DIGMA smart home DiVision 600 Manuale utente
USER MANUAL
BENUTZERHANDBUCH / РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
IP-CAMERA
ІР-KAMERA / IP-КАМЕРА
DiVision 600
MODEL: DV600
2
Thank you for choosing DIGMA products!
Before using this device, please carefully read the user manual to ensure proper use and prevent
damage to the product.
The soware, design features of the device, and contents of this manual are subject to change
without prior notice in order to improve the product.
The manufacturer reserves the right to change the conguration, specications and appearance
of the product.
The product manufacturer and the distributors are not liable for damage to the body of the device,
or for the damage caused by an improper or inappropriate use.
en
3
1. INTRODUCTION
Purpose of use
The DiVision 600 home IP camera is designed for a remote surveillance outside and inside the
buildings. The device can be remotely controlled online via the DIGMA SmartLife mobile application.
2. AVAILABLE FEATURES
Online control
With the DIGMA SmartLife mobile app you can remotely connect to the device, monitor the current
situation, or view the recorded videos from anywhere in the world via the internet.
Motion detector
Receive a notication on your mobile when movement is detected in the camera’s eld of vision,
and activate video recording when motion detection is triggered.
Shared access
Share your video camera access, let trusted persons view the image from the device.
Night mode
In conditions of a low lighting, the camera will automatically switch to night mode by activating
the infrared light.
4
Recording to memory card
Enable continuous video recording or activate it during specic events, and view recorded video
segments via the mobile app.
Script support
Set up automation scripts and various actions to perform automatically upon trigger events.
Two-way voice communication
Activate the voice communication function by simply pressing a button in the mobile app.
Android and iOS compatibility
DIGMA SmartLife free application for smartphones and tablets is available for Android (version 5.0
and higher) and iOS (version 9 and higher) operating systems.
5
3. PRODUCT DESCRIPTION
1. Lens
2. Infrared lighting
3. Light sensor
4. Сontrol/reset button
5. Built-in speaker (under cover)
6. Power connector
7. Built-in microphone
8. Memory card slot (under cover)
9. RJ45 connector
10. Swivel mount
11. External removable antenna
12. SD card cover
13. Removable hood screw
13
58
12
10
3
1
2
69
4
11
7
6
Device management
The device can be managed:
1. Remotely via the mobile app
2. In manual mode using the control/reset button
Press the button quickly to turn on/o voice prompts.
Press and hold (more than 5 s) the button to reset the parameters to factory settings and switch the
device to the conguration/pairing mode.
Attention!
When the device is switched to the conguration mode, the device settings, including the wireless
network access settings, are reset to default values. To restore the device remote control you will
need to re-congure it via the application.
Attention!
On resetting, the device will stay linked to the account. To link the camera to another account you
must rst unregister from the current account.
7
4. GETTING STARTED
Attention!
Before turning on the camera, make sure that the external WiFi antenna is securely fastened in the
appropriate connector on the device. Turning on the camera without an antenna installed may cause
damage to the device.”
An initial setup must be performed in order to manage the device via the mobile app. To do this:
1. Connect your mobile device to a 2.4 GHz standard wireless network.
Attention!
The wireless network settings must follow the mentioned below conditions for the device to work
correctly:
• The Hide Network ID (SSID) feature is disabled
• It must be used encryption method WPA_PSK / WPA2_PSK
• Dynamic Host Conguration Protocol (DHCP) must be activated
• The access point name must contain Latin characters only
2. Download the DIGMA SmartLife app from the app store on your mobile device.
3. Launch the DIGMA SmartLife app. Register your account by following the tips on the screen
(for new users), or log in using your existing credentials.
4. Go to “My devices” / “My group”. Click the “+” icon in the upper right corner to add a device and
select the device type “Smart Camera”. In the window that opens, click the setup wizard selection
button in the upper right corner and select one of the conguration methods supported by the
camera: “QR code” (recommended) or “Quick setup” (if the recommended method did not work).
8
5. Put the device in the conguration mode by pressing and holding the on/o button (you will
hear a conrmation sound, and then the voice messages “Reset to factory settings” and “Network
connection required”).
6. Follow the instructions of the setup wizard on the mobile device screen:
• Make sure your mobile device is connected to a Wi-Fi network compatible standard and enter the
access password
• Click “Continue” / “Next Step” and follow the further instructions of the setup wizard.
• Aer you are connected to the network, give the device a suitable name and complete the setup.
Aer the setup has been completed, the camera is ready for use and will appear in the list of
connected devices on the main screen of the app in “My Devices” section.
To view the image from the camera, click on the line with the camera name on the main screen.
A viewing window will open. The following controls are available in this window:
1 Date/Time display
2 Advanced settings menu button
3 WiFi signal indicator
4 Enabling the audio channel
listening
5 Change the viewing quality
6 Switching to the full screen mode
7 Switching between the online and
recorded video
8 Quick setup of the motion
detector
9 Activating the two-way
communication
10 Camera tilt and rotation control*
11 Video recording
12 Screenshot
*For cameras with the rotary
mechanism
1
11
8
7
4
5
2
3
6
10
12
9
9
5. ADVANCED SETTINGS
1. The device is equipped with the voice alerts for operation modes/states. Quickly press the control/
reset button once to deactivate the voice alerts. Aer releasing the button you will hear a conrmation
sound.
Quickly pressing the control/reset button again reactivates the voice alerts.
2. The user can set up/change the following parameters in the camera’s advanced settings menu*:
• Change the device name
• View the list of trusted users that have access to the device
• View the basic device information
• Enable/disable the date/time display
• Congure the motion detector settings
• Congure the settings for recording to a memory card
• Check for rmware updates
• Cancel/remove the device link to the current account (required to link the camera to another account).
3. The user can access the following functions in the account settings menu (My Account)*:
• Account prole setup
• Message Centre access — view the events for which notications have been received
4. In the “Scripts” section, the user can congure various scripts to run automatically upon trigger events,
or run scripts manually.
5. Using a wired connection.
A wired connection to the local network is used as the primary or backup link to the Internet.
Wired connection becomes possible only aer the initial device is fully congured and linked to an
account.
*The list of available functions may be changed during the system renement process
10
7. TECHNICAL SPECIFICATIONS
6. PRECAUTIONARY MEASURES
Image sensor
• Sensor type: 1/2.7" CMOS sensor
• Resolution: 1920 × 1080 px, FHD
Lens
• Lens type: All-glass
• Lens: 3.6 mm
• Viewing angle: 75°
• Day/Night mode: Double infrared lter
• Coverage range in night mode: 8-10 m
Wireless connection
• Wi-Fi IEEE 802.11 b/g/n
(2.4 ГГц, 150 Mbps (Max))
Wired connection
• Type supported network/connector:
RJ45
Audio
• Built-in microphone and speaker
•Audio compression format: AAC & G711
Main functions
• Video/image compression format: H.264
• Resolution: 1080P
• Frame rate: 15 fps
• Recording to a TF card
• TF card (up to 32 GB*) slot
• Mobile apps for iOS and Android
• Motion sens
• Protection class dust and water protection: IP63
General
• Power adapter
• Compatible with iOS and Android devices
• Dimensions: 132 × 65 × 65 mm
• Mass: 332 g
*Support larger cards is possible, but not guaranteed.
The device is assigned an IP63 protection class, which means that the device is reliably protected
from dust penetration and vertically falling spray, including precipitation.
It is forbidden to immerse the device in water or expose to jets of liquid.
When mounting the device, always observe the orientation: the camera must be installed so that the
protective cover of the SD card compartment faces vertically downwards.
When installing the card cover, make sure that the cover, sealing gasket and the cover seat are dry
and clean, dust, moisture and foreign particles are missing. Aer installing the cover, always tighten
the xing screws tightly.
Indice
Lingue:
Altri manuali DIGMA Telecamera IP
