D-Link DCH-G020 Manuale di installazione e d'uso

Altri manuali per DCH-G020

2

Indice

Altri manuali D-Link Interruttore

D-Link

D-Link DGS-1210-10P Manuale utente

D-Link

D-Link DAS-3626 Manuale utente

D-Link

D-Link mydlink Smart Plug Lite Manuale utente

D-Link

D-Link DGS-1100-10MP Manuale utente

D-Link

D-Link DGS-1210/ME series Manuale utente

D-Link

D-Link DKVM-2K Manuale utente

D-Link

D-Link DES-3326S - Switch - Stackable Manuale utente

D-Link

D-Link DUB-1340 Manuale utente

D-Link

D-Link DXS-1100-16SC Manuale utente

D-Link

D-Link xStack DGS-3600 Series Manuale utente

D-Link

D-Link DWS-1008 Manuale utente

D-Link

D-Link DGS-105 - Switch Manuale utente

D-Link

D-Link DKVM-4U Manuale utente

D-Link

D-Link DGS-1005A Manuale utente

D-Link

D-Link DSS-100E-18P Manuale utente

D-Link

D-Link DKVM-2K Manuale utente

D-Link

D-Link xStack DGS-3427 Manuale utente

D-Link

D-Link DKVM-2K Manuale utente

D-Link

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manuale utente

D-Link

D-Link DES-1005E Manuale utente

D-Link

D-Link DGS-1016A Manuale utente

D-Link

D-Link DQS-5000-32Q28 Manuale utente

D-Link

D-Link DSS-5 - 10/100 Switch, Desktop Manuale utente

D-Link

D-Link DKVM-2K Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuale utente

Dear customer,

To restore the DCH-G020 proceed as follows

In Case the LED is flashing red

-----------------------------------------

Manual update process for the DCH-G020:

-----------------------------------------

Log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the password is the pin

on the bottom of the device.

Please upload the following firmware (unzip the file and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

After the update, reset the DCH-G020 twice to 1. Activate the new firmware and 2. Reset the Z-Wave

controller. Please wait between the reset until the device is powered up again

After that log in to the web interface of the DCH-G020 again and upload the latest firmware.

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

The DCH-G020 should be running again with a green LED.

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

In Case the LED is constantly red

-----------------------------------------

Recoveryupdate for the DCH-G020:

-----------------------------------------

Download the following firmware (unzip first and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

1. Connect your pc with a cable to your router

2. Change the IP address of your LAN port to 192.168.0.123

3. Unplug the DCH-G020 and press the Reset button while you plug it back in. Hold the Reset

button until the LED is flashing red.

4. Open http://192.168.0.60 in a Webbrowser

5. Upload the firmware 1.23b02_beta

After the Upload the LED should be green again.

If the LED is still red, the DCH-G020 is defective please issue a RMA.

If the LED is green, please change your LAN port ipv4 settings back to DHCP and reset the DCH-G020.

After the reset log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the

password is the pin on the bottom of the device.

Upload the latest firmware

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

-----------------------------------------

If you have Z-Wave devices connected to the DCH-G020 before the issue you have to do the

following for every Z-Wave device

-------------------------------------

Reset the Z-Wave Device

-------------------------------------

For every Z-Wave Device:

1. Press the connect button on the DCH-G020

(LED flashing orange)

2. Press the black pin on the back of the device four times in two seconds.

3. And hold the pin at the four times until the device pulse red down.

The device will start flashing slowly red for the next two minutes; you have now two minutes to

reconnect the device with the DCH-G020 through the APP