D-Link SECURICAM Network DCS-900 Manuale utente
Wireless G USB 2.0 Adapter
Version 2.0
DCS-900
Fast Ethernet Internet Camera
2D-Link DCS-900 Quick Install Guide
Package Contents
System Requirements
If any of the above items are missing, please contact your reseller.
• Windows® 2000 (SP4) or XP (SP2) operating system.
• PC with 1.3GHz processor or above; at least 128MB RAM
• Internet Explorer 6.0 or Netscape Navigator 7.0 or above.
• An existing 10/100 Ethernet-based network.
CAT5 Ethernet Cable
Manual and Software on CD
DCS-900
Fast Ethernet Internet Camera
Power Adapter
Camera Stand
3 D-Link DCS-900 Quick Install Guide
Hardware Overview
Front Panel LEDs
LAN
A blinking light indicates
data is being transmitted.
Power
A solid light indicates
the unit is properly
powered.
Camera Lens
Camera Stand
4D-Link DCS-900 Quick Install Guide
Hardware Overview
Back Panel Connections
Power Connector
Ethernet Cable
Connector
Reset
5 D-Link DCS-900 Quick Install Guide
Installation
Connect the Ethernet Cable
Connect the included Ethernet
cable to the network cable
connector located on the back
panel of the DCS-900 and
attach it to the network. Network
connectivity is confirmed when
the green LED Indicator on the
DCS-900, located below the
Power LED, is illuminated.
Attach the Power Supply
Attach the power supply to
the DC power input connector
located on the rear panel of the
DCS-900 and connect it to your
local power supply.
Note: Power source is confirmed
when the red LED Power Indicator
located to the right of the lens on
the DCS-900 is illuminated.
Attach the Swivel Stand
Locate the stand mount on the
bottom panel of the DCS-900
and screw on the swivel stand
to the base of the DCS-900.
6D-Link DCS-900 Quick Install Guide
You are now ready to run the Setup Wizard, which will guide you
quickly through the installation process.
Insert the D-Link Driver CD into your CD-ROM drive.
Configuration
Click Install Wizard
Click Next
7 D-Link DCS-900 Quick Install Guide
Click Yes
Click Next
Click Finish
8D-Link DCS-900 Quick Install Guide
You must change the Admin ID and Password immediately to protect
your camera against unauthorized access.
By default, the Admin ID and
Password are blank.
To change the Admin ID and
Password, select both Change
boxes and enter a New ID and
New Password.
To run the Setup Wizard, click on: Start > Programs >
D-Link Setup Wizard. Your camera’s IP Address will be displayed
here along with its corresponding MAC Address.
Click Wizard
Click Next
9 D-Link DCS-900 Quick Install Guide
Enter an IP Address and Subnet
Mask for your camera if you want
to change the current settings.
Enter your Gateway and DNS
settings. These settings must
correspond with your network
settings for you to access the
camera. If you are unsure of what
these settings should be, check
with your network administrator.
If you need to make any changes,
click Back to modify your settings.
Otherwise, click Restart to save
and apply your settings.
Click Next
Click Restart
10D-Link DCS-900 Quick Install Guide
The Home screen of your camera can be accessed from the Setup
Wizard using the Link button. You can also use your favorite Web
browser, type “http://address” in the address box where address
is the IP address that you assigned to the DCS-900 from the previous
section. Press Enter.
Your setup is complete!
Click Link to launch your web
browser and view your images.
Click ActiveX or Java to view
your video images.
• Make sure that you have the
latest version of Java installed on
your computer to ensure proper
operation when viewing the
video in Java mode. Java can be
downloaded for free from Sun’s
web site. (http://www.java.com)
• When you connect to the home page, you will be prompted to download
ActiveX. If you want to use ActiveX to view your video images instead of
Java, then you must download ActiveX.
• Please refer to the Manual located on the CD-ROM for additional information
regarding all features and instructions related to the DCS-900.
Click Link
Your Basic Setup is Complete!
Altri manuali per SECURICAM Network DCS-900
6
Indice
Altri manuali D-Link Telecamera IP
D-Link
D-Link DCS-1110 - Network Camera Manuale utente
D-Link
D-Link DHA-390 Manuale utente
D-Link
D-Link DCS-1000 Manuale utente
D-Link
D-Link DCS-4701E Manuale utente
D-Link
D-Link DCS-6620G - Network Camera Manuale utente
D-Link
D-Link DCS-G900 - SECURICAM Wireless G Internet Camera... Manuale utente
D-Link
D-Link SECURICAM Network DCS-2100+ Manuale utente
D-Link
D-Link SECURICAM Network DCS-5300W Manuale utente
D-Link
D-Link DCS-942L Manuale utente
D-Link
D-Link DCS-936L Manuale utente
D-Link
D-Link SECURICAM Network DCS-950 Manuale utente
D-Link
D-Link WIRELESS G DCS-950G Manuale utente
D-Link
D-Link DCS-6620G - Network Camera Manuale utente
D-Link
D-Link DCS-1110 - Network Camera Manuale utente
D-Link
D-Link DCS-942L Manuale utente
D-Link
D-Link DCS-825L Manuale utente
D-Link
D-Link DCS-942L Manuale utente
D-Link
D-Link DCS-5000L Manuale utente
D-Link
D-Link SECURICAM Network DCS-900 Manuale utente
D-Link
D-Link DCS-2330L Manuale utente
