DIGITIZE RAD-800 Manuale utente

Digitize, Inc.

158 Edison Road

Lake Hopatcong, New Jersey 07849- 17

Tel: (973) 663-1011

Fax: (973) 663-4333 Part Number: 7001 9-0000

E-mail: info@digitize-inc.com Revision: B

Website: http://www.digitize-inc.com Issue Date: 1 /01

RAD-800 RADIO MASTER BOX

INTERFACE CONTROL UNIT

INSTRUCTION MANUAL

PARTS LIST

PROPRIETARY NOTICE

AND DISCLAIMER

DIGITIZE, INC.

158 EDISON ROAD

LAKE HOPATCONG, N 07849-2217

PH: (973) 663-1011

FAX: (973) 663-4333

E-Mail: info@digitize-inc.com

Website: http://www.digitize-inc.com

This manual has been prepared by DIGITIZE, INC. for use by its licensees, distributors and

customers. The information contained herein is the property of DIGITIZE, INC. and may not be

copied, disclosed or reproduced, in whole or in part, without the prior written approval of

DIGITIZE, INC. ny unauthorized disclosure to, or use of the enclosed information by,

unauthorized third persons shall void any and all representations, warranties and obligations on

the part of DIGITIZE, INC.

DIGITIZE, INC. reserves the right to make changes to the specifications and material

contained herein without prior notice. The information and/or examples (including, but not

limited to circuitry, wiring diagrams, programming, the operation or use shown) described in this

manual are intended solely to illustrate the operating principles of the particular product. They

are not a warranty, representation or guarantee that a particular example or use shown will

perform in a particular situation. They are given for illustration purposes only. DIGITIZE, INC.

shall not be responsible, nor does it represent, that any example of illustration will perform in a

particular environment or practice unless it specifically makes a representation to that effect.

The material set forth herein is for informational purposes only, and DIGITIZE, INC. assumes

no patent liability with respect to any information or illustrations contained herein.

TABLE OF CONTENTS

SPECIFICATIONS

POWER REQUIEMENTS......................................................................................................... i

CCESSORIES........................................................................................................................ i

FIG. 1-1 R D-800 R DIO M STER BOX INTERF CE CONTROL UNIT ............................ ii

FIG. 1-2 R D-810 ST NDBY POWER SYSTEM ................................................................... iii

SECTION I

GENER L INFORM TION ..................................................................................................... 1-1

1.1 PPLIC TION .................................................................................................................. 1-1

1.2 OPTION L CCESSORIES ............................................................................................ 1-1

FIG. 1-3 R D-800 R DIO M STER BOX INTERF CE, INTERIOR ..................................... 1-2

FIG. 1-4 R D-810 ST NDBY POWER SUPPLY, INTERIOR ................................................ 1-3

SECTION II

INST LL TION ....................................................................................................................... 2-1

2.1 MOUNTING ...................................................................................................................... 2-1

2.2 CONNECTIONS ............................................................................................................... 2-1

FIG. 2-1 R D-810 WIRING CONNECTIONS ........................................................................ 2-2

SECTION III

OPER TION ........................................................................................................................... 3-1

3.1 NORM L OPER TION ................................................................................................... 3-1

3.2 OPEN CIRCUITS ............................................................................................................. 3-1

FIG. 3-1 R D-800 SIMPLIFIED SCHEM TIC DI GR M ..................................................... 3-2

3.3 B TTERY CH RGE ........................................................................................................ 3-3

3.4 M STER BOX SWITCHES ............................................................................................. 3-3

FIG. 3-2 R D-800 PRINTED CIRCUIT BO RD & CONTROLS ........................................... 3-4

FIG. 3-3 R D-810 PRINTED CIRCUIT BO RD & CONTROLS ........................................... 3-5

TABLE OF CONTENTS (CONT.)

SECTION IV

M INTEN NCE ....................................................................................................................... 4-1

4.1 B TTERY .......................................................................................................................... 4-1

4.2 CH RGING PROCEDURE ............................................................................................... 4-1

4.3 PERIODIC HI-R TE CH RGE ......................................................................................... 4-2

4.4 DISCH RGE TEST ........................................................................................................... 4-2

4.5 DI GR MS ....................................................................................................................... 4-2

FIG. 4-1 R D-800 SCHEM TIC DI GR M ............................................................................ 4-3

FIG. 4-2 R D-800 WIRING DI GR M, FOUR CIRCUITS ..................................................... 4-4

FIG. 4-3 R D-810 SCHEM TIC DI GR M ............................................................................ 4-5

SECTION V

P RTS LIST ............................................................................................................................. 5-1

5.1 PURPOSE ......................................................................................................................... 5-1

5.2 HOW TO ORDER ............................................................................................................. 5-1

5.3 SP RE P RTS ................................................................................................................. 5-1

FIG. 5-1 R D-800 R DIO BOX INTERF CE ......................................................................... 5-2

T BLE 5-1 R D-800 R DIO BOX INTERF CE .................................................................... 5-3

FIG. 5-2 R D-800-10 PC BO RD SSEMBLY ...................................................................... 5-4

T BLE 5-2 R D-800-10 PC BO RD SSEMBLY ................................................................. 5-5

T BLE 5-2 R D-800-10 PC BO RD SSEMBLY ................................................................. 5-6

T BLE 5-3 R D-810 PC BO RD SSEMBLY ....................................................................... 5-6

SPECIFICATIONS

ENCLOSURE DIMENSIONS: 14-1/4" high X 14-1/4" wide X 4-1/4" deep.

POWER REQUIREMENTS:

Normal Operation: 2.0 amperes maximum at 120 V C, 60 Hz.

Trouble Condition: 10 milliamperes maximum at 24 VDC.

Power Failure Condition: 3 milliamperes maximum at 24 VDC for each actuating circuit.

Shunt Loop Connection: 46 milliamperes maximum at 24 VDC.

The R D-810 Standby Power System is required to operate the trouble-indicator circuit of the

Radio Master Box Interface Control Unit, and will provide up to 60 hours of standby power during

a primary power supply failure.

CATALOG NO. DESCRIPTION

R D-800 Radio Master Box Interface Control Unit (Four Zone)

R D-81 0 Standby Power System

ACCESSORIES

CATALOG DESCRIPTION

PME-29 0 - 50 Voltmeter

PME-30 0 - 100 Milliameter

P R-407 Common- larm ccessory Relay

PES-390 Retaining Clip for Relay

For additional information on other accessories available, refer to the R D-211 Manual

(700120), or contact your local distributor.

DIGITIZE, INC. 700129-0000 REV B 12/01 i

Specifications Subject to Change Without Notice

DIGITIZE, INC. 700129-0000 REV B 12/01 ii

Specifications Subject to Change Without Notice

FIG. 1

DIGITIZE, INC. 700129-0000 REV B 12/01 iii

Specifications Subject to Change Without Notice

FIG. 1-

INSTRUCTION MANUAL & PARTS LIST FOR THE

RAD-800 INTERFACE CONTROL UNIT

SECTION I

GENERAL INFORMATION

1.1 APPLICATION:

The R D-800 Radio Master Interface Control Unit (Fig. 1-1) provides a means of connecting any

fire alarm system to an DIGITIZE R D-211 (Radio Master Box) for automatic radio transmission of

alarms to the Communication Center. The R D-810 Standby Power System is shown in Fig. 1-2.

The unit is available with four separate supervised initiating circuits for remote tripping of a Radio

Master Box (R D-211). These initiating circuits operate from normally open contact alarm

initiating devices.

Each initiating circuit of the control unit is connected to an individual trip relay in the Radio Master

Box. Each trip relay is identified by a corresponding zone code that is transmitted to the

Communications Center Radio Receiver (*R D-6P/20P). The Radio Master Box trip relays may

be connected to the zone circuits of a single Interface Control Unit, or to the zone circuits of two or

more Interface Control Units.

n L RM indicator lamp, a TROUBLE indicator, and an audible device are mounted on the front

panel of the Interface Control Unit. Mounted inside the unit is a battery charger switch, a buzzer

control switch, and a master box disconnect switch for each of the four zones (Fig. 1-3).

The R D-810 Standby Power System (Fig. 1-4) is comprised of a voltage regulator and two 5

ampere/hour batteries. It is designed for use with the R D-800. The batteries are provided with

polarized connectors which plug into the quick connect terminals located at the bottom of the PC

Card. The battery, when maintained according to recommended procedure will provide a trouble

free source for powering the R D-800 during prolonged power outages. The battery is

conservatively rated for the application capacity to power a 3 ampere alarm signal for a minimum

of five minutes. The life of the battery is estimated at a minimum of three years.

1.2 OPTIONAL ACCESSORIES:

The following items are available as optional accessories:

1. 0 - 50 Voltmeter to indicate the power supply voltage (PME-29).

2. 0 - 100 Milliammeter to indicate the normal charging current being supplied to the standby

storage battery. When the B T switch is in the HI R TE position, the meter is shorted out to

protect it against high currents (PME-30).

common-alarm accessory relay to provide single pole, double throw common-alarm contacts,

rated for 2 amps max at 26 VDC and 1 amp max at 120 V C (P R-407).

• For information on the DIGITIZE, INC. R D-6P/20P Radio Receiver, see Information

Sheet PN: 750112 or contact your local distributor.

DIGITIZE, INC. 700129-0000 REV B 12/01 1-1

Specifications Subject to Change Without Notice

DIGITIZE, INC. 700129-0000 REV B 12/01 1-2

Specifications Subject to Change Without Notice

FIG. 1-3

DIGITIZE, INC. 700129-0000 REV B 12/01 1-3

Specifications Subject to Change Without Notice

FIG. 1-4

Indice

Altri manuali DIGITIZE Unità di controllo

DIGITIZE

DIGITIZE Q-MUX Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente