ASSEMBLY DimasTec EasyXL V.1.0 – STEP-11
- T e DimasTec EasyXL V.1.0 as t e
possibility to mount No.9 spacers
VC015_M3_25mm_M-F (16) in any of
t e No.22 M3 t readed oles
available to you according to t e type
of mot erboard you ave purc ased
or to t e arrangement to You
preferred, t e image as t e sole
purpose of illustrating t e possible
positions of t e parts.
- Align t e spacers
VC015_M3_25mm_M-F (16) to t e
corresponding t readed oles M3 of
t e DimasTec EasyXL V.1.0 and
fasten, as s own in t e figure beside.
ASSEMBLY DimasTec EasyXL V.1.0 – STEP-12
- Align t e oles in t e mot erboard
(item not included) wit t e spacers
VC015_M3_25mm_M-F (16), and
fasten wit screws VC049_M3x6 (21),
as s own in t e figure beside.
T e number of screws to be used will
be t e same as t e spacers mounted
according to t e mot erboard, t e
image as t e sole purpose of
illustrating t e possible positions of
t e parts.
Note: T e number indicated in t e brackets indicates t e corresponding
identification in t e table on t e page No.2
