Dexter Laundry N-Series Manuale utente

USE THE BLUE TABS LOCATED ON THE

RIGHT AND LEFT SIDES OF THE FOLLOWING

DOCUMENT TO ADVANCE TO EACH SECTION.

8533-034-003 5/22

N-Series Vended & OPL Washers

WCN_ _

WCN18AA

WCN18AB

WCN18AADX

WCN18ABDX

Non-Express

8533-034-003 5/22

Indicates an imminently hazardous situation, which if

not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation, which if not

avoided could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may

also be used to alert against unsafe practices. Minor

burns, pinch points that result in bruises and minor

chemical irritation.

Indicates information or a company policy that relates

directly or indirectly to the safety of personnel or protec-

tion of property.

This is the user caution symbol. It indicates a condition

where damage to the equipment resulting in injury to

the operator could occur if operational procedures are

not followed. TO REDUCE THE RISK OF DAMAGE OR

INJURY, refer to accompanying documents; follow all

steps or procedures as instructed.

This is the electrical hazard symbol. It indicates that

there are DANGEROUS HIGH VOLTAGES PRESENT inside

the enclosure of this product. TO REDUCE THE RISK OF

FIRE OR ELECTRIC SHOCK, do not attempt to open the

enclosure or gain access to areas where you are not

instructed to do so. REFER SERVICING TO QUALIFIED

SERVICE PERSONEL ONLY

Caution! There are sharp edges on various sheet metal

parts internal to the enclosure. Use safety consciousness

when placing or moving your hands while working in the

interior of this equipment.

Caution! To reduce the risk of damage to the Water Inlet

Valve, do not supply inlet water with a temperature that

exceeds 70˚ C.

Caution! To reduce the risk of re or explosion, do not

operate this equipment in any hazardous classied

(ATEX) environment.

Equipment Safety Warnings

Symbols and Terminology Used in this Equipment

Part # 8533-034-003 5/22

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

Warning! Do not operate equipment if door glass is

damaged in any way.

Warning! Keep clear of rotating parts.

Prohibited! Do not enter this equipment or space.

Prohibited! Do not step or stand on this equipment.

Prohibited! Do not operate without all guards and covers in

place.

Prohibited! Do not operate without all guards and covers in

place.

Prohibited! Do not wash clothing impregnated with

ammable liquids (petrochemical).

Prohibited! Do not allow children to play in or around

equipment.

Equipment Safety Warnings

Symbols and Terminology Used in this Equipment Indicates an imminently hazardous situation,

which if not avoided, will result in death or seri-

ous injury.

Indicates a potentially hazardous situation,

which if not avoided could result in death or

serious injury.

Indicates a potentially hazardous situation

which, if not avoided, may result in minor or

moderate injury. It may also be used to alert

against unsafe practices. Minor burns, pinch

points that result in bruises and minor chemical

irritation.

Indicates information or a company policy that

relates directly or indirectly to the safety of per-

sonnel or protection of property.

This is the user caution symbol. It indicates a

condition where damage to the equipment re-

sulting in injury to the operator could occur if

operational procedures are not followed.

TO REDUCE THE RISK OF DAMAGE OR INJURY,

refer to accompanying documents; follow all

steps or procedures as instructed.

This is the electrical hazard symbol. It indicates

that there are DANGEROUS HIGH VOLTAGES

PRESENT inside the enclosure of this product.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, do not attempt to open the enclosure or

gain access to areas where you are not instruct-

ed to do so. REFER SERVICING TO QUALIFIED

SERVICE PERSONEL ONLY

Caution! To reduce the risk of re or explosion,

do not operate this equipment in any hazardous

classied (ATEX) environment.

4 5

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

• All washers must be installed in accordance to

all applicable electrical, plumbing and all other local

codes.

• These installation and operation instructions are

for use by qualied personnel only. To avoid injury

and electrical shock, do not perform any servicing

other than that contained in the installation and op-

eration instructions, unless qualied.

Do not install washers in an explosive atmosphere.

•Care must be stressed with all foundation work to

ensure a stable unit installation, eliminating pos-

sibilities of excessive vibration.

•Foundation must be level within 13 mm to ensure

proper washer operation.

Do not operate washer if door glass is damaged in

any way.

Do not wash clothing impregnated with ammable

liquids (petrochemical).

WARNING

Children should be supervised to

ensure they do not operate or play

in or around equipment.

Keep all panels in place to protect against electrical

shock and injury and add rigidity to washer.

WARNING

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

A washer should not be allowed to operate if any of the following occur:

• Excessive high water level.

• Machine is not connected to a properly earthed circuit.

• Door does not remain securely locked during the entire cycle.

• Vibration or shaking from an inadequate mounting or foundation

6 7

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

Warning! Do not operate equipment if door glass is

damaged in any way.

Warning! Keep clear of rotating parts.

Prohibited! Do not enter this equipment or space.

Prohibited! Do not step or stand on this equip-

ment.

Prohibited! Do not operate without all guards and

covers in place.

Prohibited! Do not operate without all guards and

covers in place.

Prohibited! Do not wash clothing impregnated

with ammable liquids (petrochemical).

Prohibited! Do not allow children to play in or

around equipment.

Prohibited! Do not attempt to open, touch, or pro-

ceed before referring to the manual or unless quali-

ed.

Mandatory! Read all supporting documentation be-

fore operating or maintaining equipment.

Mandatory! Disconnect power before servicing

equipment.

Mandatory! Lock out and tag out before servicing

this equipment.

Mandatory! Disconnect water supply before servic-

ing equipment.

Mandatory! Children should be supervised to ensure

they do not operate equipment.

8 9

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

A machine should not be allowed to

operated if any of the following occur:

• Excessively high water level.

• Machine is not connected to a properly grounded

circuit.

• Loading door does not remain securely locked

during the entire cycle.

• Vibration or shaking from an inadequate mounting

or foundation.

Table of Contents

Section 1: Machine Mounting &

Installation......................................Pg 14

Section 2: Machine Installation &

Operating Instructions............Pg 23

Section 3: Electrical Wiring.....Pg 31

Section 4: Machine Service

Procedures...............................Pg 40

Section 5: Troubleshooting......Pg 56

Section 6: Parts Data..............Pg 64

Section 7: Coin Handling.......Pg 103

Section 8: Maintenance........Pg 106

Dexter Safety

Guidelines

FOR SAFETY

1. Always shut o power and water

supply and also discharge capacitors

before servicing.

2. Do not overload the washer.

3. Do not attempt to open door if cylinder

is in motion or contains water.

4. Do not mechanically force or override

door lock in any way.

5. Do not bypass any safety devices of

this washer.

6. Do not use volatile or ammable

substances in or near this washer.

7. Keep all panels in place. They protect

against shock and injury and add

rigidity to the washer.

To activate your warranty, be sure to return

your red warranty form to the factory. Please

have serial number and model ready when

calling for assistance.

WARNING

These washers are equipped with devices and

features relating to their safe operation. To

avoid injury or electrical shock, do not perform

and service, unless qualied to do so.

10 11

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Notes

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

12 13

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Notes Notes

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

Specications for below models

are outlined in this book:

WCN18AA 120 volts 60Hz Single Phase

WCN18AB 208-240 volts 60Hz Three Phase

Cycle

Times

Prewash & 3

Rinses

Prewash & 2

Rinses

No Prewash &

3 Rinses

No Prewash &

2 Rinses

Preswash 4 minutes 4 minutes Not Used Not Used

Drain 40 seconds 40 seconds Not Used Not Used

Wash 8 minutes 8 minutes 8 minutes 8 minutes

Drain 40 seconds 40 seconds 40 seconds 40 seconds

Rinse 1 3 min. 45 sec. Not Used 3 min. 45 sec. Not Used

Drain 40 seconds Not Used 40 seconds Not Used

Rinse 2 3 min. 45 sec. 3 min. 45 sec. 3 min. 45 sec. 3 min. 45 sec.

Drain 40 seconds 40 seconds 40 seconds 40 seconds

Int. Spin 50 seconds 50 seconds 50 seconds 50 seconds

Rinse 3 3 min. 45 sec. 3 min. 45 sec. 3 min. 45 sec. 3 min. 45 sec.

Drain 40 seconds 40 seconds 40 seconds 40 seconds

Extract 4 minutes 4 minutes 4 miinutes 4 minutes

Tumble 16 seconds 16 seconds 16 seconds 16 seconds

Tot al* 32 minutes 27.5 minutes 27 minutes 23 minutes

*Cycle times are approximate.

Water Usage

(T-300)

Wash & 2

Rinses

Prewash & 2

Rinses

Wash & 3

Rinses

Prewash & 3

Rinses

Preswash Not Used 12 gallons Not Used 12 gallons

Wash 13.75 gallons 9.25 gallons 13.75 gallons 9.25 gallons

Rinse 1 Not Used Not Used 8.35 gallons 8.35 gallons

Rinse 2 8.2 gallons 8.2 gallons 8.2 gallons 8.2 gallons

Int. Spin

Rinse 3 11.5 gallons 11.5 gallons 11.5 gallons 11.5 gallons

Tot al 33.45 gallons 40.95 gallons 41.8 gallons 49.3 gallons

Water Temp Heavy Duty Normal Perm Press Delicates

Preswash Hot Warm Warm Cold

Wash Hot Warm Warm Cold

Rinse 1 Cold Cold Cold Cold

Rinse 2 Cold Cold Cold Cold

Rinse 3 Cold Cold Cold Cold

*Rinses can be converted to warm by moving the Brown/Orange wire

on TB-11 to TB-9 (TB-# relates to a terminal number on the large ter-

minal block located in the electrical control trough). Disconnect electri-

cal power before moving wire.

Part # 8533-034-003 5/22

Section 1:

Machine

Mounting

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

Specications

T-400 Coin Washer

Capacity 18lbs.

Dimensions

Cylinder Depth 13 1/2"

Cylinder Diameter 21"

Cylinder Volume (cubic feet) 2.7

Door Opening 12 1/4"

Door Height (oor to bottom of

door)

14 3/4”

Overall Height 14 3/4"

Cabinet Width 43 7/8"

Overall Depth 26"

Drain Diameter (O.D.) 24 13/16"

Drain Height (oor to center of

outlet)

2 1/4"

Recommended Clearance Be-

tween Machines (min)

1/2”

Necessary Service Clearance

Behind Machine

Cylinder RPM

Tumble Speed 55

Extract Speed 560

Extract Speed G-Force 94

Cylinder Direction in Extract clockwise

Motor H.P.

Wash Single Phase 0.18

Wash Three Phase 0.18

Extract Single Phase 0.6

Extract Three Phase 0.6

Amperage (avg. measured on L1)

Wash Single Phase 5.75

Wash Three Phase 2.25

Extract Single Phase 7

Extract Three Phase 1.25

Running Amps (Maximum)

Single Phase 13

Three Phase 3.5

Circuit Breaker (Amps)

Single Phase 20

Three Phase 15

Built-in Controls Circuit Breaker Yes

Built in Motor Protection Yes

Voltage 60Hz.

Single Phase 120

Three Phase 208-240

Service

Single Phase cord provided

Three Phase 3 wires + ground

Wire Size (Minimum)

Single Phase 12

Three Phase cord provided

Water

Avg. Water Usage

Normal Cycle with Full

Load

34 gallons

Max Hot Water Usage

Hot Cycle with Full Load

10.5 gallons

Recommended Hot Water

(degrees)

140

Water Pressure (min/max) 30-120psi

Water Inlet Size (hose

thread)

3/4”

Water Flow Rate (gallons/

minute)

Wash Cycle

Normal Wash-Including Fill

Time

24 min 20 sec

Wash Temperatures Hot, Warm, &

Cold

Rinse Temperatures Cold-Std;

Warm-Opt

Mounting Hole Dimensions

Left to Right 23 1/4”

Front to Cabinet to First

Hole

2 1/2”

First Hole to Second Hole 16 3/4”

Second Hole to Third Hole N/A

Mounting Bolt Diameter 1/2”

Hole Diameter in Base 9/16”

Concrete Thickness (min) 6”

Recommended Mounting

Height

8”

Weight

Shipping (lbs.) 361/1p 351/3p

Net (lbs.) 333/1p 323/3p

16 17

Part # 8533-034-003 5/22 Part # 8533-034-003 5/22

Machine

Mounting

Installation

& Operation

Trouble-

shooting

Machine

Service

Electrical

Wiring

Parts

Data

Coin

Handling

Maintenance

18 Part # 8533-034-003 5/22 19

Part # 8533-034-003 5/22

Notes

Section 2:

Machine

Installation

& Operating

Instructions

Altri manuali per N-Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dexter Laundry Rondella

Dexter Laundry

Dexter Laundry T-300 VENDED Manuale

Dexter Laundry

Dexter Laundry WC 00XA-12EC X Series Manuale utente

Dexter Laundry

Dexter Laundry WC0300XA-10EC4X Manuale utente

Dexter Laundry

Dexter Laundry WCAD Series Guida rapida

Dexter Laundry

Dexter Laundry O Series Guida rapida

Dexter Laundry

Dexter Laundry T-350SWD Manuale utente

Dexter Laundry

Dexter Laundry T1200 Istruzioni per l'installazione

Dexter Laundry

Dexter Laundry WCVD-WN Series Manuale utente

Dexter Laundry

Dexter Laundry T-650 Guida rapida

Dexter Laundry

Dexter Laundry WCVD-WN Series Guida rapida

Dexter Laundry

Dexter Laundry WCVD Series Guida per l'amministratore

Dexter Laundry

Dexter Laundry OPL Series Guida rapida

Dexter Laundry

Dexter Laundry T-300 VENDED Manuale utente

Dexter Laundry

Dexter Laundry WN0675 Guida rapida

Dexter Laundry

Dexter Laundry T450 Express Manuale utente

Dexter Laundry

Dexter Laundry T-300 VENDED Guida rapida

Dexter Laundry

Dexter Laundry T-450SWD Manuale utente

Dexter Laundry

Dexter Laundry T-1800 Manuale utente

Dexter Laundry

Dexter Laundry WCAD Series Manuale di installazione

Dexter Laundry

Dexter Laundry WCVD Series Guida rapida

Dexter Laundry

Dexter Laundry T-1450 Manuale di installazione

Dexter Laundry

Dexter Laundry O Series Guida rapida

Dexter Laundry

Dexter Laundry T-900 Manuale utente

Dexter Laundry

Dexter Laundry 400 EXPRESS Manuale utente

Manuali Rondella popolari di altre marche

Tricity Bendix

Tricity Bendix AW 1000 W Guida del prodotto

Panasonic

Panasonic NA-F60L5WRB Manuale utente

GE WSLP1500 Manuale

Electrolux

Electrolux EWF1284EDW Manuale utente

Bosch

Bosch WAN2829BSN Manuale utente

LG TV2516DV3B Manuale utente

LG TH2517DSAV Manuale utente

VESTEL

VESTEL CMH-XL 7510 TE Manuale utente

AEG

AEG 74335 Manuale operativo

Johnson

Johnson JWF721A Manuale utente

Beko

Beko WTE7604XLW0 Manuale utente

Danby

Danby DTT100A1WDB Istruzioni per il montaggio

Amica

Amica WA 14 Ex Manuale utente

Daewoo

Daewoo DWD-F1222 Manuale utente

Bosch

Bosch WAS28461AU Manuale utente

Miele

Miele PW 6080 Vario Manuale utente

Finlux

Finlux FLX108CF220 Manuale utente

Whirlpool

Whirlpool 3LBR5132AN0 Manuale utente