D-Link DP-311U Manuale utente
1
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DP-311U 03172003
If any of the above items are missing, please contact your reseller.
CD-ROM (Software, Manual and Warranty)
Before You Begin
DP-311U Wireless USB Print Server
Check Your Package Contents
DP-311U
2.4GHz Wireless
Print Server
5V DC 2.5A Power Adapter
Using a power
supply with a
different voltage rating
will damage this
product and void its
warranty.
This product can be setup using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 7.0
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a USB printer that will connect to the DP-311U.
Important: TURN OFF the power to the printer before installing
the DP-311U.
2
Next, make sure that the Printer is turned OFF.
Using the USB cable, connect one end of the cable to the USB port
of the DP-311U (shown below) and the other end to the USB port of
the printer. Turn ON the printer.
Then, plug one end of the power adapter into the DP-311U and the
other end into your electric outlet. The DP-311U will turn on and begin
a self-test.
Connecting The DP-311U To Your Network
For Mac OS printing, please refer to manual (.pdf) located on the CD-ROM.
USB Port
Receptor for
AC Power
Adapter Network Port
First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable
into the “Network Port” (shown below.) Connect the other end of the
cable to the LAN port of the gateway or switch. Note: Do not con-
nect the power cord to the DP-311U until you are advised to do
so.
Warning!
Only a USB printer may be connected to the USB port of the DP-311U. Do
not connect any other USB device to the USB port; doing so may damage
the unit, voiding the warranty for this product.
3
Setting up your DP-311U for network
printing in Windows XP
The factory default IP address of the DP-311U is 192.168.0.10. In order to
network to the printer through the DP-311U, the DP-311U must have the
same IP network settings as your network. IP address can be assigned
manually or automatically by DHCP, BOOTP or RARP. To access the
print server’s web configuration, manually assign an IP address on one of
the wired PC’s on your network to the same subnet as the print server.
For additional Windows operating system setup or information
on the web-management interface, refer to the manual located
on the CD-ROM.
Go to Start > right click on
My Network Places >
select Properties > Double-click on
the Network Connection associated
with your Network Adapter.
Input a static IP address in the
same range as the print server.
Click OK
Click Internet Protocol (TCP/IP)
Click Properties
Select Use the following IP address
IP address: 192.168.0.52
Subnet mask: 255.255.255.0
4
Setting up your DP-311U for network
printing in Windows XP (continued)
Using your web browser enter
the IP address of the DP-311U.
By default the IP address is set
to 192.168.0.10
The IP address of the DP-311U can
be modified on the Network tab of
the web configuration menu.
The following instructions use the print
server’s default IP address as an
example. Make the appropriate
changes if you modify the DP-311U’s
IP address.
Click OK
Click OK to apply IP address
settings.
5
Setting up your DP-311U for network
printing in Windows XP (continued)
What is Infrastructure and Ad-Hoc Mode?
Ad-Hoc: Refers to two or more 802.11b wireless devices that communicate directly
with one another without using an access point or any connection to a wired network.
Infrastructure: Refers to an 802.11 network in which wireless devices communicate
with each other by first going through an Access Point (AP) or wireless router.
Enter the ESS-ID of the
remote access point or
wireless router you wish to
connect to.
If you would like to set WEP Encryp-
tion, select the encryption level and
the key here.
Select your Connection Mode
Click Save
Click on the Configuration tab to
view the current Wireless Settings.
64 bit WEP encryption uses a 10 hexidecimal character key. 128 bit WEP
uses a 26 hexidecimal character key. The WEP encryption key must match
the WEP settings on your AP or wireless router to connect properly.
Write down on a piece of paper
the Port name that you wish to use.
A workgroup name of your Wireless Network. All wireless devices must all
have the same SSID to communicate on the Wireless Network. All D-Link
Wireless devices have the default SSID of default, all lower case.
What is an SSID?
How does WEP Work?
1
2
3
1
2
3
6
Select “Local Printer.”
Click Next
Please make sure to
deselect Automatically
detect and install my
Plug an Play printer.
Setting up your DP-311U for network
printing in Windows XP (continued)
Click Next
For Windows XP:
Go to Start>Printers and Faxes>Add
a Printer or Go to Start>Control
Panel> Printers and Faxes
Double-click on the
“Add Printer” icon
7
Setting up your DP-311U for network
printing in Windows XP (continued)
Select “Create a new port.”
At the pull-down menu, high-
light “Standard TCP/IP Port.”
Click Next
Click Next
Type in the IP address of the
print server. (i.e. 192.168.0.10)
The port name will automati-
cally be filled in.
Click Next
This may take a few seconds
8
Click Next
Setting up your DP-311U for network
printing in Windows XP (continued)
Click OK
Input the port name of
the port being used by
the printer
Select “LPR”
Select “Custom”
Then click on Settings.
Click Settings
9
Setting up your DP-311U for network
printing in Windows XP (continued)
In this window, scroll down to find
your printer. (If it is not listed, insert
the driver CD or diskette that came
with your printer.)
Click on “Have Disk...”
Then, scroll down and highlight the
printer.
Click Next
Click Finish
At this screen, you can input a
name for this printer.
Click Next
10
Your Setup is Complete!
The printer is now ready for printing
with Windows XP, on your network.
Click Finish
Setting up your DP-311U for network
printing in Windows XP (continued)
Select “Yes” to print a test page
Click Next
Altri manuali per DP-311U
2
Indice
Altri manuali D-Link Server di stampa
D-Link
D-Link DPR-1040 Manuale utente
D-Link
D-Link DP-802 Manuale utente
D-Link
D-Link AirPlus G DP-G301 Manuale utente
D-Link
D-Link DP-300U Manuale utente
D-Link
D-Link DP 301U Manuale utente
D-Link
D-Link DP-311P - Air Print Server Manuale utente
D-Link
D-Link 301P - DP Print Server Manuale utente
D-Link
D-Link DP-311P - Air Print Server Manuale utente
D-Link
D-Link DP 301U Manuale utente
D-Link
D-Link DP-301 Istruzioni per l'installazione
D-Link
D-Link DP-300U Manuale utente
D-Link
D-Link DP-101P+ Manuale utente
D-Link
D-Link DPR-1020 Manuale utente
D-Link
D-Link DI-713P Manuale utente
D-Link
D-Link AirPlus DP-G310 Manuale utente
D-Link
D-Link DP 301U Manuale dell'operatore
D-Link
D-Link DP 301U Manuale utente
D-Link
D-Link DPR-2000 Manuale utente
D-Link
D-Link AirPlus DP-G310 Manuale utente
D-Link
D-Link DP-300U Manuale utente
