Dish Network 159263 Manuale utente
Remote Control
User Guide
Remote Control
User Guide
To read out your remote codes, see page 8 for instructions.
If you enter a “1” as the last number of your code,
your remote is in Limited Mode (see page 3 for more details).
Auxiliary Equipment Code
C-1
SAT
POWER
I
MENU
GUIDE
B
R
O
W
S
E
T
H
E
M
E
S
MUTE
RECALL
SKIP
BACK
PAUSE
PLAY
RECORD
VOLUME
def
DVR
TV
VCR
AUX
TV
PAGE
CANCEL
INFO
VIEW TV
SKIP
FWD
FWD
P
O
S
I
T
I
O
N
Refer to page 9 for detailed instructions on Learning
Refer to page 11 for detailed instructions on System Wizard
Learning and System Wizard
C-2
Separate the key
from the remote
by inserting
your thumbnail
or a coin in the
crease. Remove
the key by
grasping at
the bottom.
Insert the
key face up
and slide
into place.
Pull the
remote
battery
cover off.
Note: If you will be using the blue TV2 key that comes
already installed in your remote, skip this step and
proceed with the next step (Insert the Batteries).
Install the Key Correctly
1
Insert the Batteries
2
1
4
2
1Replace
the
remote
battery
cover.
Insert 4 AAA
batteries,
making sure
to match the
plus (+) ends
with the plus
markings on
the battery
case.
2
Quick Setup
3Change the
UHF/IR
SWITCH
to IR
C-3
Quick Setup
Confirm that your remote operates your
receiver by pressing remote buttons. If
your remote has a blue number 2 key, you
may need to go to your remote TV2 location to
confirm your remote operates your receiver.
If this is not working, go back to step 5.
Making the Remote Work
With Your Receiver
3
6
RECORD
Turn your receiver and
TV on, and press
SYSTEM INFO on the
front of the receiver.
Confirm that you
see the System
Information screen.
Press RECORD on
your remote. The remote
address will probably
change on the screen.
3
2
1
5
4
REMOTE
ANTENNA
Verify the UHF antenna
is installed on the back
of the receiver. Verify
the UHF/IR Switch
is set to UHF.
If you installed this key,
continue with step 2 on this page. If you installed this
key, go to page 14
inside this guide.
C-4
Quick Setup
Press
POWER.
Press
POUND.
The TV Mode
button will
flash three times.
Program the Remote to
Control Your TV
12
34
56
To program the remote control to operate a
TV, you can enter an Equipment Code (see
instructions on page 3).
Or, follow the steps below to scan the
database of all Equipment Codes.
Or teach your remote the commands for
your TV (see instructions on page 9).
Press the UP ARROW on the
remote repeatedly (1 press per
second) until your TV turns off.
Press the POWER button
to turn the TV on and
try other buttons to make
sure the code works. If you
want to try another code,
start over from step 1.
Press & hold the
TV Mode button until all
Mode buttons light up.
Turn your TV on.
C-5
Quick Setup
Programming the
Recover Button for
TV2 Operation
For TV2 Remote Controls on
DISH Player-DVR 522, 625, 942
and ViP222, VIP222k, ViP622 DVR,
ViP722 DVR, ViP722k DVR Receivers
Press
STAR.
Press
POUND.
1 2
Press & hold the
TV Mode button
until all Mode
buttons light up. Enter the channel
number you tune
your TV to when
you watch satellite
programming.
4
3
Use the RECOVER button as described in
If You Lose Your Picture on the next page (C-6).
Programming your RECOVER button allows you
to easily regain satellite programming if you
accidentally change TV channels or inputs.
Quick Setup/Operation
C-6
SELECT
Press and hold RECOVER until all
mode buttons light up.
If you see the System Information
screen, proceed to step 4.
Otherwise, continue to step 3.
Press RECOVER again & wait until
the mode lights stop flashing. If you
see the System Information screen,
go to step 4. If not, repeat this step
until you do.
Press SELECT to resume watching TV.
Use the RECOVER button to get back to watching
satellite programming if you accidentally change
channels or inputs on your TV.
Placing Your Remote
in Limited Mode
If You Lose Your Picture
(How to Use the RECOVER Button)
Press
POUND.
Press & hold the
TV Mode button
until all Mode
buttons light up.
23
1
1
2
3
4
Press the
PAGE UP
button.
To take the remote out of Limited Mode, use the PAGE DOWN
button instead of the PAGE UP button in step 2.
(Your screen may be different)
Limited Mode locks out all the TV mode operations except
for TV power, Mute, and Volume. This prevents you from
accidentally tuning away from satellite programming.
Receiver Power & TV Power
Top button turns the receiver on/off,
Bottom button turns the TV on/off
Programming required (see C-4)
Input
Press once for Input,
Press and hold
for Recover
Operation
Remote Operation
SAT Mode
SAT
Control TV volume
Programming required (see C-4)
Volume & Mute Buttons
To use the features described in this section, make
sure you are in SAT mode by pressing the SAT Mode button.
Note: Some features may not be available depending on your receiver model.
Page Buttons
Page up/down in
menus
Program Guide
Display current and
future satellite
program listings
Arrows/Select
Buttons
Channel up/down,
navigate through
menus and select
a desired option
Browse
See what is on other
channels while
watching TV
View Satellite
Programming
Exit out of any menu/
guide and go back to
viewing live TV
Number Buttons
Enter a channel
number, or navigate
thorough menus
System Wizard
Press and hold
to fix remote
control issues
and sync data
DishHOME
Explore interactive
TV features
Receiver Menu
Access receiver
features and settings
Themes
Search for programs
using Themes
Recall
Go back to last
channel viewed
Info
Get info on programs
Search
Search for a program
Shortcut Keys
(for future use)
Digital Video
Recorder (DVR)
Buttons
Pause live TV and
play or record
programming
Picture-In-Picture
(PIP) Buttons
Watch two separate
programs at once
(in Single Mode)
Format
Format the picture
to the desired width
to match the program
you are viewing
C-7
Press this
button for
SAT Mode
C-8
Operation
Remote Operation
TV Mode
To use the features described in this section, make
sure you are in TV mode by pressing the TV Mode button.
Remote programming is required. See C-4 for instructions.
Note: If you have programmed the remote in Limited Mode (C-6),
only the TV Power, Mute and Volume buttons will control your TV.
TVTV
Note: Remote operation is different on DISH Network TVs.
See your DISH Network TV User's Guide for proper operation.
Press this
button for
TV Mode
Up/Down
Arrow Buttons
Channel up/down
on TV
Number Buttons
Enter a desired
channel number
on TV
TV Menu
Access menu
features available
on some TVs
Input
Switch between
TV inputs
Mute
Turn TV volume
on or off
Recall
Go back to last
TV channel viewed
Picture-In-Picture
(PIP) Buttons
Display PIP features
on some TVs with
PIP capabilities
C-8
Volume
Control TV
volume
Receiver Power
& TV Power
Turn the TV on/off
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Dish Network Telecomando
Dish Network
Dish Network DISHPlayer 500 7100/200 Manuale utente
Dish Network
Dish Network EZ Manuale utente
Dish Network
Dish Network 40.0 Manuale utente
Dish Network
Dish Network Remote Control Manuale utente
Dish Network
Dish Network 104333 Manuale utente
Dish Network
Dish Network 6.3 Manuale utente
Dish Network
Dish Network 167820 Manuale utente
Dish Network
Dish Network Solo 301 Istruzioni utente
Dish Network
Dish Network 311k Manuale utente
Dish Network
Dish Network Platinum 121716 Manuale utente
Dish Network
Dish Network 40.0 Manuale utente
Dish Network
Dish Network Duo ViP 222 Manuale utente
Dish Network
Dish Network 52.0 Manuale utente
Dish Network
Dish Network 54.0 Manuale utente
Dish Network
Dish Network 20.1 Manuale utente
Dish Network
Dish Network Platinum Plus 121150 Manuale utente
Dish Network
Dish Network 3.1 Manuale utente
Dish Network
Dish Network BASIC REMOTE Manuale utente
Dish Network
Dish Network 20.1 Manuale utente
Dish Network
Dish Network ViP 922 Slingloded DVR Manuale utente
