D-Link DXN-W224 Manuale utente

Quick Start Guide

WECB

Version 1.0

Wireless Ethernet Coaxial Bridge

DXN-W224 Quick Start Guide

WECB

Minimum Requirements

•Windows® 8, 7, Vista®, or XP; Mac OS® X (10.5 or higher)

•An installed Ethernet adapter (10/100/1000)

•Any device that has a WiFi adapter. I.E. Xbox, IPad, IPhone

Package

Contents

Wireless Ethernet Coaxial Bridge (WECB) COAX Cable

Power Adapter Stand Splitter

DXN-W224 Quick Start Guide

Front Panel

Power MoCA

2.4

GHz

LAN1

LAN2

5 GHz

Power LED

A solid light indicates the device is receiving power.

MoCA LED

A solid light indicates the device has formed a network over the coaxial

cable with at least one other MoCA device (Wireless Gateway 2). The LED

will blink during data transmission.

2.4 GHz LED

A solid light indicates the 2.4 GHz Wi-Fi network is ready.

5 GHz LED

A solid light indicates the 5 GHz Wi-Fi network is ready.

LAN LEDs (1-2)

A solid light indicates a connection on the Ethernet port. The LED will blink

during data transmission.

DXN-W224 Quick Start Guide

Back

Panel

Reset Button

LAN Ports

Cable Out

Cable In

Power Port

Reset Button

Press and hold the reset button with a paper clip for 15 seconds to reset the

WECB to the factory default settings. Do not unplug the power during this

process.

LAN Ports (1-2)

Connect Ethernet devices such as computers, media players, and game

consoles using a CAT5 cable (not included)

Cable Out

Connect one end of thecoaxial cable to the Cable Out port and the other

end to your Wireless Gateway 2 or the COAX IN port on your set-top box.

Cable In

Connect one end of anothercoaxialcable to the Cable In port and the other

end to the cable outlet on the wall.

Power Port

Connect the supplied power adapter to power your WECB.

DXN-W224 Quick Start Guide

Hardware Installation

1. Power

Plug the WECB’s power adapter into an AC wall outlet or power strip.

Note: Power source is confirmed when the Power LED indicator on the front panel is lit.

2. Connect the Ethernet Cable

Connect one end of the included Ethernet cable to the LAN port located on the WECB’s back

panel and attach the other end to your network or computer.

3. Connect the Coaxial Cable

Connect one end of the coaxial cable to the Cable port located on the WECB’s back panel

and attach the other end to your cable outlet inside the house or directly to the Wireless

Gateway 2.

Note: There is no MoCA mode switch for configuration on the WECB.

DXN-W224 Quick Start Guide

Software Installation

D-Link WECB has a web-based configuration utility to allow control over certain coaxial

networking parameters. The unit is shipped with default parameters that will allow operation on

most coaxial network without any additional configuration.

Note: If you are connecting to a Wireless Gateway 2, it will automatically configure the settings on

your WECB.

However, if a special network security password is required or if a specific channel operating

frequency is required, then the default parameters will need to be

modified.

Use the Wireless

Gateway’s web interface (Admin Tool) at http://10.0.0.1 to make any changes.

Web-based Configuration Utility

To access WECB’s configuration utility, open a web-browser (such as Internet Explorer) and

enter the default IP address of the WECB (192.168.0.50). If you are connected to the Wireless

Gateway 2 via Coax cable, then you will have to log in using the IP address assigned by the DHCP

server.

Example: (http://10.0.0.x) where“x”is something other than“1”

Select “User”from the User Name drop-down menu and then enter your password (“Null” by

default):

Note: The WECB will configure itself automatically when connected to a compatible Wireless

Gateway 2.

Altri manuali per DXN-W224

Indice

Altri manuali D-Link Router di rete

D-Link

D-Link DIR-516 Manuale utente

D-Link

D-Link DIR-819 Manuale utente

D-Link

D-Link DSL-200 Manuale utente

D-Link

D-Link DWR-112 Manuale

D-Link

D-Link Express Ethernetwork DI-704P Manuale utente

D-Link

D-Link DSL-2520U Manuale utente

D-Link

D-Link DIS-2650AP Manuale utente

D-Link

D-Link DSL-2730B Manuale utente

D-Link

D-Link DSL-2542B Manuale utente

D-Link

D-Link DVG-7044S Manuale utente

D-Link

D-Link DES-3550 Manuale utente

D-Link

D-Link DIR-300 - Wireless G Router Manuale utente

D-Link

D-Link DIR-868L Manuale utente

D-Link

D-Link 2Voice + 4SW VoIP Router DVG-1402S Manuale utente

D-Link

D-Link DIR-655 - Xtreme N Gigabit Router Wireless Manuale utente

D-Link

D-Link DVA-G3670B Manuale utente

D-Link

D-Link DSL-2540U Manuale utente

D-Link

D-Link DIR-868L Manuale utente

D-Link

D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Manuale utente

D-Link

D-Link DIR-130 - Broadband VPN Router Guida rapida

D-Link

D-Link DIR-845L Istruzioni operative e di sicurezza

D-Link

D-Link DSL-2740U Manuale utente

D-Link

D-Link DSL-2540U Manuale utente

D-Link

D-Link DIR-890L Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza