Daewoo DTS-42SP Manuale utente

48586200E10G-R1

PLASMA DISPLAY TV

SPEAKER

PLASMA TELEVISION

INSTRUCTION MANUAL

PLASMA DISPLAY TV

WALL HANGER UNIT

PLASMA DISPLAY TV

STAND

DTS-42SP

DTS-HG10

DP-HG10

DTS-HG20

DP-HG20

DTS-HG22

DP-HG22

DTS-42ST

PLASMA TELEVISION

SPEAKER

INSTRUCTION MANUAL

DTS-42SP

Thank you for purchasing the Daewoo Electronics Plasma Television Speakers. These

speakers are specifically designed only for the Daewoo Plasma Television. To ensure the

safe operation of the unit, please read these instructions before installing.

TABLE OF CONTENTS

1. Check for enclosed parts ............................ 2

2. Important Safety Instructions ...................... 3

3. Assembly Instructions ................................. 5

1) Using speakers when attached to the plasma display

PLASMA TELEVISION SPEAKER

1. PLEASE CHECK THE FOLLOWING ITEMS SHOWN BELOW

(2) (16)

(2) (4)

(2)

(4)

SPEAKER

M5 SCREWS

VIBRATION ABSORBENT SPONGE

SPECIAL SCREWS

/ ROUND HEAD SCREWS(OPTION)

SPEAKER WIRES

FIXED BRACKETS

STAND(OPTION )

(2)

CLAMP WIRE

(2)

2. IMPORTANT SAFETY INSTRUCTIONS

PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE TO THIS UNIT.

PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY

(Doing so may cause the unit to fall and break) (Failing to do so may cause the unit to vibrate and to fall)

(Failing to do so may cause the unit to fall and break) (Failing to do so can damage the speaker circuits resulting in fire)

(It can cause electric shock or injury to the child)

Do not use any parts other than those

enclosed. Do not leave out any part when assembling.

Please install all parts as indicated.

Do not alter or modify any parts Do not use the speakers with other products.

These speakers are specifically manufactured to be

used with the Daewoo Plasma display to enhance

your listening pleasure.

Do not allow a child to cling from or climb unto

the speakers Do not place the speakers on sloped or

unstable surfaces.

WARNING

CAUTION

WARNING : Disregarding these instructions can result in serious injury.

CAUTION : Disregarding these instructions will result in the mistreatment of

the unit and can result in injury or damage to the unit.

(Doing so may cause the speakers to fall off or

tip over causing injury and damage.)

PLASMA TELEVISION SPEAKER

Please be careful not to stain the speakers with

any gas or oil. When assembling, be sure to use the enclosed

parts and make sure all parts are tightly

screwed as instructed.

Do not place the speakers in a humid or dusty

place. Do not place the speakers near heating units.

Do not place speakers near a humidifier, or

cooking pots where speakers will be exposed

to steam or smoke.

Please be sure to connect (+) inputs and (-)

inputs correctly when connecting speakers to

plasma display.

PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INSTALLING OR HANDLING

(Failing to do so will cause the speakers to

vibrate and unable to produce clear sound.)

(Doing so will change the outer appearance)

(Failing to do so may alter the units)

(Failing to do so may cause discoloration or

damage to speakers) (If not connected correctly, it may result in distorted sound)

(Failing to do so will damage the speakers)

3. ASSEMBLING INSTRUCTIONS

USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY

ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS

INSTALLING FIXED BRACKETS TO SPEAKERS

.Clean the surface with soft, lint-free cloth

where sponges will be attached. .Attach the sponge to the side of the

speaker that will be attached to the

plasma display.

Please leave a 5 mm space on the top

and bottom when attaching. Do not

cover the entire side with the sponge

as shown in the picture above.

5mm

(2inch)

5mm

(2inch)

.Install fixed brackets to speakers before

attaching speakers to plasma display.

Please make sure which side the fixed

brackets will be screwed to,

considering the left and right side of

speakers as shown in the picture to

the left.

Fixed brackets

Sponge-attached side

Note

PLASMA TELEVISION SPEAKER

INSTALLING SPEAKERS TO THE PLASMA DISPLAY

.Place a protective covering over the surface you will be working on and lay

the plasma display as shown below.

.Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto

the fixed brackets to the squared holes in the back of the plasma display.

.Now tightly secure the

hooks with the M4 screws.

Hooks

Note

.Please be sure to secure the screws to avoid

any shaking or looseness.

CONNECTING SPEAKER WIRES

.Take the speaker wire(2) and use the red cord to connect to and fro (+) inputs,

and use the black cord to connect to and fro (-) inputs.

.Please be sure to connect red cord with (+) and black with (-); otherwise,

speakers will not produce clear sounds.

.Please retain the left over accessories.

.Connecting Clamp Wires:

- It is used keeping a speaker wire (A speaker wire is connected the back

side of main body) as a ficture.

Note

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente