Daewoo DWM-7010 Manuale utente
Service Manual
Model:DWM-7010/P
Washing Machine
DWM-7020/P
S/M No. : DM750MA001
JAN. 2003
DWM-7010
DWM-7020
• Caution:
In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO
WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
WASHING MACHINE
CCoonntteennttss
1. SPECIFICATIONS..................................................................................................... 1
2. EXTERNAL VIEW ..................................................................................................... 2
3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS ................ 3
4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY ..............................................7
5. TROUBLESHOOTING GUIDE ................................................................................10
6. EXPLODED VIEW AND PARTS LIST.....................................................................15
7. WIRING DIAGRAM ..................................................................................................23
NO. ITEM SPECIFICATIONS
1 POWER VOLTAGE AC 127V
SOURCE FREQUENCY 60Hz
2 POWER WASH 330W
CONSUMPTION
SPIN 180W
3 DIMENSION NET : 813X500X930, PACKED UP : 830X530X970 (WXDXH)
4 MACHINE WEIGHT NET : 29kg, PACKED UP : 32kg
5 WASHING COURSE STRONG, NORMAL
6 WATER LEVEL HIGH:62l, MEDIUM:54l, LOW:47l
7 REVOLUTION WASH 100 rpm
PER MINUTE SPIN 1700 rpm
8 TIMER WASH MAX. 15 min., Manual operation
SPIN MAX. 5 min., Manual operation
9 WASHER TYPE AGITATOR TYPE
10 SPIN TYPE CENTRIFUGALLY SEPARATED TYPE
11
MAXIMUM MASS
WASH 7.0 kg
OF TEXTILE SPIN 5.5 kg
12 WATER SUPPLY MANUAL
13 SPIN RINSE O
14 OUTLET OF DRAIN HOSE REAR
1. SPECIFICATIONS
3
SPECIFICATIONS
2. EXTERNAL VIEW
4
STRUCTURE
Structure Of The Wash Machine
F unctions of Control Panel
11WATER INLET - WASH
Connect inlet hose to supply water in the wash tub.
22WASH TIMER
Use to select the desired time for washing or rins-
ing.
33WASH ACTION
Use to select wash action. (“STRONG”, “NORMAL”)
44LEVER SELECTOR
Select “WASH.RINSE” for washing or rinsing, and
“DRAIN” to drain the water. (In case pump model,
turn on the DRAIN PUMP.) “OFF to turn off the
DRAIN PUMP. (Only pump model)
55SPIN TIMER
Used to select the desired time for spinning.
66WATER INLET - SPIN
Connect inlet hose to supply water in the spin tub.
DRAIN STRAINER
COVER SAFETY
DOOR SPIN
BASKET SPIN
PLATE T
DRAIN HOSE
CABINET
TUB
PUL SATOR
DOOR WASH
PANEL B
GUIDE FILTER
WATER INLET
WASH TUB
WASH TIMER WASH ACTION
NORMAL WASH/RINSE
OFF
DRAIN
0
1
2
3
4
5
0
3
6
9
12
15
STRONG
VALVE
SELECTOR
SPIN TIMER WATER INLET
SPIN TUB
FUNCTION
The main switch remains ON during the washing time set by turning the timer knob.
At the same time, the internal switch T1 and T2 which provide power to WASH MOTOR alternately at assigned Intervals.
Select switch knob sets the wash type by means of controlling the interval of internal switch contact.
STRUCTURE AND PRINCIPLE OF ACTIVATION
3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS
5
CONTROL PANEL
W ash Timer
CIRCUIT DIAGRAM
6
PROCEDURE
FUNCTION
The spin timer is the switch providing power to the SPIN MOTOR(DRAIN PUMP MOTOR) during the set spin dry
time, and is a spring-type time switch comes on upon turning and those contact points comes off after the set time.
STRUCTURE AND PRINCIPLE OF ACTIVATION
1) The main shaft turns due to the unwinding force when the spin timer is turned, the spring wound with that force
being delivered through each gear and the spring slowly unwinding at a speed finally controlled by the angle
assembly.
2) The contact point Turns ON and the assembly angle is set in motion which is in the CAM groove in the OFF
state, comes off the groove when the main shaft is turned to wind the spring. The contact point turns OFF,
return to CAM groove when the spring unwind completely.
SAFETY DEVICE FOR BASKET SPIN
The BASKET SPIN is an apparatus which eliminates the water from the laundry through centrifugal separation
generated by rapid revolution(approximately 1,600rpm for 60Hz). Accordingly, there are a DOOR SWITCH to cut
off the power going into the DOOR SPIN is opened and a brake system to stop the rotating BASKET SPIN.
DOOR SWITCH (Option)
When the DOOR SPIN is opened during spinning, the DOOR
SWITCH LEVER which sites atop the DOOR SPIN falls off the
contact, and cuts off the power going into the SPIN MOTOR.
Spin Timer
7
PROCEDURE
BRAKE SYSTEM (Option)
When the DOOR SPIN is opened, LINK WIRE which connect
to DOOR SPIN loosens. And then the BRAKE BAND touches
the DRUM COUPLING assemply and stops the SPIN DRYER
as it is pulled by the SPRING in the BRAKE FIX PLATE
assembly.
BRAKE BAND GAP CONTROL METHOD
(Option)
The BAND BRAKE works best when the gap between it and
the DRUM COUPLING is about 2mm when the DOOR SPIN
is closed. The SPIN DRYER stops slowly if the gap between
the two is too narrow, the SPIN DRYER revolution is affected
and the PLATE CONTROL WIRE may be adjusted to main-
tain the BRAKE BAND gap adequately.
WASH DECELERATOR ASSEMBLY
The initial deceleration following the activation of the WASH MOTOR takes place through the PULLEY MOTOR
and PULLEY PULSATOR, and the secondary deceleration is done by the gear in the GEAR HOUSING which also
increeases their revolution strength. This revolution speed and strength is delivered to the PULSATOR, which is
then able to cause water current that is strong yet soft so that wash loads are not damaged.
PLATE
CO NTROL WIRE
BA
BASE
SKET SPI N
AGITATOR ASS’Y
PULLEY
MOTOR
PULLEY AGITATOR
V-BELT
GEAR HOUSING
MOTOR WASH
About 1,700rpm
M-Pully (4:1)
PULLEY PULSATOR
About 425rpm
AGITATOR
About 100rpm
G/H (4.18:1)
8
PROCEDURE
GEAR HOUSING ASS’Y
The GRAR HOUSING ASSEMBLY is a transmission device which turns the Agitator at 4.18:1 lowered speed
through the gear unit assembly which receives power at the GEAR SHAFT UNIT.
1) The two sides of the GEAR SHAFT UNIT are supported by the
OILLESS BEARING in the GEAR HOUSING ASSEMBLY.
2) The GEAR UNIT ASSEMBLY is connected to the GEAR
SHAFT 1 and GEAR SHAFT UNIT by the GEAR and GEAR
UNIT respectively.
3) The two sides of GEAR SHAFT 1 are supported by the OIL
SEAL and OILLESS BEARING in the GEAR HOUSING
ASSEMBLY.
SPIN BELLOWS ASS’Y
The wrinkled rubber device on the botton of the BASKET SPIN is
called SPIN BELLOWS ASSEMBLY.
It has a waterseal and a oilless metal inside to prevent leakage
and so that the BASKET SPIN may work smoothly.
CLEANING THE OVERFLOW FILTER
1) Pull the overflow filter out from the wash tub by tugging.
2) Wash off, remove lint from the filter and also clean around the
overflow hose.
3) Reassemble by matching the two protrusions at the bottom of
the filter to the slits in the wash tub and then fix the filter into
position.
CLEANING THE DRAIN FILTER
1) To remove the agitator, remove the lint filter assembly.
2) Remove the screw from agitat and pull the agitator upward.
3) Using screw driver undo the securing screws.
4) Rinse the water and reinstal the lint filter.
SHAFT AGITATOR
OILLESS METAL
OILLESS METAL
GEAR
INNER GEAR
OILLESS METAL
SHAFT PULLEY
SPIN DRYER
SPIN DRYER SHAFT
BELLOWS
SPIN TUB
BELLOWS PACKING
CRUM COUPLING
OILLESS METAL
WATER SEAL
STRUCTURE
F ilt e r
9
4. DIRECTION FOR DISASSEMBOY AND ASSEMBLY
DIRECTIONS
1. Remove 5 screws on the panel 2. Remove 7 screws on the cover B.
R eplacing Wash Timer And Spin Timer
3. Remove connector and link valve. 4. Remove knob and 2 screws on the bracket panel.
5. Remove control lever and timer.
10
CONNECTION
1. Remove 2 screws on the cover B. 2. Separae harness as connectors.
R eplacing Motor For Spin And Was h
3. Remove bolt and nut on the upper side of the drum
coupling as and lift up the basket spin.
4. Remove 1 screw fixing cabinet.
7. Remove 3 screws on the base and Remove wash
motor.
8. Remove 3 screws and spin motor.
5. Remove bolt connecting motor pulley and pulsator
pulley.
6. Remove panel front and 3 screws on flange of the
tub. And lift up the tub assembly.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Daewoo Rondella
Daewoo
Daewoo WM812T1WU0BG Manuale utente
Daewoo
Daewoo DWF-6010AP Manuale utente
Daewoo
Daewoo DWF-178L Manuale utente
Daewoo
Daewoo DWF-753 Manuale utente
Daewoo
Daewoo D-CV701PC Series Manuale utente
Daewoo
Daewoo DWF-5510 Manuale utente
Daewoo
Daewoo DWF-803 Manuale utente
Daewoo
Daewoo DWC-LD141X Manuale utente
Daewoo
Daewoo DWF-190SL Manuale utente
Daewoo
Daewoo DWF-200M(V) Manuale utente
Daewoo
Daewoo DWD-M10E6 Manuale utente
Daewoo
Daewoo DWD-FU1041 Manuale utente
Daewoo
Daewoo DWM-3600 Manuale utente
Daewoo
Daewoo DWC-UD1212 Manuale utente
Daewoo
Daewoo DWF-820W Manuale utente
Daewoo
Daewoo DW-500M Manuale utente
Daewoo
Daewoo DWF-5510P Manuale utente
Daewoo
Daewoo DWDNU1221 Manuale utente
Daewoo
Daewoo DWC-ED1213 Manuale utente
Daewoo
Daewoo DWF-1098 Manuale utente
