Dahua Technology 50430UN Manuale utente
4 MP PTZ Network Camera
50430UN
59430UN
Quick Start Guide
Version 001.001
Dahua Technology USA Inc.
Table of Co te ts
1 Welcome..........................................................................................................................1
1.1 Important Safeguards and Warnings..................................................................1
Electrical safety...................................................................................................1
En ironmental Precautions.................................................................................2
Operation and Daily Maintenance......................................................................3
Warnings.............................................................................................................3
1.2 FCC Information..................................................................................................4
FCC compliance：..............................................................................................4
1.3 Legal Notices......................................................................................................4
Copyright.............................................................................................................4
Trademarks.........................................................................................................4
1.4 Disclaimer...........................................................................................................5
2 Unpacking........................................................................................................................6
3 Installation and Configuration..........................................................................................7
3.1 Camera Configuration and Cables.....................................................................7
3.2 Framework and Dimensions...............................................................................8
3.3 Alarm Setup........................................................................................................8
Alarm Input..........................................................................................................8
Alarm Output – Le el Application.......................................................................9
Alarm Output – Switch Application.....................................................................9
3.4 Locally Storing Data..........................................................................................10
4 De ice Installation.........................................................................................................11
4.1 Installing the Camera........................................................................................11
5 Network Configuration...................................................................................................14
5.1 Network Protocols.............................................................................................14
5.2 Modifying the IP Address..................................................................................15
5.3 Using the ConfigTool........................................................................................15
5.4 Accessing the Web Interface............................................................................16
5.5 Configuring Alarms...........................................................................................17
5.6 Configuring Local SD Card Recording.............................................................17
1 Welcome
This manual offers reference material and general information about the basic operation,
maintenance, and troubleshooting of the Dahua Multi-Sensor Panoramic Camera. Read, follow, and
retain the following safety instructions. Heed all warning on the unit and in the operating instructions
before operating the unit. Keep this guide for future reference.
1.1 Importa t Safeguards a d War i gs
Electrical safety
Install the unit in accordance with the manufacturer’s instructions and in accordance with
applicable local codes.
All installation and operation must conform to your local electrical safety codes.
Do not o erload outlets and extension cords, which may cause fire or electrical shock.
Do not place the camera near or in a place where the camera may contact o erhead power
lines, power circuits, or electrical lights.
Ensure power conforms to SELV (Safety Extra Low Voltage) and that the limited power source is
rated AC 24V as specified in IEC60950-1. (Power supply requirement is subject to the de ice
label).
All input/output ports are SELV circuits. Ensure that SELV circuits are connected only to other
SELV circuits.
Ground the unit using the ground connection of the power supply to protect the unit from
damage, especially in damp en ironments.
Protect the plug and power cord from foot traffic, being pinched, and its exit from the unit.
Units with or without an ON/OFF switch ha e power supplied to the unit whene er the power
cord is inserted into the power source; howe er, the unit is operational only when the ON/OFF
switch is in the ON position. The power cord is the main power disconnect de ice for switching
off the oltage for all units.
Operate the unit only from the type of power source indicated on the label. Before proceeding,
disconnect the power from the cable to be installed into the unit.
For external power supplied units, use only the recommended or appro ed power supplies.
Limited power sources must comply with EN 60950. Substitutions may damage the unit or
cause fire or shock.
For 24 VAC units, oltage applied to the unit’s input power should not exceed ±25%. User-
supplied wiring must comply with local codes (Class 2 power le els). Do not ground the
supply at the terminals or at the unit’s power supply terminal.
Contact the local dealer or the power company to erify the correct power supply.
Do not supply power ia the Ethernet connection (PoE) when power is already supplied ia the
power connector.
Do not attempt to ser ice the unit. Opening or remo ing co ers may expose you to dangerous
oltage or other hazards. Refer all ser icing to qualified personnel.
1
If the unit is damaged and requires ser ice, unplug the unit from the main AC power supply and
from the PoE supply and refer to qualified ser ice personnel. Damage may include, but is not
limited to:
The power supply cord or plug is damaged.
Liquid has spilled in or on the unit.
An object has fallen on the unit.
The unit has been dropped and the housing is damaged.
The unit displays a marked change in performance.
The unit does not operate in the expected manner when the user correctly follows the proper
operating procedures.
Ensure a ser ice technician uses replacement parts specified by the manufacturer, or that ha e
the same characteristics as the original parts. Unauthorized parts may cause fire, electrical
shock, or other hazards. Dahua is not liable for any damage or harm caused by unauthorized
modifications or repairs.
Perform safety checks after completion of ser ice or repairs to the unit.
Use attachments and accessories only specified by the manufacturer. Any change or
modification of the equipment, not expressly appro ed by Dahua, could oid the warranty.
Incorporate a readily accessible disconnect de ice in the building installation wiring for quick
power disconnect to the camera.
Dahua assumes no liability or responsibility for any fire or electrical shock caused by improper
handling or installation.
E viro me tal Precautio s
Do not aim the unit at a strong light source or into direct sunlight to focus. A strong light source
may cause o erexposure and may affect the longe ity of the CCD or the CMOS sensor.
Transport, use, and store the unit within the specified temperature and humidity range.
Do not place the unit in a wet, dusty, extremely hot or an extremely cold en ironment; and a oid
en ironments with strong electromagnetic radiation or unstable lighting.
Ne er push objects of any kind into this unit through openings as they may touch dangerous
oltage points or cause a short circuit that may result in fire or electrical shock. Take care to not
spill any liquid on the unit.
Do not use units intended for indoor applications near water, in damp or wet en ironments, or in
any area classified as a wet location. Do not expose an indoor unit to rain or moisture to reduce
the risk of fire or electric shock.
Do not block or co er any openings in the unit enclosure. These openings are pro ided for
entilation to pre ent o erheating and to ensure reliable operation. Ensure the unit is placed in
an area with adequate entilation.
Do not place the unit near a heat source such as heaters, sto es, radiators or other equipment
that produces heat.
Pack the unit with standard factory packaging or material of the same quality when transporting
the unit.
Take care to a oid hea y stress, iolent ibration, or water spills to the camera unit during
transportation, storage, and installation.
2
Operatio a d Daily Mai te a ce
Do not touch the heat dissipation component of the unit. This part of the unit is hot and may
cause a burn.
Do not open or dismantle the de ice; there are no components that a user can fix or replace.
Opening the unit may cause water leakage or expose components to direct light. Contact the
manufacturer or a qualified ser ice representati e to ser ice the camera or to replace a
component, including the desiccant.
Dahua recommends the use of a thunder-proof de ice in concert with the unit.
Do not touch the CCD or the CMOS optic sensor. Use a blower to clean dust or dirt on the lens
surface. Use a dry cloth dampened with alcohol and gently wipe away any dust on the lens.
Use a dry soft cloth to clean the unit’s housing. If the unit is particularly dusty, use water to dilute
a mild detergent, apply the diluted detergent to a soft cloth, then gently clean the de ice. Finally,
use a dry cloth to wipe the unit dry. Do not use a olatile sol ent like alcohol, benzene, or
thinner; or use a strong detergent with abrasi es, which may damage the surface coating or
reduce the working performance of the unit.
Do not touch or wipe a dome co er during installation, this co er is an optical de ice. Refer to
the following methods clean the dome co er:
Stained with dirt: Use an oil-free soft brush or blower to gently remo e the dirt.
Stained with grease or fingerprints: Use a soft cloth to wipe gently the water droplet or the oil
from the dome co er. Then, use an oil-free cotton cloth or paper soaked with alcohol or
detergent to clean the lens from the center of the dome to outside. Change the cloth se eral
times to ensure the dome co er is clean.
Lifti g Applia ce Requireme t
Select the proper PTZ dome installation mode and use the proper lifting de ice to safely lift the
camera at the installation site.
Ensure that the lifting de ice has the proper capacity to reach the installation height.
Use the lifting de ice in accordance with its operating instructions and abide by the de ice’s
safety precautions.
War i gs
Change the default password after the initial login to protect the integrity of the network.
Use the standard accessories pro ided by the manufacturer and ensure the unit is installed and
commissioned by qualified professionals.
Protect the lens area from laser radiation when using a laser de ice to aid in installation and
le eling of the unit.
Do not supply power ia the Ethernet connection (PoE) when power is already supplied ia the
power connector.
3
1.2 FCC I formatio
This de ice complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This de ice may not cause harmful interference;
This de ice must accept any interference recei ed, including interference that may cause
undesired operation.
FCC complia ce：
This equipment has been tested and found to comply with the limits for a digital de ice, pursuant to
part 15 of the FCC Rules. These limits are designed to pro ide reasonable protection against harmful
interference. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communication. Howe er, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or tele ision reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the recei ing antenna.
Increase the separation between the equipment and recei er.
Connect the equipment into an outlet on a circuit different from that to which the recei er is
connected.
Consult the dealer or an experienced radio/TV technician for help.
1.3 Legal Notices
Copyright
This user guide is ©2016, Dahua Technology Company, LTD.
This user guide is the intellectual property of Dahua Technology Company, LTD and is protected by
copyright. All rights reser ed.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
4
1.4 Disclaimer
This user guide has been compiled with great care and the information it contains has been
thoroughly re iewed and erified. The text was complete and correct at the time of printing. This
guide may be periodically updated to reflect changes to the product or to correct pre ious
information and the content of this guide can change without notice. If you encounter an error or
ha e any questions regarding the contents of this guide, contact customer ser ice for the latest
documentation and supplementary information. Dahua accepts no liability for damage resulting
directly or indirectly from faults, incompleteness, or discrepancies between this guide and the
product described. Dahua is not liable for any loss caused by installation, operation, or
maintenance inconsistent with the information in this guide.
Video loss is inherent to all digital sur eillance and recording de ices; therefore Dahua cannot be
held liable for any damage that results from missing ideo information. To minimize the
occurrence of lost digital information, Dahua recommends multiple, redundant recording
systems, and adoption of backup procedure for all data.
Contact the supplier or customer ser ice if you encounter any issue while using this unit.
5
2 U packi g
This equipment should be unpacked and handled with care. If an item appears to ha e sustained
damage during shipping, notify the shipper immediately.
Verify that all the parts listed below are included. If an item is missing, contact customer support or
your local representati e.
The original packing carton is the safest container to transport the unit, in the e ent the unit must be
returned for ser ice. Retain the carton and all shipping material for future use.
Please refer to the enclosed CD for more details, to iew the detailed User’s Manual, and for
configuration software.
2.1 Parts List
Package Item
Quantity
Network PTZ Camera
1
Quality Tag
1
Pair of Glo es
1
Installation Hardware Pack
1
Expansion Bolts
3
Screws
3
Hex Key
1
Wall Mount Accessory Kit
1
Wall Mount Adapter
1
Wall Mount Adapter
1
24 VAC Power Supply
1
Quick Start Guide
1
Documentation CD
1
2.2 Tools a d Hardware Required
Package Item
Quantity
Screwdri er
1
Expansion Bolts (size?)
1
Hex Bolts (size?)
1
Screws?
1
3
3
1
1
1
1
1
1
1
6
3 I stallatio a d Co figuratio
3.1 Framework a d Dime sio s
The following figures show the dimensions of the de ice in mm (in.). These images are intended
as a reference only.
Figure 3-1: Dime sio s for 50430UN
7
Figure 3-2: Dime sio s for 59430UN
3.2 Wiri g
The dome camera includes the following wiring bundles:
Wire Color Co ectio
Power Red 24 VAC
Yellow/Green Earth Ground
Black 24 VAC
Video/Co trol Black RJ-45 Ethernet
Alarm Red Alarm IN 1
Brown Alarm IN 2
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Dahua Technology Telecamera di sicurezza
Dahua Technology
Dahua Technology D-IPC-HFW1430DSP-SAW-0280B Manuale utente
Dahua Technology
Dahua Technology N82AL32 Manuale utente
Dahua Technology
Dahua Technology N42BD32 Manuale utente
Dahua Technology
Dahua Technology IPC-HFW1230S1-0280B-S5 Manuale utente
Dahua Technology
Dahua Technology PC-EBW81242 Manuale utente
Dahua Technology
Dahua Technology HAC-HDBW2401RP-Z Manuale utente
Dahua Technology
Dahua Technology D-IPC-HUM8441-E1-L1 Manuale utente
Dahua Technology
Dahua Technology DH-IPC-HFW3 Manuale utente
Dahua Technology
Dahua Technology D-IPC-HDBW3841EP-S-0280-S2 Manuale utente
Dahua Technology
Dahua Technology N52BF5Z Manuale utente
Dahua Technology
Dahua Technology DH-IPC-PFW8601N-H-A180 Manuale utente
Dahua Technology
Dahua Technology IPC-HDW3549H-ZAS-PV-27135 Manuale utente
Dahua Technology
Dahua Technology IPC-HFW2531T-ZS-S2 Manuale utente
Dahua Technology
Dahua Technology EZ-IP BULLET Manuale utente
Dahua Technology
Dahua Technology IPC-HFW2431DG-4G Manuale utente
Dahua Technology
Dahua Technology 49925TNI Manuale utente
Dahua Technology
Dahua Technology IR Eyeball Manuale utente
Dahua Technology
Dahua Technology DH-IPC-HDW1230T1P-S4 Manuale utente
Dahua Technology
Dahua Technology DH-IPC-PDW3849-A180-AS-PV-ANZ Manuale utente
Dahua Technology
Dahua Technology DH-IPC-HFW3849T1P-AS-PV-S3-BLK Manuale utente
