Denon DN-200BRX Manuale utente
2
3
User Guide (English)
Introduction
DN-200BR is a Bluetooth®audio receiver with professional-grade audio
outputs. It lets you add wireless stereo Bluetooth audio reception to any
professional audio system. Once you pair your Bluetooth device to DN-200BR,
you can send your device’s audio signal out DN-200BR’s balanced XLR or
unbalanced 1/4” (6.35 mm) outputs to your mixer, loudspeakers, or
amplification system.
Please see this guide’s Setup chapter to learn how to integrate DN-200BR with
your audio system, and then refer to the Operation chapter to start using DN-
200BR.
Box Contents
DN-200BR
Removable Bluetooth Antenna
2-Pin Euroblock Connector
Power Adapter
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility
information, etc.) and product registration, visit denonpro.com.
4
Features
OUTPUT
UNBAL.UNBAL.
BAL.
1
2
34
5
6
77
88
1. Power Input: Use the included power adapter to connect this input to
a power outlet. See Setup for more information.
2. BNC Antenna Terminal: Connect the included removable Bluetooth
antenna to this BNC connector. The antenna receives and transmits
the Bluetooth signal from a paired Bluetooth device. DN-200BR has a
range of up to 82 feet (25 meters).
3. Pair Button: Press and hold this button for 3seconds to make DN-
200BR available for pairing to a nearby Bluetooth device. See
Operation for more information.
4. Remote Pairing Connector: Use the included 2-pin Euroblock
connector to add a remote pairing button (not included) to this
connector.
1.8”
(45mm)
5.8”
(149mm)
5
5. Status Light: This LED indicates the DN-200BR’s Bluetooth pairing
status:
•Flashing slowly (approximately twice every 2 seconds):DN-
200BR is not paired to a Bluetooth device.
•Flashing quickly (approximately twice per second):DN-200BR
can be paired to a Bluetooth device.
•Solidly lit: DN-200BR is paired to a Bluetooth device.
See Operation to learn how to pair/unpair a Bluetooth device to/from
DN-200BR.
6. Level Knob: Turn this knob to adjust the output volume level (sent to
the balanced and unbalanced outputs).
7. Outputs (Balanced XLR):These outputs send the audio from a paired
Bluetooth device. Use XLR cables to connect these outputs to your
loudspeakers, mixer, etc. See Setup for more information.
8. Outputs (Unbalanced 1/4” /6.35mm):These outputs send the audio
from a paired Bluetooth device. Use standard 1/4” (6.35mm) cables to
connect these outputs to loudspeakers, mixer, etc. See Setup for
more information.
6
Setup
Items not listed under Introduction > Box Contents are sold separately.
1. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN-
200BR’s outputs (balanced or unbalanced) to your loudspeakers,
mixer, amplifier, or other device that accepts line-level inputs (this
device must be powered off).
Important: For stereo operation, make sure all left (L) and right (R)
outputs are connected to left and right inputs, respectively.
2. Use the included power adapter to connect DN-200BR’s power
input to your power source.
Important: Do not use DN-200BR near a microwave oven, which can
interfere with the reception.
3. If you are using a mixer, make sure all of its connections are secure,
and power it on.
4. Power on your loudspeakers last.
7
Example
OUTPUT
UNBAL.UNBAL.
BAL.
Mixer
PA loudspeakers Loudspeakers
Power
Smartphone,
tablet, etc.
8
Operation
You can play audio from an audio device that sends its signal over a
Bluetooth connection (e.g., smartphones, tablet computers, etc.). DN-
200BR uses Bluetooth CSR 4.0 and has a range of up to 82 feet (25
meters).
Once you “pair” your Bluetooth device with DN-200BR, they are
“connected” wirelessly. You can play audio on your Bluetooth device, and
it will be sent out of DN-200BR’s outputs (balanced and unbalanced).
Important:
•DN-200BR will not receive audio from a phone call. While using it, we
recommend disabling your cellular connection, if possible.
•Do not use DN-200BR near a microwave oven, which can interfere
with the reception.
•While DN-200BR is paired with a Bluetooth device, other Bluetooth
devices cannot pair to it. You must unpair (“disconnect”) the current
Bluetooth device from DN-200BR to make it available to others.
9
To pair your Bluetooth device to DN-200BR:
1. If DN-200BR is off, use the included power adapter to connect its
power input to your power source. The Status Light will flash slowly.
2. Make sure your desired Bluetooth device has its Bluetooth
connectivity on and is within range. DN-200BR will automatically try to
pair with the last-paired Bluetooth device, if any.
If you are using that Bluetooth device again, you can start playing
audio immediately.
If you want to use a different Bluetooth device, continue to Step 3.
3. Press and hold DN-200BR’s Pair button for 3seconds. When the
Status Light starts flashing quickly, release the Pair button.
4. On your Bluetooth device, enter its Bluetooth settings menu, and
select DN-200BR.
Note: (Some older Bluetooth devices may require you to enter a PIN. If
this is the case, enter 0000 as the PIN.)
10
5. On your Bluetooth device, start playing audio.
To adjust your volume level, we recommend setting the volume control
of each of your devices in the following order:
i. your Bluetooth device
ii. DN-200BR, using its Level Knob
iii. your mixer, if any (its input channel level[s], then its main
output level)
iv. your loudspeakers
Set each volume level as high as possible without creating distortion
or any “clipping” of the sound.
Important: DN-200BR will not receive audio from a phone call. While
using it, we recommend disabling your cellular connection, if possible.
To unpair your Bluetooth device from DN-200BR, do one of the following:
•Enter your Bluetooth device’s Bluetooth settings menu, and
disconnect from DN-200BR.
•Press and hold DN-200BR’s Pair button for 3seconds, and then
release it. DN-200BR will unpair from your Bluetooth device and be
available to pair to another one.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Denon Ricevitore
Denon
Denon AVR-1804 Manuale utente
Denon
Denon AVR-E300 Manuale utente
Denon
Denon AVR-X3200W Manuale utente
Denon
Denon In-Command AVR-2313CI Manuale utente
Denon
Denon ADV-M71 Manuale utente
Denon
Denon AVR 888 - AV Receiver Manuale utente
Denon
Denon AVR-1602 Manuale utente
Denon
Denon AV SURROUND RECEIVER AVR-891 Manuale utente
Denon
Denon AVR-X4100W Manuale utente
Denon
Denon AVR-2307CI Manuale utente
Denon
Denon AVR-5805CI AV Manuale utente
Denon
Denon AVR-X2000 Manuale utente
Denon
Denon AVR-1507 Guida utente
Denon
Denon AVR-S500BT Manuale utente
Denon
Denon AVR-1610 Manuale utente
Denon
Denon AVR-X3000 Manuale utente
Denon
Denon AVR-5805 Manuale utente
Denon
Denon AVR-1802 Manuale utente
Denon
Denon AVR-5805 Manuale utente
Denon
Denon AVR-1508 Manuale utente
