1. BRIGHTNESS
When the lens is selected MANUAL, it can be
adjusted BRIGHTNESS.
2. SHUTTER
You can select either auto or manual shutter.
Shutter speed is fixed at 1/60sec(1/50sec)
▶A.FLK: Select this when you experience
picture flicker, which can happen when there
is a clash with the frequency of the installed lighting.
▶MANUAL : You can control shutter speed manually(1/60~1/120,000)
▶ESC : select this to control the shutter speed automatically.
If ESC is selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
Notes
• When you use a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be
disabled.
3. AGC(Auto Gain Control) : the higher the gain level, the brighter the screen,
but the higher the noise
▶OFF: Deactivates the AGC function.
▶LOW: Allows automatic gain control from 5.3dB to 32 dB
▶HIGH: Allows automatic gain control from 5.3dB to 37dB
4. SENS-UP : When it is night or dark, the camera automatically detects the light
level and maintains a clear picture if this mode is activated.
▶OFF: Deactivates the SENS-UP function
▶AUTO: Activates the SENS-UP function. It can be adjusted x2~x512.
Notes
• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
EXPOSURE
1. BRIGHTNESS 25
2. SHUTTER ESC
3. AGC HIGH
4. SENS-UP OFF
5.RETURN↙
