More printing courses please find below.
6
If you can’t wait to print your first 3d-printed
item, you could click at “One Click printing
button” and print the model saved at the SD
card, get in printing mode efficiently.
5
0706
Print Preparation
Connect power，switch on the printer.
1Connect the printer to computer with USB
wire, and run MoiraSoft. Make sure the Status
Bar at the bottom of the home page display
“Connected”.
2
3Open the “Setting” menu of MoiraSoft, and select “Change Materials”.
Push the “Feed” button, and wait for the completion of feeding.
Please use default parameter for auto-leveling, the parameter is the space between printing
platform and 3d model base, if model is hard to remove, then increase the parameter, if model is too
loose, then decrease the parameter, suggesting the range between +/- 2mm.
While machine is produced at the factory, the auto-leveling has been done, the default parameter is
marked at platform sticker.
4
