Danfoss BasicPlus2 WT-T Manuale utente
Installation Guide
BasicPlus2WT-T
Room thermostat
VICUL202 Danfoss Heating Solutions
2
Installation Guide BasicPlus2WT-T Room Thermostat
GB
1. Installation Steps
1. Installation must be done by an authorised
electrician.
2. The room thermostat should be installed at approx.
1.5 m above oor and where the eects of sunlight,
draught or other heat sources (eg. TV’s) are avoided,
see g. 1.
3. First of all, carefully remove the cover and dial knob,
see g. 2.
4. Connect the wire before mounting the back plate to
the wallbox using the enclosed screws. Then mount
the cover to the back plate, see g. 3.
2. Wiring
See g. 4 for dimensions and g. 5 for wiring diagram.
WT-T is often used with a Danfoss TWA actuator.
Depending on the conditions of power location and
actuator type (NC or NO), the wiring between room
thermostat and actuator is dierent.
Follow the illustrations to complete the wiring.
1. When power supply location is close to room
thermostat:
• Connect to actuator TWA 230 V NC type, see g. 6.
• Connect to actuator TWA 230 V NO type, see g. 7.
2. When power supply location is close to actuator:
• Connect to actuator TWA 230 V NC type, see g. 8.
• Connect to actuator TWA 230 V NO type, see g. 9.
Danfoss Heating Solutions VICUL202
3
Installation Guide BasicPlus2WT-T Room Thermostat
GB
3. Notes
1. Correct wiring is essential; using instrument to con-
rm L and N before wiring is recommended.
2. Don’t remove too much of the insulation cover from
the wire to avoid short circuit caused by the naked
wire touching the metal 86 size mounting wall box.
3. Don’t let the screw press or touch the wire when
using screws to x room thermostat in wall box. A
short-circuit risk exists if the wire insulation cover is
damaged by the screw, and if the naked wire con-
nects with the screw.
4. If walls must be painted, mount the room thermo-
stat after painting, to avoid dust or paint material
penetrating the room thermostat and thus damag-
ing the PCB.
5. The max. load of relay is 3 A (resistive) or 1 A (induc-
tive, such as pump or motor). The relay will be dam-
aged if the load exceeds the limit.
6. Don’t cover the thermostat, for instance by hanging
towels directly in front of it.
7. The room thermostat should be connected to the
corresponding loop actuator in individual room
temperature control.
VICUL202 Danfoss Heating Solutions
4
Installation Guide BasicPlus2WT-T Room Thermostat
GB
4. Technical Specications
Feature Description
Approval CE Marking, EN60730
Ambient temperature -10 - 60° C
IP Class 30
Max. load, inductive <1 A
Max. load, resistive <3 A
Power consumption 7 W
Power supply 230 Vac ±10%, 50/60 Hz
Room temp. set range 5 - 30° C
Shell material ABS + PC
Danfoss Heating Solutions VICUL202
5
Installation Guide BasicPlus2WT-T illustrations
Fig. 1
1.5 m
Fig. 2
Fig. 3
VICUL202 Danfoss Heating Solutions
6
Installation Guide BasicPlus2WT-T illustrations
Fig. 4
Fig. 5
N
L
NO
NC
230 V
~
Fig. 6
NC NO L N
N
230 V
~
L
TWA
230V
NC
WT-T
Danfoss Heating Solutions VICUL202
7
Installation Guide BasicPlus2WT-T illustrations
Fig. 7
NC NO L N
N
230 V
~
L
TWA
230V
NO
WT-T
Fig. 8
NC NO L N
N
230
V ~
L
TWA
230V
NC
WT-T
Fig. 9
NC NO L N
N
230
V ~
L
TWA
230V
NO
WT-T
Danfoss A/S
Floor Heating Hydronics
Ulvehavevej 61
DK-7100 Vejle
Denmark
Phone...+45 7488 8500
Fax ......+45 7488 8501
E-mail ...heating.solutions@danfoss.com
www.heating.danfoss.com
VICUL202 Produced by Danfoss Floor Heating Hydronics 03/2015
Danfoss can accept no responsibility for possible errors in catalogues, brochures and
other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be
made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Indice
Altri manuali Danfoss Termostato
Danfoss
Danfoss ECL Comfort 210 Manuale utente
Danfoss
Danfoss CET2000B-RF + RX1-S + CS2 Manuale utente
Danfoss
Danfoss TP5E Manuale utente
Danfoss
Danfoss RET2000 B Manuale utente
Danfoss
Danfoss RET1000 MD Manuale utente
Danfoss
Danfoss RET 230 HCW-3 Manuale utente
Danfoss
Danfoss ECtemp 130 Manuale utente
Danfoss
Danfoss TP7000 Series Manuale utente
Danfoss
Danfoss ECtemp 610 Manuale utente
Danfoss
Danfoss CP10C Manuale utente
Danfoss
Danfoss ECL Comfort 210 Manuale utente
Danfoss
Danfoss RET2000 B Manuale utente
Danfoss
Danfoss ECtemp Next Plus Manuale utente
Danfoss
Danfoss TP4000 Range Manuale utente
Danfoss
Danfoss TP5000-RF Istruzioni operative
Danfoss
Danfoss FHV-R Manuale utente
Danfoss
Danfoss RESD Series Manuale utente
Danfoss
Danfoss RT 14E Manuale utente
Danfoss
Danfoss HC8000 Series Manuale utente
Danfoss
Danfoss RA 2000 valve Manuale utente
