digicon catrax automatic clip Manuale utente
Product manual
Copyright– Digicon S.A.
Electronic Control for Mechanics – 2014
All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, translated into any language or computer
language in any electronic, magnetic, optical, chemical, manual way, or otherwise,
without the express written permission from Digicon S.A.
Manual code: 069.31.200
English - Revision: 02
This manual was elaborated by: Digicon S.A. Electronic Control for Mechanics
Documentation Sector - EDS
Contents
1. Important instructions ..........................................................................05
2. Orientations ........................................................................................06
3 .........................................................................................06. Introduction
4 ...........................................................07. Features of Catrax Automatic Clip
4.1 Catrax automatic Clip Operation ..........................................................08
5. Installation/Assembly ...........................................................................09
5.1 Unboxing ..........................................................................................09
5.2 Floor drilling and column fixation ..........................................................10
5.3 Assembly the arms ............................................................................11
5.4 Access to Catrax Automatic Clip after assembly ......................................12
5.5 Connetion to power network ................................................................13
6. Installation/Assembly optional items ......................................................14
6.1 Collecting box kit ...............................................................................14
6.1.1 Connecting collector kit to control board .............................................15
6.2 Operational pictogram kit ....................................................................16
6.3 Power suply ......................................................................................17
6.4 Electromechanical counter kit ..............................................................17
6.5 Control board ....................................................................................18
6.5.1 Inputs ...........................................................................................20
6.5.1.1 Return signals ..............................................................................21
6.5.1.2 Electromagnets ............................................................................21
6.5.1.3 Sound alarm ................................................................................21
6.5.1.4 Connection scheme ......................................................................22
6.5.1.5 Pictogram ....................................................................................23
6.5.2 Outputs .........................................................................................23
6.5.3 Configuration of control board ...........................................................23
6.5.4 Turnstile Interface ...........................................................................25
7. Maintenance .......................................................................................31
7.1 Preventive and corrective routine maintenance ......................................31
7.2 Solving problems ...............................................................................32
8. Technical characteristics .......................................................................33
9. Warranty and technical assistance .........................................................35
05
1. mportant nstructionsI i
You can see, below, the symbols that will appear in this manual,
signaling important moments. It is essential to pay attention to them.
TIP: Indicates something Digicon considers important.
CAUTION: Indicates a moment of extreme caution when
handling the equipment/product
ATTENTION: Indicates a moment when your observation
skills should be extremely productive.
INFORMATION: Presents interesting facts about the
purchased product.
QR CODE: Presents additional information or links
with more details about the presented text.
2. Orientations
Read the information and instructions of this manual carefully, before using the
product. This ensures the correct use of the equipment and maximum use of its
technical features as well as a prolonged service life.
This product does not present sealing against the rain, that is, it is designed to be
used indoors.
Keep this manual for future consultations.
Digicon reserves its right to alter its products at any moment to adapt them to more
recent technical advancements.
Digicon maintains its right to alter the information contained in this manual without
previous notice.
Digicon does not provide any contractual warranty concerning the information in this
manual, and cannot be held responsible for errors it may contain and problems due
to its use.
The information contained in this manual is exclusive property of Digicon and is
protected by copyright laws.
This manual cannot be reproduced, photocopied or translated, in its entirety or in
part, into any kind of medium, without Digicon's written consent.
3. Introduction
Following a new technological concept focused on solidity and reliability and counting
with innovative design elements, with color variety and widely curved lines, Digicon has
launched the line .CATRAX Automatic Clip
CATRAX Automatic Clip serves most technologies of access control currently
available, becoming the best option in the market for access control.
This manual presents a detailed description of the components and working of
CATRAX Automatic Clip. To see our complete catalogue, visit www.digicon.com.br.
06
4. Features of Catrax Automatic Clip
07
CATRAX Automatic Clip,an access controller in the model mini turnstile (column
type), destined to individuals with special needs, presents one arm with brushed
stainless steel (AISI 304) finishing and two-directional mechanism, with horizontal
movement. The column can present external finishing in brushed stainless steel (AISI
304) or 1020 carbon steel with electrostatic painting in black epoxy powder. It has
reinforced structure, fully rounded corners, and non-exposed screws, offering space
and comfort for any access control solution. It also has room for a collecting box
(optional item). Aiming at facilitating assembly and maintenance, the column
CATRAX presents a U-shaped internal support (mounting rack) withAutomatic Clip
standard holes for the fixation of additional electronic boards. Moreover, the clients,
according to their needs, can add additional holes. Access to the mounting rack is
done through a key with secret, and the removal and insertion are done through the
frontal door.
A plastic cover and a stainless steel sheet compose the upper panel. The cover, made
of injected plastic, can be purchased in stainless steel or black (other colors available
on demand). Optionally, the cover can present a slot for the reading of magnetic
cards/badges and barcodes. The upper cover in stainless steel allows easy
configuration and low-cost customization of the product. The sheet can also present
slots for optional items, such as pictogram, collecting box input, display kit, or a
combination of these items.
TIP: CATRAX AutomaticTo see details about the dimensions of
Clip's items, see item 8. Technical characteristics.
4.1 Catrax Automatic Clip operation
CATRAX Automatic Clip has a two-dimensional rotation system with two 24 V cd
electromagnets for activating the locks.
It includes a microprocessor control board where a signal enabling passage is sent
through one of the inputs, depending on the passage direction. If this signal is
recognized, the equipment will allow the movement of the arm of CATRAX Automatic
Clip. After half of the turning is complete (45 degrees), a 400 milliseconds returning
signal will be sent, informing the passage direction. After the signal, the arm cannot be
returned to the previous position.
Depending on the model and configuration, if the passage isCATRAX Automatic Clip
forced without the enabling signal, an electromagnet will be activated to prevent
passage. In addition, the equipment can emit a signal for a sound alarm and/or the
exhibition of a red sign on the upper panel display (models with pictogram). In this
case, a return signal will be sent, indicating that the turnstile was forced, informing the
direction of turn.
The image below shows how mechanism works:CATRAX Automatic Clip's
08
5. Installation/Assembly
5.1 Unboxing
As the items inside the package can vary (depending on the client's requests), it is
important to perform a cautious visual inspection before installing and assembling the
turnstile. A checklist that works as a guide during inspection accompanies all Digicon
packages.
See below the parts that can compose CATRAX Automatic Clip.
09
Arm
Front cover
Rear cover
Lock for accessing the column's interior
Pictogram
(optional)
Rotary axis
Lock for accessing
the mechanism
Cables passage
Column
5.2 Floor drilling and column fixation
Before installing , check:CATRAX Automatic Clip
1. The place chosen for the installation.
2. If there is a power source or electric socket nearby (ducts for connection).
3. If the place chosen is adequate for the installation of the access controller (indoors).
4. If there will be enough space (minimum 5 cm) between the rear of the CATRAX C
Automatic Clip lip column and the wall. This space is important in order to provide
access to the upper panel and plug's locks for the cables passage.
5. If there will be enough space for the arms after CATRAX Automatic Clip is assembled.
6. If the floor is in conditions to receive anchor bolts (minimum of 4 cm of FCK15 M.P.A.
concrete or equivalent).
ATTENTION: To see details on the dimensions of CATRAX Automatic Clip,
see item 8 (technical characteristics).
10
To fix the column to the floor, observe the following steps and the indicated images:
1. rill the floor with 3/8” drills (then use a 12mm or the ½” drill). Make four externalD
holes, according to the measures indicated in the image below:
2. Clean the holes, removing any debris from drilling.
3. Place the external part of the bolts in the holes. Leave about 25mm of the bolt out of
the hole.
4. Position the column and fasten it to the floor with the four screws that accompany
the bolts. Use a flex-head socket wrench with ¾'' or an articulated socket wrench.
12,5 (4x)
210
170
60
45
Saída de cabos
92,5
32
20
Fixing drilling
30
90
TIP: We recommend the bolts by the brand Tecnart, model AF38110, 3/8x4''.
Indice
Altri manuali digicon Controllori di accesso IP
