DIGMA DiVision 300 Manuale utente
USER MANUAL
BENUTZERHANDBUCH / РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
IP-CAMERA
ІР-KAMERA / IP-КАМЕРА
DiVision 300
MODEL: DV300
2
Thank you for choosing DIGMA products!
Before using this device, please carefully read the user manual to ensure proper use and prevent
damage to the product.
The soware, design features of the device, and contents of this manual are subject to change
without prior notice in order to improve the product.
The manufacturer reserves the right to change the conguration, specications and appearance of
the product.
The product manufacturer and the distributors are not liable for damage to the body of the device, or
for the damage caused by an improper or inappropriate use.
en
3
1. INTRODUCTION
Purpose of use
The DiVision 300 home IP camera is designed for a remote surveillance inside the buildings. The
device can be remotely controlled online via the DIGMA SmartLife mobile application.
2. AVAILABLE FEATURES
Online control
With the DIGMA SmartLife mobile app you can remotely connect to the device, monitor the current
situation, or view the recorded videos from anywhere in the world via the internet.
Motion detector
Receive a notication on your mobile when movement is detected in the camera’s eld of vision, and
activate video recording when motion detection is triggered.
Shared access
Share your video camera access, let trusted persons view the image from the device.
Night mode
In conditions of a low lighting, the camera will automatically switch to night mode by activating the
infrared light.
4
Recording to memory card
Enable continuous video recording or activate it during specic events, and view recorded video
segments via the mobile app.
Script support
Set up automation scripts and various actions to perform automatically upon trigger events.
Two-way voice communication
Activate the voice communication function by simply pressing a button in the mobile app.
Android and iOS compatibility
DIGMA SmartLife free application for smartphones and tablets is available for Android (version 5.1
and higher) and iOS (version 8 and higher) operating systems.
5
3. PRODUCT DESCRIPTION
1. Lens
2. Infrared lighting
3. Light sensor
4. Hidden control/reset button
5. Built-in speaker
6. Power connector
7. Built-in microphone
8. Memory card slot
1
2345
6
7
8
6
Device management
The device can be managed:
1. Remotely via the mobile app
2. In manual mode using the control/reset button
Use an appropriately sized thin metal object (such as a pin or clip, etc.) to press the control/reset
button
Press the button quickly to turn on/o voice prompts.
Press and hold (more than 5 s) the button to reset the parameters to factory settings and switch the
device to the conguration/pairing mode.
Attention!
When the device is switched to the conguration mode, the device settings, including the wireless
network access settings, are reset to default values. To restore the device remote control you will
need to re-congure it via the application.
Attention!
On resetting, the device will stay linked to the account. To link the camera to another account you
must rst unregister from the current account.
7
4. GETTING STARTED
An initial setup must be performed in order to manage the device via the mobile app. To do this:
1. Connect your mobile device to a 2.4 GHz standard wireless network.
2. Download the DIGMA SmartLife app from the app store on your mobile device.
3. Launch the DIGMA SmartLife app. Register your account by following the tips on the screen (for
new users), or log in using your existing credentials.
4. Go to the My Devices section. Click the + icon in the upper right corner to add a new device and
select the device type to be connected (Smart camera).
5. Put the device in the conguration mode by pressing and holding the on/o button (you will
hear a conrmation sound, and then the voice messages “Reset to factory settings” and “Network
connection required”).
6. Follow the setup instructions on the mobile device screen:
• Make sure your mobile device is connected to a WiFi network and enter the access password
• Click the Conrm button and wait until the application detects a congurable device. Wait for the
progress indicator to reach 100%.
• Aer successful conguration you will hear the voice message “The network connection has been
established”.
• Assign a suitable name to the camera and complete the setup by pressing the Done button.
8
Aer the setup has been completed, the camera is ready for use and will appear in the list of
connected devices on the main screen of the app in “My Devices” section.
To view the image from the camera, click on the line with the camera name on the main screen. A
viewing window will open. The following controls are available in this window:
1 Date/Time display
2 Advanced settings menu button
3 WiFi signal indicator
4 Enabling the audio channel listening
5 Change the viewing quality
6 Switching to the full screen mode
7 Switching between the online and recorded video
8 Quick setup of the motion detector
9 Activating the two-way communication
10 Camera tilt and rotation control*
11 Video recording
12 Screenshot
*For cameras with the rotary mechanism
9
5. ADVANCED SETTINGS
1. The device is equipped with the voice alerts for operation modes/states. Quickly press the
control/reset button once to deactivate the voice alerts. Aer releasing the button you will hear a
conrmation sound.
Quickly pressing the control/reset button again reactivates the voice alerts.
2. The user can set up/change the following parameters in the camera’s advanced settings menu:
• Change the device name
• View the list of trusted users that have access to the device
• View the basic device information
• Enable/disable the date/time display
• Congure the motion detector settings
• Congure the settings for recording to a memory card
• Check for rmware updates
• Cancel/remove the device link to the current account (required to link the camera to another
account).
3. The user can access the following functions in the account settings menu (My Account):
• Account prole setup
• View/edit the script list
• View/edit the list of trusted users who have guest access to the connected devices
• Message Centre access — view the events for which notications have been received
10
4. In the “Scripts” section, the user can congure various scripts to run automatically upon trigger
events, or run scripts manually.
6. MAIN TECHNICAL SPECIFICATIONS
Maximum resolution
• 1920 х 1080 FHD
Frame frequency
• 15 fps
Lens material
• Glass
Focus distance
• 3.6 mm
Viewing angle
• 90°
Night mode
• Yes
Supported networks
• 2.4 GHz IEEE 802.11 b/g/n
Intercom function
• Yes
Recording to a memory card
• Supported (up to 64 GB)
Motion detector
• Soware
Dimensions, mm
• 66 х 66 х 106
Weight, g
• 73.2
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali DIGMA Telecamera IP
