Dinetik DT Series Manuale utente
DINETIK
DT series
Professional 3D printer
User Manual
All rights reserved. © 2019 Dinetik.com
Organize your designs with Project Folders on AstroPrint........................
30
First print....................................................................................................
12
Bed coating................................................................................................
Upload & Import your 3D designs: STLS, GCODES, & X3G FILES…............
AstroBox Touch….......................................................................................
Troubleshooting........................................................................................
35
Control your 3D printer from the astroprint mobile app (IOS & ANDROID)
27
Printer maintenance..................................................................................
14
Chamber heaters.......................................................................................
15
10
Get ready
Contents
Safety..........................................................................................................
General information...................................................................................
First startup................................................................................................
Web UI (User interface).............................................................................
3
6
7
8
Astroprint desktop…...................................................................................
13
Other
Calibrating.................................................................................................
33
Slice files online and send them to your 3D printer…...............................
16
19
23
All rights reserved. © 2019 Dinetik.com
3
HOT PRINT BED
The printing pad may heat up to 120 °C, which may cause the surrounding surfaces to heat
up. Be careful and make sure the surfaces are cool before touching them.
The printing bed can only be cleaned after it has cooled completely to a room temperature.
Use standard non-flammable household or glass cleaners.
Safety
SAFE PLACEMENT
The printer power supply and Internet cables must be routed in such a way that they would
not create a risk for tripping or damage in any other way.
The printer must be on a stable and smooth platform. Remember that the printer is heavy,
so be careful when moving it.
HOT SURFACES AND PARTS
To prevent burns and physical injury, do not touch the printer nozzle, printer pad, or
chamber heaters unless they have cooled to 40 °C or lower. You can see the nozzle and pad
temperatures on the printer screen or other printer interfaces. Keep in mind that in the
event of a fault, the displayed temperature may not be displayed correctly. The
temperature of the chamber heaters is not displayed, so it is strictly forbidden to touch
them for at least 15 minutes after the heaters have been turned off.
Dinetik 3D printer is an electro-mechanical
robotic device that has hot and moving parts when
operating. You should always operate the printer with
caution and follow the instructions in this manual.
INDOOR USE ONLY
The printer should only be used in rooms with temperatures between 15 °C and 30 °C.
Dinetik DT32 printer must not be exposed to high humidity, water, cold, excessive heat, or
any other factor that could damage the electronics or mechanical parts. If the printer was
transported, it should be left at room temperature for about 1 hour before switching it on,
and switched on only then.
All rights reserved. © 2019 Dinetik.com
4
HOT MELTED PLASTIC
The melted plastic extruded from the nozzle can reach near
300°C. Care and caution must be taken when operating.
WARM PARTS
During extended printing, the chamber's heating may cause the printer frame and other
exterior parts to heat up to 60 °C. Be careful before touching it.
CLEANING
It is strictly forbidden to use liquid or spray cleaners to clean hot parts of the printer. Use a
thick paper towel to clean the nozzle or the bed. If thorough cleaning is required, the
printer must be cool and unplugged.
MOVING PARTS
The printing chamber contains moving mechanical parts that cannot be touched during
printing.
ELECTRICAL SAFETY
The printer should not be stored in rooms subject to high humidity, near open windows, or
where liquids may be allowed to enter the printer. Do not leave the printer unattended
while it is in use. Always make sure that the power cord is free from damage or corrosion.
Never use old or used electrical cables. You must make sure that the electrical outlet is
properly grounded and not damaged.
STATIC ELECTRICITY
Release your body’s static electricity by touching a grounded
object before any repair or service operation. POWER MUST BE
OFF AND CABLE UNPLUGGED BEFORE ANY WORK.
TOXIC FUMES
The printer will emit a small amount of toxic fumes and smell when printing, especially
with ABS plastic.
Therefore, the premises where the printer is located,
must be well ventilated. The odour, toxicity, and intensity of fumes will
vary based on the type of material used.
All rights reserved. © 2019 Dinetik.com
5
NOT A TOY FOR CHILDREN
The printer must not be left unattended with children. Children
must always be accompanied and supervised by an adult when
using or observing this product. Do not leave the printed objects,
waste filament, and tools unattended within the reach of small
children to avoid harm and choking hazard. Be careful when
tooling printed objects
WARNING
The nozzle, print bed, and
chamber heaters are
extremely hot when printing.
Do not touch.
All rights reserved. © 2019 Dinetik.com
6
Support
Whenever you need support for your Dinetik 3D printer,
Software
Dinetik 3D printers have an integrated slicer — a cloud
slicer that you use to prepare models for printing and control of
the printer when printing from a computer or web UI. ''Astroprint desktop'' can be used
with Windows, Mac and Linux systems.
Maintenance
Dinetik 3D printers have been designed to last as long as possible without much
maintenance.
In order to ensure long and smooth printer operation, please use the tips provided in the
‘Printer maintenance’ section
General information
Experimenting
Once you start printing, you will want to tweak this or that, but the possibilities can be
intimidating at first. This manual is NOT designed to cover all possible printing
situations, but rather to help you start experimenting along the path. Discussing every last
software setting is beyond the scope of this manual as well — the best places for that are
online forums, local FabLabs or 3D printing meet-ups.
Safety
Please read the safety chapter. Dinetik printers are designed
to be safe to use, but you do need to have a general understanding
of its safe operation.
Printing Material
Dinetik 3D printers are designed to work with printing material
from any seller — 1.75mm thermoplastic filaments.
All rights reserved. © 2019 Dinetik.com
7
7. Ready to print
When calibration is completed, the printer is ready to print.
Warning - If the printer does not warm up to room temperature before operation there
could be electrical issues due to condensation.
The power switch is at the front of the printer.
5. Booting up
Wait for boot up to complete and follow on-screen instructions.
2. Select ''Auto calibration'' and follow the on-screen instructions
6. Calibrating
When the printer is ready, automatic calibration is required (Page: 14)
1. On the home screen press ''Utilities''
3. Plug in the power cable
This is important — especially in cold weather. In winter, it may take a long time for the
printer to warm up, so don’t rush it.
4. Turn on the printer
First startup
Be careful, the printer is heavy. Try to avoid impacts.
2. Let the printer warm up to room temperature
1. Unbox the printer
All rights reserved. © 2019 Dinetik.com
8
3. Tap on Internet
2. Tap on Network
WEB UI (USER INTERFACE)
Your AstroBox Touch has a Web UI in addition to the Touch UI. The Web UI is the same
that you can find in the AstroBox Gateway and it's useful when you want to reach your
In order to access your AstroBox Web UI follow these steps:
1. Tap on Settings
All rights reserved. © 2019 Dinetik.com
9
5. Open in a browser http://<ip_address> by using a computer, tablet, or phone
connected to the same network.
4. Pay attention to the IP address and the network you're connected to.
All rights reserved. © 2019 Dinetik.com
10
Once you select your Printer, Material, and Quality in the bottom horizontal bar, the
GCODE viewer button will become visible on the right-hand side next to the PRINT button
It will be labeled PREVIEW. (not GCODE viewer)
2. Select printer, material, and quality
1. Download your Astrobox: https://www.astroprint.com/products/p/astroprint-desktop
ASTROPRINT DESKTOP
AstroPrint Desktop software takes 3D printer management to the next level with a mix of
offline and cloud-connected features. Managing your 3D Printer has never been easier.
Compatible with Mac OS X, Windows, and Linux.
All rights reserved. © 2019 Dinetik.com
Questo manuale è adatto per i seguenti modelli
1
Indice
