DHM PRO VORON 2.4 KIT 9 Manuale utente
VORON 2.4
KIT 9
∙PANELLING
∙HEPA FILTER
WWW.VORONDESIGN.COM
INTRODUCTION
Before you begin on your journey, a word of caution.
In the comfort of your own home you are about to assemble a robot. This
machine can maim, burn, and electrocute you if you are not careful. Please
do not become the rst VORON fatality. There is no special Reddit air for that.
Please, read the entire manual before you start assembly. As you begin wrenching,
please check our Discord channels for any tips and questions that may halt your progress.
Most of all, good luck!
THE VORON TEAM
WWW.VORONDESIGN.COM
Heat Set Insert
PREPARATION
01
WWW.VORONDESIGN.COM
M3x8 SHCS M3x8 SHCS
M3x8 SHCS
SKIRTS
OPTION: KEYSTONE INSERTS
The picture is showing blanks
for the keystone slots.
Alternatively you can add
modules for USB or ethernet
and expose ports of the
Raspberry PI on the back of the
printer.
02
WWW.VORONDESIGN.COM
M3 T-Nut
M3 T-Nut
SKIRTS
03
WWW.VORONDESIGN.COM
M3x8 SHCS
SKIRTS
04
WWW.VORONDESIGN.COM
M3x8 SHCS
M3 T-Nut
SKIRTS
05
WWW.VORONDESIGN.COM
M3x8 SHCS
SKIRTS
06
WWW.VORONDESIGN.COM
M3 T-Nut
M3 T-Nut
M5 T-Nut
SKIRTS
07
WWW.VORONDESIGN.COM
M3x8 SHCS
SKIRTS
08
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali DHM PRO Stampante 3D
