DIGMA FreeDrive 440 Manuale utente

USER MANUAL/ BEDIENUNGSANLEITUNG/ РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Dashcam/ Autokamera/ Видеорегистратор

FreeDrive 440

CONTENTS

Precautions

Specications

Component parts

Controls

Buttons and connectors

Video Recording Mode

Photo Mode

Playback Mode

Additional button functions

Troubleshooting

Thank you for purchasing a DIGMA product!

A dashcam is a device that records, stores, and plays video information.

Before using this device, please read through this manual to ensure the product is used correctly and

to prevent it from damage.

The soware, the device’s design features, and the content of this User Manual may change without

prior notice for product improvement reasons.

The manufacturer and distributors of this product shall not be responsible for any damage to the

device’s body or for any damage due to improper or inappropriate use by the user.

PRECAUTIONS

1. Install this device correctly. Do not install the product in a location where it can interfere with the

eld of vision of the driver or the system. This may cause the device to fail, or you may suer an injury.

2. Do not install the device near any magnetic eld sources that may damage the equipment.

3. Do not switch o the device while using or when formatting it. Do not insert or remove the TF card.

This may cause damage to the TF card or result in program malfunction.

4. The product’s TF card shall not be used for storing other les. Before using the product, please

format TF card in the device and make back up copies of video recordings and images.

5. To avoid electric shock, do not insert/pull out the cable with wet hands.

6. Do not use the product in temperatures above 60 °С or below 10 °С. Do not install the product in

environments with high humidity.

7. The charging device and accessories suitable for this device should be used.

8. Use TF cards up to 32 GB.

SPECIFICATIONS:

Screen: 2” TFT 320x240

Processor: NTK96658

Sensor: Sony IMX323 | 2 megapixels

Lens: wide-angle lens |140° viewing angle

Video format: MOV

Supported video resolution: FHD/1920х1080 (30 f/s), HD/1280х720 (60 f/s), HD/1280х720 (30 f/s),

WVGA/848х480 (30 f/s)

Video recording time: 3 min, 5 min, 10 min

Photo format: JPG

Supported photo resolution: 12M (4032 х 3024), 10M (3648 х 2736), 8M (3264 х 2448), 5M (2592 х

1944), 3M (2048 х 1536), 2MHD (1920 х 1080), 1.3M (1280 х 960), 0.3 (640 х 480)

G-sensor (automatic le locking when an accident occurs)

Memory Card: TF-card (supports up to 32 GB)

Parking Mode: supported

Microphone: in-built

Audio format: PCM

Languages: German/English/Russian

Battery: in-built Li-Pol, 300 mA·h

OS Compatibility: Windows 2000, XP, Vista, 7, 8, 8.1, Mac OS 10+, LINUX

Device dimensions: 53 х 58 х 38 mm

Device mass: 57 g

COMPONENT PARTS

• FreeDrive Dashcam 440

• Vehicle windshield mount

• USB cable

• Charging device (mini-USB connector)

• User manual

INTERFACE

1. AV-output

2. Connector for holder with power terminal

3. Reset button

4. Power button

5. MicroSD card slot

6. Menu button

7. Operation mode indicator

8. Display

9. Mode button

10. Down button

11. Up button

12. OK button

13. miniUSB interface

14. Microphone

15. HDMI interface

16. Speaker

17. Lens

BUTTONS AND CONNECTORS

1. AV output

Analog Video/Audio (composite) output for dashcam connection to a TV or monitor.

2. Connector for holder with power terminal

Connect the holder to the connector until it clicks. The dashcam can either be powered with a

dashcam miniUSB connector (13) or a holder miniUSB connector.

3. Reset button

Press the Reset button if the dashcam does not respond when buttons are pressed, and/or when the

external power adapter is connected/disconnected.

4. Power button

When external power is available on connector 13 (or when the holder is connected to the miniUSB

holder connector), the dashcam will automatically switch on and, if an SD card is installed, begin

video recording. However, the dashcam can be switched on/o manually using the Power button.

Briey press the Power button to switch the dashcam on. Press and hold the Power button to switch

the dashcam o. It can also be used for switching the screen on/o (brief press) in any mode.

5. MicroSD card slot

Slot for a microSD card. Please make sure you insert the card into the slot the right way up. If the

card is inserted the wrong way, it may damage the device and card. When a card is inserted into

device, it will be dened as the main data storage device: all previously recorded information on the

card could be lost. Please use high speed cards with recording class 6 or higher.

6. MENU button

Settings menu button. Each dashcam mode (video, photo, playback) has two settings menu tabs. The

rst tab is for customized settings for the current mode. The second tab is for system settings, which

are the same for all three modes. Therefore, common system options can be set from any of the three

modes. And customized settings for one mode can only be set from the corresponding mode.

Menu button additional function: in video recording mode, it locks the current le from being

overwritten.

Stop the video recording to enter the settings menu. Briey press the MENU button. The list of menu

items for all three modes is provided below:

Video Recording Mode -> Video Recording Mode Settings:

Video resolution: video resolution settings in video recording mode.

Available values: FHD/1920х1080 (30 f/s), HD/1280х720 (60 f/s), HD/1280х720 (30 f/s),

WVGA/848х480 (30 f/s).

Recording cycle: duration of recorded video les. Values: O, 3 min, 5 min, 10 min. When selecting

one of the time values, the recording will be made into les of specied length. When the memory is

full, new les will be recorded over the oldest ones.

WDR: Wide Dynamic Range It improves image quality at high contrast lighting: sharp dierence

between dark (shade) and highly lighted areas (in the sun). Values: On, O

G-sensor tracks changes in acceleration, both positive and negative (hard braking or hard

acceleration), thereby automatically identifying incidents and marking the current video le Read_

Only, which prevents it from being overwritten.* Values for sensor sensitivity settings: O, High,

Medium, Low

* If les are locked from being overwritten, or if the G-sensor is switched on with the wrong settings,

the memory card may become full, and the dashcam will be unable to continue recording video. If this

happens, clear the memory card to continue normal operations

Exposure: manual adjustment of sensor light sensitivity. Values: -2.0, -5/3, -4/3, -1.0, -2/3, -1/3 0.0,

+1/3, +2/3, +1.0, +4/3, +5/3, +2.0.

Motion detector: motion detector function on/o: the dashcam will automatically start video

recording when it detects motion. The recording lasts 10 seconds, then the dashcam switches to

standby mode until the next motion is detected. Values: ON/OFF

Microphone: sound recording on/o during video recording. Values: ON/OFF

The microphone can be switched on and o during video recording by briey pressing the DOWN

button.

Date stamp: switch on/o the date/time stamp—video recording date and time information overlay

on the video image. Values: ON/OFF

Number stamp: enable/disable car license plate stamp on video recording. The license plate is

specied in system settings. Values: ON/OFF

Photo mode -> Photo mode settings:

Photo mode: photo mode selection: single photo or timer photo. Values: Single, 2 s, 5 s, 10 s.

Photo resolution: photo resolution settings in photo mode. Values: 12M (4032*3024), 10M

(3648*2736), 8M (3264*2448), 5M (2592*1944), 3M (2048*1536), 2MHD (1920*1080), 1.3M (1280*960),

0.3 (640*480)

Series: a series of photos. When the OK button is pressed, the device takes the number of photos in

succession specied in the current item. Values: O, 3, 5, 10.

Photo quality: photo quality settings in photo mode. Available values: high, normal, low

Sharpness: image sharpness when taking photos. Values: Sharp, Normal, Mild.

White balance: adjustment of the image color gamut when taking photos, depending on dierent

types of lighting source. Values: Auto Balance, Sunny, Gloomy, Tungsten, Fluorescent.

Color: photo color eects. Values: Color, Black&White, Sepia.

ISO: sensor light sensitivity settings. Values: Auto, 100, 200, 400.

Exposure: manual adjustment of sensor light sensitivity. Values: -2.0, -5/3, -4/3, -1.0, -2/3, -1/3, 0.0,

+1/3, +2/3, +1.0, +4/3, +5/3, +2.0.

Stabilization: image stabilization during handheld shooting (jitter). Values: ON/OFF

Stamp: switch on/o the date/time stamp—photo date and time information overlay on image.

Values: O, Date, Date/Time.

Playback Mode -> Playback mode menu:

Delete: delete previously recorded video and photo les. Values: Delete one, Delete all.

Protection: enable/disable protection from overwriting for one or several les.

Values: Protect One, Disable One, Protect All, Disable All.

Slideshow: shows photos in slideshow mode with a delay specied in this item. Values: 2 s, 5 s, 8 s.

System settings (common):

Date/Time: Time/Date settings.

Auto shuto: The dashcam automatically switches o aer a set time when it is inactive. Values:

O, 1 min, 3 min.

Button Sound: sound when buttons are pressed. Values: ON/OFF

Parking Mode: in this mode the switched o dashcam tracks the G-sensor status. As soon as the

dashcam (car) shakes enough to be detected by the G-sensor, the dashcam will switch on and start

video recording. Please note that in most vehicles the cigarette lighter power turns o when the

ignition key is in the OFF position. To ensure that this mode operates correctly, take additional

measures to providing the dashcam with uninterruptible power in parking mode.

Language: system language selection. Values: Russian, English.

AV output: selection of a color coding system for analog AV output. Values: PAL, NTSC.

Frequency: power frequency of lighting devices. This parameter can be used to stop ickering that

occurs during video shooting under articial lighting. Values: Auto, 50 Hz, 60 Hz.

Formatting: MicroSD card formatting. All information will be deleted from the card.

Reset settings: reset all settings to factory settings (by default)

Soware version: displays the dashcam’s embedded soware version.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali DIGMA Telecamera da cruscotto

DIGMA

DIGMA FreeDrive 105 Manuale utente

Manuali Telecamera da cruscotto popolari di altre marche

Cansonic

Cansonic UltraDuo Z2 Manuale utente

Gazer

Gazer F720 Manuale utente

HP f500g Manuale utente

Xblitz

Xblitz TANGO 4K Manuale utente

Rexing

Rexing M1 Manuale utente

Maka Technologies

Maka Technologies Marbella MXPro Manuale utente

NESA

NESA NRC-80DLM Istruzioni per l'installazione e il funzionamento

Kaiser Baas

Kaiser Baas R20 Manuale utente

Boyo

Boyo VTM43TC Manuale utente

Minolta

Minolta MNCD37 Manuale utente

Thinkware

Thinkware FA10 Manuale utente

Momento

Momento MD-5200 Manuale utente

BlackVue

BlackVue DR590X-1CH Manuale utente

HP F300 Manuale utente

CammSys

CammSys BlackSys BH-300 Manuale utente

Snooper

Snooper DVR-2HD Manuale utente

Lukas

Lukas Q900 Manuale utente

RVS

RVS 450C Manuale utente