D-Link DAP-1320 Manuale
-1-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Technical Support Setup Procedure
FAQ : How To connect Range Extender to existing router via
WPS Setup
Release date : 1/06/2015
Model Support : DAP-1320
H/W:A1 , B1
S/W:1.x , 2.x
-2-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Technical Support Setup Procedure
*Firmware 1.10 and higher
DAP-1320 Push Button WPS Configuration
Note : DAP-1320 WPS router/access point
1 : DAP-1320
Note :
-3-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
-4-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
2 : WPS router/AP 5-7
3 : WPS DAP-1320 2LED
LED
-5-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
4 :
Note: DAP-1320
-6-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
5 : DAP-1320
SSID configuration note
-7-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Technical Support Setup Procedure
*Firmware 1.10 and higher
DAP-1320 Push Button WPS Configuration
Note: In order to setup the DAP-1320 using WPS, you must have a WPS compatible
router/access point
Step 1: Plug in the DAP-1320
Note: The light should turn red and then start blinking orange
-8-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Step 2: Press the WPS button on your router/AP (usually for about 5-7 seconds)
Step 3: Press and hold the WPS button on the DAP-1320 for 2 seconds. The LED should start to blink
green. Once it makes connection with your router the LED will stop flashing and turn solid GREEN.
-9-
FAQ : How To Connect Range Extender to existing router via WPS setup Version 1.00
Step 4: Unplug and place the DAP-1320 approx half way between the router and the desired
connection area.
Note: Correct placement of the DAP-1320 is very important. It needs to be positioned in an area
that still receives good signal from your router. A good starting point is approx half way between
the router and the area you want to get signal to.
Step 5: To connect wireless to the DAP-1320, Scan for available wireless networks on your wireless
device and connect using the Wi-Fi Network Name (SSID) and Wi-Fi Password information located on
your configuration note.
Altri manuali per DAP-1320
14
Altri manuali D-Link Estensione
D-Link
D-Link DAP-1360 Manuale utente
D-Link
D-Link DAP-1325 Manuale utente
D-Link
D-Link AC1200 Manuale utente
D-Link
D-Link DAP-1950 Manuale utente
D-Link
D-Link DCH-M225 Manuale utente
D-Link
D-Link EXO AC2000 Manuale utente
D-Link
D-Link DAP-1360 Manuale utente
D-Link
D-Link DAP-1955 Manuale utente
D-Link
D-Link Covr Manuale utente
D-Link
D-Link DAP-1520 Manuale utente
D-Link
D-Link AC750 Manuale utente
D-Link
D-Link DHP-701AV Manuale utente
D-Link
D-Link DAP-1610 Manuale utente
D-Link
D-Link AirPlus G DWL-G710 Manuale utente
D-Link
D-Link DAP-1950 Manuale utente
D-Link
D-Link DAP-X1870 Manuale utente
D-Link
D-Link DAP-1330 Manuale utente
D-Link
D-Link DAP-1720 Manuale utente
D-Link
D-Link DWL-G800AP Manuale utente
D-Link
D-Link DAP-1520 Manuale utente
