of their code. Code protection is constantly

evolving. We at Cypress are committed to continuously improving the code protection features of our products.

CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C 3

Contents

1. Introduction 5

1.1 Kit Contents.................................................................................................................5

1.2 PSoC Creator ..............................................................................................................5

1.3 Additional Learning Resources....................................................................................6

1.3.1 Beginner Resources.........................................................................................6

1.3.2 Engineers Looking for More.............................................................................6

1.3.3 Learn from Peers .............................................................................................6

1.4 Document History ........................................................................................................7

1.5 Documentation Conventions .......................................................................................7

2. Getting Started 9

2.1 Introduction..................................................................................................................9

2.2 CD Installation .............................................................................................................9

2.3 Install Hardware.........................................................................................................10

2.4 Install Software ..........................................................................................................10

2.5 Uninstall Software......................................................................................................10

3. Kit Operation 11

3.1 Programming PSoC 5 Device....................................................................................11

4. Hardware 13

4.1 System Block Diagram ..............................................................................................13

4.2 Functional Description ...............................................................................................14

4.2.1 Power Supply.................................................................................................14

4.2.1.1 Power Supply Jumper Settings........................................................15

4.2.1.2 Grounding Scheme..........................................................................16

4.2.1.3 Low-Power Functionality..................................................................16

4.2.1.4 AC/DC Adaptor Specifications.........................................................17

4.2.1.5 Battery Specifications ......................................................................17

4.2.2 Programming Interface...................................................................................17

4.2.2.1 On-board Programming Interface....................................................17

4.2.2.2 JTAG/SWD Programming................................................................18

4.2.3 USB Communication......................................................................................19

4.2.4 Boost Convertor.............................................................................................19

4.2.5 32-kHz and 24-MHz Crystal...........................................................................20

4.2.6 PSoC 5 Development Kit Expansion Ports....................................................20

4.2.6.1 Port D...............................................................................................20

4.2.6.2 Port E...............................................................................................22

4.2.7 RS-232 Interface............................................................................................23

4.2.8 Prototyping Area ............................................................................................23

4.2.9 Character LCD...............................................................................................24

4.2.10 CapSense Sensors........................................................................................25

4 CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C

Contents

5. Code Examples 27

5.1 Project: VoltageDisplay_SAR_ADC ..........................................................................28

5.1.1 Project Description.........................................................................................28

5.1.2 Hardware Connections ..................................................................................28

5.1.3 SAR ADC Configuration.................................................................................28

5.1.4 Verify Output..................................................................................................29

5.2 Project: VoltageDisplay_DelSigADC.........................................................................29

5.2.1 Project Description.........................................................................................29

5.2.2 Hardware Connections ..................................................................................29

5.2.3 Del-Sig ADC Configuration............................................................................30

5.2.4 Verify Output..................................................................................................31

5.3 Project: IntensityLED.................................................................................................31

5.3.1 Project Description.........................................................................................31

5.3.2 Hardware Connections ..................................................................................31

5.3.3 Verify Output..................................................................................................31

5.4 Project: LowPowerDemo...........................................................................................32

5.4.1 Project Description.........................................................................................32

5.4.2 Hardware Connections ..................................................................................32

5.4.3 Verify Output..................................................................................................32

5.5 Project: CapSense.....................................................................................................33

5.5.1 Project Description.........................................................................................33

5.5.2 Hardware Connections ..................................................................................33

5.5.3 Verify Output..................................................................................................33

5.6 Project: ADC_DAC....................................................................................................35

5.6.1 Project Description.........................................................................................35

5.6.2 Hardware Connections ..................................................................................35

5.6.3 Verify Output..................................................................................................35

A. Appendix 37

A.1 Schematic..................................................................................................................37

A.2 Board Layout.............................................................................................................42

A.2.1 PDC-09356 Top.............................................................................................42

A.2.2 PDC-09356 Power.........................................................................................43

A.2.3 PDC-09356 Ground.......................................................................................44

A.2.4 PDC-09356 Bottom........................................................................................45

A.3 Bill of Materials (BOM)...............................................................................................46

A.4 Pin Assignment Table................................................................................................50

CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C 5

1. Introduction

Thank you for your interest in the CY8CKIT-050 PSoC®5 Development Kit. This kit allows you to

develop precision analog and low-power designs using PSoC 5. You can design your own projects

with PSoC Creator™ or alter the sample projects provided with this kit.

The CY8CKIT-050 PSoC 5 Development Kit is based on the PSoC 5 family of devices. PSoC 5 is a

Programmable System-on-Chip™ platform for 8-bit, 16-bit, and 32-bit applications. It combines

precision analog and digital logic with a high-performance CPU. With PSoC, you can create the

exact combination of peripherals and integrated proprietary IP to meet your application

requirements.

1.1 Kit Contents

The PSoC 5 Development Kit contains:

■Development board

■Kit CD

■Quick start guide

■USB A to mini B cable

■3.3 V LCD module

Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office

for help.

1.2 PSoC Creator

Cypress's PSoC Creator software is a state-of-the-art, easy-to-use integrated development

environment (IDE) that introduces a hardware and software design environment based on classic

schematic entry and revolutionary embedded design methodology.

With PSoC Creator, you can:

■Create and share user-defined, custom peripherals using hierarchical schematic design.

■Automatically place and route select components and integrate simple glue logic, normally

located in discrete muxes.

■Trade off hardware and software design considerations allowing you to focus on what matters

and getting to market faster.

PSoC Creator also enables you to tap into an entire tools ecosystem with integrated compiler tool

chains, RTOS solutions, and production programmers to support both PSoC 3 and PSoC 5.

6 CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C

Introduction

1.3 Additional Learning Resources

Visit http://www.cypress.com/go/psoc3 for additional learning resources in the form of datasheets,

technical reference manual, and application notes.

1.3.1 Beginner Resources

AN77759 - Getting Started with PSoC 5

PSoC Creator Training

1.3.2 Engineers Looking for More

AN54460 - PSoC 3 and PSoC 5 Interrupts

AN52705 - PSoC 3 and PSoC 5 - Getting Started with DMA

AN52701 - PSoC 3 - How to Enable CAN Bus Communication

AN54439 - PSoC 3 and PSoC 5 External Oscillator

AN52927 - PSoC 3: Segment LCD Direct Drive

Cypress continually strives to provide the best support. Click here to view a growing list of

application notes for PSoC 3 and PSoC 5.

1.3.3 Learn from Peers

Cypress Developer Community Forums

CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C 7

Introduction

1.4 Document History

1.5 Documentation Conventions

Revision PDF Creation

Date Origin of

Change Description of Change

** 03/01/11 PVKV Initial version of kit guide

*A 04/28/11 RKAD Updated Schematic

*B 12/15/11 RKAD Added sections 4.2.1.4 and 4.2.1.5. Added Pin Assignment table in

the Appendix. Updated bill of materials. Content updates throughout

the document

*C 05/15/12 SASH Updated the Additional Resources section

Table 1-1. Document Conventions for Guides

Convention Usage

Courier New Displays file locations, user entered text, and source code:

C:\ ...cd\icc\

Italics Displays file names and reference documentation:

Read about the sourcefile.hex file in the PSoC Designer User Guide.

[Bracketed, Bold]Displays keyboard commands in procedures:

[Enter] or [Ctrl] [C]

File > Open Represents menu paths:

File > Open > New Project

Bold Displays commands, menu paths, and icon names in procedures:

Click the File icon and then click Open.

Times New Roman Displays an equation:

2 + 2 = 4

Text in gray boxes Describes cautions or unique functionality of the product.

8 CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C

Introduction

CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C 9

2. Getting Started

2.1 Introduction

This chapter describes how to install and configure the PSoC 5 Development Kit. Chapter 3

describes the kit operation. It explains how to program a PSoC 5 device with PSoC Programmer and

use the kit with the help of a code example. To reprogram the PSoC device with PSoC Creator, see

the CD installation instructions for PSoC Creator. Chapter 4 details the hardware operation. Chapter

5 provides instructions to create a simple code example. The Appendix section provides the

schematics and bill of materials associated with the PSoC 5 Development Kit.

2.2 CD Installation

Follow these steps to install the PSoC 5 Development Kit software:

1. Insert the kit CD into the CD drive of your PC. The CD is designed to auto-run and the kit menu

appears.

Figure 2-1. Kit Menu

Note If auto-run does not execute, double-click cyautorun.exe on the root directory of the CD.

10 CY8CKIT-050 PSoC 5 Development Kit Guide, Doc. # 001-65816 Rev. *C

Getting Started

After the installation is complete, the kit contents are available at the following location:

C:\Program Files\Cypress\PSoC 5 Development Kit\1.0

2.3 Install Hardware

No hardware installation is required for this kit.

2.4 Install Software

When installing the PSoC 5 Development Kit, the installer checks if your system has the required

software. These include PSoC Creator, PSoC Programmer, Windows Installer, .NET, Acrobat

Reader, and KEIL Complier. If these applications are not installed, the installer prompts you to down-

load and install them.

Install the following software from the kit CD:

■PSoC Creator

■PSoC Programmer 3.12.4 or later

Note When installing PSoC Programmer, select Typical on the Installation Type page.

■Code examples (provided in the Firmware folder)

2.5 Uninstall Software

The software can be uninstalled using one of the following methods:

■Go to Start > Control Panel > Add or Remove Programs; select the Remove button.

■Go to Start > All Programs > Cypress > Cypress Update Manager > Cypress Update Man-

ager; select the Uninstall button.

■Insert the installation CD and click Install PSoC 5 Development Kit button. In the CyInstaller

for PSoC 5 Development Kit 1.0 window, select Remove from the Installation Type drop-down

menu. Follow the instructions to uninstall.

Indice

Altri manuali Cypress Microcontrollore

Cypress

Cypress CY3274 Manuale utente

Cypress

Cypress S29XS128R Manuale utente

Cypress

Cypress MB96640 Series Manuale utente

Cypress

Cypress CY8CKIT-042 Manuale utente

Cypress

Cypress CY14NVSRAMKIT-001 Manuale utente

Cypress

Cypress CY8CKIT-042-BLE-A Manuale utente

Cypress

Cypress PSoC CY8CPROTO-063-BLE Manuale utente

Cypress

Cypress CY4531 EZ-PD CCG3 EVK Manuale utente

Cypress

Cypress CapSense CY8CKIT-024 Manuale utente

Cypress

Cypress Traveo S6J32E Series Manuale utente

Cypress

Cypress FR81S CY91F52 Series Istruzioni operative

Cypress

Cypress MB2146-301A-E Manuale utente

Cypress

Cypress PSoC 6 MCU Guida all'installazione

Cypress

Cypress CYALKIT-E03 Manuale

Cypress

Cypress PSoC 4 M Series Manuale utente

Cypress

Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit Manuale utente

Cypress

Cypress CY3274 Supplemento

Cypress

Cypress CY3642 Manuale utente

Cypress

Cypress F2MC-8L Series Manuale utente

Cypress

Cypress CY3274 Manuale utente

Cypress

Cypress PSoC CY8CKIT-048 Manuale utente

Cypress

Cypress CY3276 Manuale utente

Cypress

Cypress CYW9P62S1-43438EVB-01 Manuale utente

Cypress

Cypress PSOC 3 CY8CKIT-030A Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F800 Manuale utente