DataExpert MLX8440-0S Manuale utente

TRADEMARKSTM

PS/2TM is a registered trademeark of international Business Machines Corp.

PentiumTM , and P54CTM are registered trademarks of Intel Corp.

IBM registered trademark of International Business Machines Corp.

Windows95TM and Plug and PlayTM are registered trademarks of Microsoft Corp.

PCITM is a registered trademark of the PCI Special Interest Group.

VESATM is a trademark of the Video Electronics Standards Association.

All trademarks are the properties of their respecitve owners

MLX8440-0S

User's Manual Version A

The information

presented in this

publication has

been carefully for

reliability;

however, no

responsibility is

assumed for

inaccuracies.

Specifications are

subject to change

without notice.

Introduction ............................................................ 1

1-1 KeyFeatures............................................................... 2

1-2 Static Electricity Precautions ..................................... 4

1-3 What's included in the package ................................. 4

Hardware Configuration......................................... 5

2-1 Mainboard Component Locations.............................. 6

2-2 Power Precautions..................................................... 7

2-3 Connectors................................................................. 7

2-4 Jumper Settings ......................................................... 8

PW1 ATX Power Supply Connector............... 9

Keyboard Connector ................................................ 10

PS/2 Mouse Connector............................................ 10

USB (Universal Serial Bus Connector) .................... 10

COM1, COM2 Serial Port Connectors ..................... 10

LPT1 Parallel (Printer) Connectors.......................... 10

MIDI/GAME/Audio Port ............................................ 10

J1 KBLOCK, SPK, RST, HDLED, SUSLED,

Suspend Switch................................... 11

JPX CPU Speed Selectors.......................... 13

JP1 CPU Internal Clock Speed Selectors .. 13

JX1 CPU FAN POWER .............................. 13

System FAN POWER .............................................. 13

J4 IR Connector ....................................... 13

Sony/Panasonic Connector ..................................... 14

FLOP1 Floppy Drive Connector....................... 14

IDE1 Primary IDE Connector........................ 14

IDE2 Secondary IDE Connector................... 14

2-5 Installing Pentium II Processor in Slot 1 .................. 15

2-6 Memory Installation.................................................. 17

AWARD BIOS Setup ............................................. 19

3-1 Award BIOS Setup................................................... 20

3-2 Main Menu Options.................................................. 21

STANDARD CMOS SETUP..................................... 21

BIOS FEATURES SETUP ....................................... 23

CHIPSET FEATURES SETUP ................................ 26

POWER MANAGEMENT SETUP............................ 28

PNP/PCI SLOT CONFIGURATION ......................... 31

LOAD SETUP DEFAULTS....................................... 32

INTEGRATED PERIPHERALS SETUP................... 33

USER PASSWORD SETTING................................. 35

IDE HDD AUTO DETECTION.................................. 35

SAVE & EXIT SETUP .............................................. 36

EXIT WITHOUT SAVING......................................... 36

Audio Installation ................................................. 37

4-1 Product Features .................................................... .38

4-2 DOS and Windows 3.1and Winodws 95 Applications .

Installation ............................................................. 39

4-3 YAMAHA Audio Rack Software ............................... 40

Hardware Monitor Setup/AGP Utility................... 41

A-1 System Health Monitor Utility................................... 42

A-2 Installing the Utility ................................................... 43

A-3 Application ............................................................. 43

A-4 AGP and 8440LX chip Utility ................................... 44

Page : 1

Chapter 1 Introduction 1

Chapter 1

Introduction

The mainboard is a high-

performance mainboard based

on the advanced PENTIUMTM

II microprocessor, the AGP,

PCI Local Bus and the Intel

440LX chipset.

The mainboard offers a high

degree of flexibility in

configuration and is fully IBM

PC compatible.

Chapter 1

Page : 2

1Introduction

1-1 KeyFeatures

§Intel 440LX AGPsetTM chipset

§Support either 233~333 MHz PENTIUMTM II and CeleronTM CPUs

with Slot 1.

§Uses 168-pin DIMM modules x 3 auto banking in multiple

configuration up to 384MB.

§Supports SDRAM and 3.3V EDO DRAM.

§4 PCI Local Bus slots, and 2 x 16 bits ISA Bus slots.

§All 4 PCI slots support Master mode.

§Supports 32-bits A.G.P. (Accelerated Graphics Port) slot x 1.

§System BIOS support 4 IDE harddisk drivers that don't need device

driver for S/W application, the capacity each harddisk can large

than 528MB up to 8.4GB.

§PCI Bus master IDE interface on board with two connectors support

4 IDE devices in 2 channel, the PCI IDE Controller supports PIO

Mode 0 to Mode 4, Bus master IDE DMA Mode 2 and Ultra DMA

33MB/sec.

§On board super Multi-I/O chip that support 2 serial port with 16550

Fast UART compatible, 1 parallel port with EPP and ECP capabilities,

and a floppy disk drive interface.

§On board support PS/2 mouse Connector.

§On board support PS/2 Keyboard Connector.

§2 x Universal Serial Bus (U.S.B) on board

§Support Ir connector. (optional)

Page : 3

Chapter 1 Introduction 1

§System BIOS supports Green feature function, Plug and Play Flash

ROM.

§Use switching regulator to support CPU core voltage.

§Supports LS-120 floppy disk drive (120MB).

§Supports YAMAHA YMF715 16-bits stereo audio controller. Sound

Blaster 16/PRO compatible with stereo voice up to 48KHz sampling

rates.

§Daul channel game port. (supports Microsoft game-pad up to 8

ports).

§Supports 3V, 5V and 12V 20-pins ATX power connector.

§ATX form factor : 180mm x 305 mm

§Hardware Monitor :

Support CPU/System FAN status monitoring and alarm, CPU voltage,

system temperature monitoring.

§Poly switch resettable fuse over current protection for keyboard and

mouse

Chapter 1

Page : 4

1Introduction

1-2 Static Electricity Precautions

Static electricity can easily damage your mainboard.

Observing a few basic precautions can help you safeguard against

damage that could result in expensive repairs. Follow the measures

below to protect your equipment from static discharge:

§Keep the mainboard and other system components in their anti-

static packaging until you are ready to install them.

§Touch a grounded surface before you remove any system component

from its protecive anti-static packaging. A grounded surface within

easy reach is the expansion slot covers at the rear of the system

case. or any other unpainted portion of the system chassis.

§During configuration and installation, touch a grounded surface

frequently to discharge any static electric charge that may build up

in your body. Another option is to wear a grounding wrist strap.

§When handling a mainboard or an adapter card, avoid touching its

components. Handle the mainboard and adapter cards either by

the edges or by the mounting bracket that attaches to the slot opening

in the case.

1-3 What 's included in the package?

The mainboard comes packed in a sturdy cardboard shipping carton.

The carton contains :

§The Mainboard

§The User's Guide

§The 440LX Utility

Page : 5

Chapter 2 Hardware Configuration 2

Chapter 2

Hardware Configuration

Before you install the

mainboard into the system

chassis, you may find it

convenient to first configure

the mainboard hardware.

This chapter describes how

to set jumpers and install

memory modules, and where

to attach components.

Chapter 2

Page : 6

Hardware Configuration

2-1 Mainboard Component Locations

Figure 2-1 Mainboard Component Locations

JP1

RT1

JPX

K/B

Mouse

USB

COM1

COM2

AGP SLOT

PCI SLOT3

PCI SLOT4

PCI SLOT2

PCI SLOT1

ISA SLOT1

ISA SLOT2

Printer

MIDI/

GAME/

AUDIO

Panasonic

Sony

BIOS

JX1

Page : 7

Chapter 2 Hardware Configuration 2

2-2 Power Precautions

Before you begin configuration, make sure you are working with an

unplugged mainboard. Many components are powered by low-voltage

current, but there still may be a dangerous electric current coming from

the leads and power supply. You should take the following precautions:

§Turn off the power supply, and unplug the power cord

before you begin

§Unplug all cables that connect the mainboard to any

external devices.

2-3 Connectors

Attach system components and case devices to the mainboard via the

mainboard connectors. A description of each .i.connector; and its

connector pins follows. See Figure 2-1 for the location of the connectors

on the mainboard.

Note:

Before making connections to the board, make sure that

power to the system is turned off.

Indice

Altri manuali DataExpert Scheda madre

DataExpert

DataExpert MBX8440 Manuale utente

DataExpert

DataExpert MLX8440 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente