Datalogic CBX500 Manuale utente

CBX500

INSTALLATION MANUAL

Figure A

821001383 (Rev. C)

Indicator LEDs

Cover Screws (4)

Host Interface Module Panel

Compression Connectors (5)

25-pin Device Connector

CBX500 INSTALLATION MANUAL

Figure B

Power Switch (ON/OFF)

Device Chassis Grounding Selector

Mounting Holes (2)

I/O Extension Module Connector

Backup Module Connector

Indicator LEDs

RS485 Termination Resistance Switch

ID-NET™ Termination Resistance Switch

Auxiliary Port Connector

IP65 Host Interface Module Connector

Standard Host Interface Module Connector

Spring Clamp Terminal Blocks

Shield to Protection Earth Selector

Power Source Selector

CBX500 INSTALLATION MANUAL

SUPPORT THROUGH THE WEBSITE

This Installation Manual is available for download on our website.

Datalogic provides several services as well as technical support through its website. Log on

to www.datalogic.com and click on the Industrial Automation links for further information:

PRODUCTS –FIXED INDUSTRIAL BARCODE READERS

Select your product from the links on the Fixed Industrial Barcode Readers page. The

product page describes specific Info, Features, Applications, Models, Accessories, and

Downloads including documentation, software drivers, and utility programs.

SUPPORT & SERVICES –INDUSTRIAL AUTOMATION

Several links from the Industrial Automation list take you to additional services such as:

Service Program which contains Maintenance Agreements and Warranty Extensions;

Repair Centers; On-Line RMA Return Material Authorizations; Technical Support through

email or phone; Downloads for additional downloads.

DESCRIPTION

The CBX500 is a connection box which can be used as an accessory to facilitate system

connections for installation and device replacement of several Datalogic family reading

devices.

System cabling is made through spring clamp terminal blocks inside the CBX500 while the

reading device is connected to the CBX500 through a 25-pin connector on the housing.

A 9-pin connector placed inside the CBX500 facilitates connection between an external PC

and the auxiliary serial interface of the reading device for configuration or data monitoring.

CBX500 can also house several accessories which make the system highly flexible. These

include:

Backup Module - to backup and restore system configuration parameters making

system maintenance extremely quick and easy.

Display Module –to show reading device menu and diagnostic messages at the

CBX500.

Several Host Interface Modules - to interface the scanner with the most popular

Fieldbus and non-Fieldbus network types: Ethernet/IP, Profibus; DeviceNet, etc.,

including IP65 protection versions.

Mounting Adapters –to provide easy mounting to DIN rails and Bosch profiles.

M12 Panel Connectors for direct connection using standard cables and IP65

protection.

CBX500 INSTALLATION MANUAL

ACCESSORIES

The following accessories are available on request for the CBX500:

Name

Description

Part Number

* BM100

Backup Module

93ACC1808

* BM150

Display Module

93ACC1809

* BM200/210

Ethernet TCP/IP Module STD/IP65

93ACC1851, 93ACC1852

* BM300/310

Profibus Module STD/IP65

93ACC1810, 93ACC1811

* BM400

DeviceNet Module IP65

93ACC1814

* BM500/510/520

EtherNet/IP Module STD/IP65/IP54

93ACC1812, 93ACC1813,

93ACC1840

* BM600

CANopen Module STD

93ACC1815

* BM700/710

Profinet Module STD/IP65

93ACC1816, 93ACC1886

* BM1100

CC-Link Module STD

93ACC1845

* BM1200/1210

Modbus TCP STD/IP65

93ACC1848, 93ACC1849

BA100

DIN Rail Adapters

93ACC1821

BA200

Bosch Adapters

93ACC1822

BA300

M12 3PF Service Connector

93ACC1877

BA400

M12 3PM External Power Connector

93ACC1853

BA500

M12 4PF Trigger Connector

93ACC1854

BA600

M12 5PF ID-NET Out Connector

93ACC1855

BA700

M12 5PM ID-NET In Connector

93ACC1856

BA900

Two Cable Compression Conn. Panel

93ACC1847

NOTE: Not all readers support all CBX accessories. Compatibility

between the accessories marked with an asterisk (*) and your reader

depends on the reading device application software. See the "Accessories"

paragraph in your reading device Reference Manual for the list of supported

CBX Series accessories.

SAFETY PRECAUTIONS

ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT

POWER SUPPLY

This product is intended to be installed by Qualified Personnel only.

This product is intended to be connected to a UL Listed Direct Plug-in Power Unit marked LPS

or “Class 2”.

CAUTION: Total power consumption is given by adding the CBX500 power

consumption to that of all the devices powered through the CBX500 (reading

device, P.S., I/O). Refer to the manual of the connected devices for details

about minimum/maximum supply voltage and power consumption.

Each CBX500 supports only 1 single reading device + system accessories.

CBX500 INSTALLATION MANUAL

SUPPORTED READING DEVICE MODELS

HARDWARE AND SOFTWARE COMPATIBILITY

The CBX500 can be directly connected to all of the following readers through the 25-pin

connector illustrated in Figure A.

Linear Scanners

2D Readers

DS2100N NSC

DS2400N NSC

DS4800

Matrix 210™

Matrix 300™

DS6300

DS6400

DX6400

Matrix 410™

Matrix 450™

DS8100A

DX8200A

NOTE: Not all readers support all CBX accessories. Compatibility

between the accessories and your reader depends on the reading device

application software. See the "Accessories" paragraph in your reading

device Reference Manual for the list of supported CBX Series accessories.

NOTE: CBX500 is backward compatible with DS2100N/DS2400N (black

body) model reading devices using the ADP-MM1 25-pin gender changer.

See the Gender Changer documentation for the relative CBX pinout. A

scanner software upgrade may be required to manage CBX500 accessories.

HARDWARE COMPATIBILITY ONLY (PASSIVE CONNECTIONS)

NOTE: CBX500 is backward compatible with DS4600A, and

DS1100/DS2200 10-30 Vdc model reading devices using the ADP-MM1 25-

pin gender changer. See the Gender Changer documentation for the relative

CBX500 pinout. CBX500 accessory management through device application

software is not provided for these products.

CBX500 INSTALLATION MANUAL

OPENING THE CBX500

To install the CBX500 or during normal maintenance, it is necessary to open it by unscrewing

the four cover screws:

CAUTION: The CBX500 must be disconnected from the power supply

during this operation.

MECHANICAL INSTALLATION

CBX500 can be mounted to various wooden or plastic surfaces using the two self-threading

screws (3.9 x 45 mm) and washers provided in the package.

Mounting to other surfaces such as concrete walls or metallic panels requires user-supplied

parts (screws, screw anchors, nuts, etc). A mounting template is included in the package to

facilitate hole drilling alignment.

CBX500 can also be mounted to a DIN rail using the BA100 (93ACC1821) mounting

accessory or to a Bosch Frame or 80/20 Frame using the BA200 (93ACC1822) mounting

accessory.

The diagram below gives the overall dimensions of the CBX500 and shows the two mounting

through-holes.

Figure 1 - Overall Dimensions

178

[7.01]

82.9

[3.26]

80.9

[3.18] 4

[0.16]

[2.8]

180

[7.1]

193

[7.6]

30.7

[1.21]

Mounting

Holes

CBX500 INSTALLATION MANUAL

ELECTRICAL CONNECTIONS AND SETUP

The following figure shows the typical layout.

Figure 2 –System Layout

The dotted line in the figure refers to an optional (temporary) hardware configuration in which

a portable PC can be quickly connected to the CBX500 (and consequently to the reading

device auxiliary interface) through the internal 9-pin connector. This allows monitoring of the

data transmitted by the reading device or configuration through the utility program (see the

reading device Installation Manual for more details). The reading device auxiliary interface

signals are also available on the internal spring clamp connectors.

After making system cabling and switch settings, connect the reading device to the 25-pin

connector on the CBX500 housing.

Switch ON the CBX500 power switch (see Figure 3). The Power LED turns on (blue) when

the power connection has the correct polarity. The Power LED turns on (red) in case of

wrong polarity.

After system functioning has been verified, close the CBX500 using the four cover screws.

Reading Device

Configuration PC

PWR

Scanner

CBX500

Scanner

Auxiliary

Interface

PS, I/O, Main Interface

CBX500 INSTALLATION MANUAL

POWER SUPPLY

Power is supplied to the CBX500 through the Vdc and GND pins provided on the spring

clamp connector.

The power switch (see Figure 3) switches the power supply ON or OFF for both the CBX500

and the connected reading device.

CAUTION: The power switch does not control power to the Vdc/GND, +V/-V

spring clamps, therefore any devices connected to these signals (i.e. external

trigger, encoder, etc.), are live and are not protected from polarity inversion.

Disconnect the power supply when working inside the CBX500.

OFF

Figure 3 - Power Switch ON/OFF Positions

CBX500

POWER SUPPLY

GND

Vdc

V+ (10 - 30 Vdc)

Earth

Earth Ground

Figure 4 - Power Supply Connections

NOTE: Vdc is electrically connected to +V, just as GND is electrically

connected to -V. This is useful for supplying external trigger, inputs and

outputs from the CBX500 power source, however +V and -V signals should

not be used as power supply inputs to the CBX500.

The power supply must be between 10 and 30 Vdc only.

CBX500 INSTALLATION MANUAL

SYSTEM WIRING

The connection and wiring procedure for CBX500 is described as follows:

1) Open the CBX500 by unscrewing the four cover screws.

2) Verify that the CBX500 power switch is off (see Figure 3).

3) Unscrew the compression connectors and pass all the system cables through them into

the CBX500 housing.

4) To connect the power and input/output signals:

Prepare the individual wires of the system cables by stripping the insulation back

approximately 1 cm.

Using a device such as a screwdriver, push down on the lever directly next to the

clamp (see Figure 5).

Insert the wire into the clamp and release the lever.

The wire will now be held in the spring clamp.

5) Tighten the compression connector nuts so that the internal glands seal around the

cables.

Figure 5 - System Cable Connections

Flexible stranded wire should be used and must meet the following specifications.

All positions: 24 - 16 AWG 0.2 - 1.5 mm²

The CBX500 spring clamp connector pinouts are indicated in the Pinout table.

Refer to the reading device Installation Manual for signal details.

CBX500 INSTALLATION MANUAL

PINOUT

Pinouts

Group

Name

Function

Input Power

Vdc

Power Supply Input Voltage +

GND

Power Supply Input Voltage -

Earth

Protection Earth Ground

External

Trigger Input

Power Source –External Trigger

I1A

External Trigger A (polarity insensitive)

I1B

External Trigger B (polarity insensitive)

-V

Power Reference –External Trigger

Generic Input

Power Source –Inputs

I2A

Input 2A (polarity insensitive)

I2B

Input 2B (polarity insensitive)

-V

Power Reference –Inputs

Outputs

Power Source –Outputs

-V

Power Reference –Outputs

O1+

Output 1+

O1-

Output 1-

O2+

Output 2+

O2-

Output 2-

Other I/O

O3A

Output 3A (polarity insensitive)

O3B

Output 3B (polarity insensitive)

Power Source –Other I/O

I3A

Input 3A (polarity insensitive)

I4A

Input 4A (polarity insensitive)

-V

Power Reference –Other I/O

I34B

Input 3B and 4B (common) (polarity insensitive)

I34B

Input 3B and 4B (common) (polarity insensitive)

Auxiliary

Interface

Auxiliary Interface TX

Auxiliary Interface RX

SGND

Auxiliary Interface Reference

ID-NET™

REF

Network Reference

ID+

ID-NET™ network +

ID-

ID-NET™ network -

Network

Shield

Network Cable Shield

RS232

RS485FD

RS485HD

Main

Interface

TX+

RTX+

RTS

TX-

RTX-

*RX+

CTS

*RX-

SGND

The input power signals Vdc, GND and Earth as well as the network signals REF, ID+, ID-

and Shield; and RTX+, RTX- and SGND are repeated to facilitate system cabling. In this way

the power and network busses can enter and exit the CBX500 from different spring clamps

but be physically connected together.

*Do not leave floating, see Reading Device Reference Manual for connection details.

Altri manuali per CBX500

Indice

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic Heron D130 Manuale utente

Datalogic

Datalogic Gryphon GD4200 Manuale utente

Datalogic

Datalogic DS6400 Manuale utente

Datalogic

Datalogic Magellan 1100i Manuale utente

Datalogic

Datalogic Cobalto CO5330 Manuale di installazione e funzionamento

Datalogic

Datalogic Lynx D Manuale utente

Datalogic

Datalogic Gryphon I GM4100 guide Manuale utente

Datalogic

Datalogic PowerScan M8500 Manuale di installazione e funzionamento

Datalogic

Datalogic PowerScan PM9100 Series Manuale utente

Datalogic

Datalogic Gryphon GFS4 series Manuale utente

Datalogic

Datalogic MAGELLAN 1400I Manuale utente

Datalogic

Datalogic TC1100 Manuale utente

Datalogic

Datalogic GRYPHON D Series Manuale utente

Datalogic

Datalogic DS8100A-3002 Manuale utente

Datalogic

Datalogic GRYPHON Manuale utente

Datalogic

Datalogic Gryphon GFS41XX Manuale utente

Datalogic

Datalogic PowerScan PD9530 Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon GD4500 Manuale utente

Datalogic

Datalogic Magellan 2200VS Manuale utente

Datalogic

Datalogic GRYPHON M SERIES Manuale utente

Datalogic

Datalogic PowerScan D8340 Manuale utente

Datalogic

Datalogic Gryphon I GD441 Series Manuale utente

Datalogic

Datalogic QuickScan QM2400 Manuale utente

Datalogic

Datalogic GRYPHON Mx30 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente