Dilog DLPT2+ Manuale utente
DLPT2+
Operating Instructions
2
DLPT2+
DLPT2+
Operating Instructions
Di-LOG Test Equipment
28 Wheel Forge Way
anchester
17 1EH
Tel: 0161 877 0322
www.dilog.co.uk
403A592 Rev 2
DLPT2+
Operating Instructions
3
Limited Warranty & Limitation of Liability
DILOG Electronic Limited guarantees this product to
be free from defects in material and workmanship
under normal use and service for a period of 1 year.
The period of warranty will be effective from the day
of delivery.
(c) Copyright 2019
All rights reserved. Nothing from this edition may be
multiplied, or made public in any form or manner,
either electronically, mechanically, by photocopying,
recording, or in any manner, without prior written
consent from DILOG Electronic Limited. This also
applies to accompanying drawings and diagrams.
Due to a policy of continuous development DILOG
Electronic Limited reserves the right to alter the
equipment specification and description outlined in
this publication without prior notice and no part of
this publication shall be deemed to be part of any
contract for the equipment unless specifically
referred to as an inclusion within such contract.
DLPT2+
Operating Instructions
4
Disposal of old product
This product has been designed and manufactured
with high quality materials and components that can
be recycled and reused.
When this symbol is attached to a product it means
the product is covered by the European Directive
2012/19/EU.
Please familiarise yourself with the appropriate local
separate collection system for electrical and
electronic products.
Please dispose of this product according to local
regulations. Do not dispose of this product along with
normal waste material. The correct disposal of this
product will help prevent potential negative
consequences for the environment and human
health.
DLPT2+
Operating Instructions
5
Contents
1
Important Information ...................................... 6
2
Introduction .................................................... 17
3
Performing Tests ............................................ 19
3.1
Checking a mains power outlet ............. 19
3.2
Testing a Class I Appliance ................... 20
3.3
Testing a Class II Appliance .................. 25
3.4
Testing a mains cord ............................. 28
3.5
Testing an extension lead...................... 29
3.6
Changing the Insulation Test Voltage ... 30
3.7
Changing the CLI Leakage limit ............ 30
3.8
Performing an RCD test on an installation
RCD ............................................................... 31
3.9
Performing an RCD test on a Plug top
RCD ............................................................... 32
3.10
Performing a 3-Phase Sequence .......... 33
4
emory & Print Functions .............................. 35
4.1
Saving Test Results ............................... 35
4.2
Viewing Test Results ............................. 35
4.3
Deleting Test Results ............................. 35
4.4
Transferring Test Resuits ...................... 35
4.5
Printing Test Results ............................. 36
4.6
Setting the Real Time Clock .................. 36
5
Specification ................................................... 38
6
aintenance ................................................... 40
7
Battery Check ................................................ 40
7.1
Battery Replacement ............................. 41
8
Fuse Replacement ..................................... 42
9
Service and Calibration .................................. 43
DLPT2+
Operating Instructions
6
1 Important Information
These operating instructions are intended for the
use of adequately trained personnel.
The following symbols are used in these operating
instructions and on the DLPT2+.
Caution, risk of electric shock.
Indicates instructions must be followed to
a oid danger to persons.
Caution, risk of danger. The operating
instructions must be adhered to in order
to a oid danger.
Before use, ensure unit is clean and dry; visually
inspect all leads, connectors, and case. Any
damage or wear must be rectified prior to use.
If the
DLPT2+
is used in a manner not
specified by these operating instructions
then the protection pro ided may be
impaired.
Always ensure that the circuit or
appliance under test is electrically
isolated.
The
DLPT2+
and all associated cables and
leads must be checked for signs of
damage before equipment is operated. Do
not use if there are signs of damage. Only
use the correct leads supplied with the
DLPT2+.
Do not touch
test probes beyond the hand
barrier on the test probe.
DLPT2+
Operating Instructions
7
The
DLPT2+
may apply high oltage or
mains power to the appliance under test.
Do not touch conducti e parts of the
appliance while tests are acti e.
If the
DLPT2+
is being used to determine
the presence or absence of hazardous
oltages, always pro e the operation of
oltage measurement function before and
after use by means of a known oltage
source or pro ing unit.
Do not operate the
DLPT2+
in an
explosi e gas or dust en ironment.
The
DLPT2+
has been designed to make
measurements in a dry en ironment.
Do not open the
DLPT2+
, no user
ser iceable parts.
Note: Data may be lost or altered in virtually
any electronic memory under certain
circumstances. Therefore DILOG
Electronic assumes no responsibility for
financial losses or claims due to data lost
or otherwise rendered unusable whether
as a result of abuse, improper use,
defects, disregard of operating
instructions or procedures, or any allied
causes.
DLPT2+
Operating Instructions
8
Standard Accessories
Part Number
DILOG DLPT2+ Unit DLPT2+
Operating Instructions
403A592
Optional Accessories
Part Number
TPA 5/16 Phase Adaptor
TPA 5/32 Phase Adaptor
TPA 4/16 Phase Adaptor
TPA 4/32 Phase Adaptor
Ni H Batteries and charger 339A950
PATGuard 3 software can also be trialled and
purchased online from the below web address:
www.DILOG.co.uk/pg3trial
DLPT2+
Operating Instructions
9
Figure 1. DLPT2+ Front View
DLPT2+
Operating Instructions
10
Figure 2. DLPT2+ End View
Figure 3. Testing CLI appliances, no mains leakage
Indice
Altri manuali Dilog Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
