Dji Zenmuse X5 Manuale utente

Gimbal and Camera

This chapter provides the technical

specications of the camera and explains

the working mode of the gimbal.

Camera and Gimbal

CameraProle

The Zenmuse X5 offers advanced photographers a high-performance, robust gimbal and camera system

with an M4/3 interchangeable lens. The Type 4/3 CMOS sensor supports video recording in 4K and

16MP still photos.

The Zenmuse X5 lens kit comes with the DJI MFT 15mm f/1.7 ASPH that provides a 72 degree eld of

view and a manually adjustable f/1.7-f/16 aperture range. The camera can shoot burst, AEB or time-lapse

in JPEG and DNG RAW, and output video in MP4 and MOV formats. Live HD video from the camera can

be viewed on your mobile device through the DJI GO app.

The 3-axis gimbal provides an incredibly stable platform for the camera to capture clear shots even

during high speed maneuvers. The gimbal tilts the camera across a -90° to +30° pitch angle and pans a

full 360 degrees.

Camera Micro-SD Card Slot

To store your photos and videos, plug in the micro-SD card into the slot shown below before powering on

the Inspire 1 Pro. The Inspire 1 Pro comes with a 16GB micro-SD card and supports up to a 64GB micro-

SD card. A UHS-1 type micro-SD card is recommended, because the fast read and write capability of

these cards enables you to store high-resolution video data.

Do not remove micro-SD card from the Inspire 1 Pro when it is powered on.

Camera Data Port

Power on the Inspire 1 Pro and then connect a USB cable to the Camera Data Port to download photos or

videos from the camera to your computer.

INSPIRE 1 PRO User Manual

Power on the aircraft before attempting to download the les.

Status LED

The Status LED describes the working status of the camera.

Status LED

Status LED Camera Status

Solid Green Powered on; system is on standby.

Blinks Green quickly (0.1 on, 0.2s off) System is warming up.

Blinks Green once (0.2s off) Taking a single photo.

Blinks Green 3 times (0.2s on, 0.2s off) Burst shooting 3 to 5 photos.

Blinks Red slowly (0.8s on, 0.8s off) Recording video.

Blinks Green and Red alternatively

(0.8s Green, 0.8s Red) Firmware update in progress.

Blinks Red quickly (0.2s on, 0.3s off) SD card error.

Solid Red Firmware update failed.

Blinks Red twice (0.1s on, 0.1s off) Camera overheated.

Camera Operation

Use the Shutter and Record button on the remote controller to shoot the images or the videos through the

DJI GO app. For more information about how to use these buttons, refer to “Controlling Camera” P27.

INSPIRE 1 PRO User Manual

Gimbal

GimbalProle

The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture

stabilized images and video. The Gimbal can tilt the camera up to 120 degrees and rotate 360

degrees.

Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note that

you cannot control the pan motion of the camera by default. Enable the “Master-and-Slave” mode and

set the remote controller to “Slave” state if you wish to control both the pan and pitch movement of the

camera.

Pan Control

Follow the instructions below to use the gimbal dial to control the pan movement of the gimbal:

1. Power on the aircraft and remote control, launch DJI GO app and enter “Camera” page.

2. Tap “RC Control Settings” icon and select either C1 or C2 customizable button as the gimbal pitch/

yaw switching button.

3. Select “Gimbal Pitch/Yaw” from the dropdown list.

+320°

-320°

+30°

-90°

0°

INSPIRE 1 PRO User Manual

Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the

gimbal under yaw mode. Press C1 or C2 again to exit yaw mode.

While pressing the C1 button, turn the gimbal dial to focus the X5 camera manually.

While pressing the C2 button, turn the camera settings dial to ne tune the roll axis of the gimbal.

Using DJI GO App to Control Gimbal

Follow the steps below to use DJI GO app to control the gimbal orientation:

1. Launch DJI GO app, enter “Camera” page.

2. Tap and press on the screen until a blue circle is shown.

3. Slide to control the gimbal orientation within the “Camera” page as shown below.

RC Control Setting

Remote Control Calibration

Stick Mode

Gimbal Pitch/YawC1 C2 Reset gimbal yaw

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

You can customize the C1 and C2 buttons on the back

of the remote controller.

Linking Remote Controller

Safe to Fly (GPS)

P-GPS

H: D:

V.S

M/S M/S

H.S

4.22.3

39M210M

232M

AF/MF

1/320 4821 4K 24

ISO 100 EV 0F 0 LOG

INSPIRE 1 PRO User Manual

Follow Mode

The angle between Gimbal’s orientation and aircraft’s nose remains

constant at all times. One user alone can control the pitch motion of the

Gimbal, but a second user is required to control the pan motion using a

second remote controller.

FPV Mode The Gimbal will lock to the movements of the aircraft to provide a First-

Person-View ying experience.

Free Mode

The Gimbal’s motion is independent of the aircraft’s orientation. One user

alone can control the pitch motion of the Gimbal, but a second user is

required to control the pan motion using a second remote controller.

Re-alignment

Tap to force the Gimbal orientation to re-align with aircraft’s orientation

by panning from gimbal’s current orientation. Pitch angle will remain

unchanged during the re-alignment.

Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2)

Gimbal has received an excessive external force, e.g. a collision. Please take off from at, open

ground and protect the gimbal after powering up.

Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The

gimbal will recover when it dries out.

Pitch Pan

Gimbal Operation Modes

Three Gimbal operation modes are available. Switch between the different operation modes on the

Camera page of the DJI GO App. Note that your mobile device must be connected to the remote

controller for changes to take effect. Refer to the table below for details:

Roll

DJI GO App

This chapter describes the four main

GUI of the DJI GO app.

Safe to Fly (GPS)

P-GPS

H: D:

V.S

M/S M/S

H.S

4.22.3

39M210M

232M

AF/MF

1/320 4821 4K 24

ISO 100 EV 0F 0 LOG

DJI GO App

The DJI GO app is a new mobile app designed specically for the Inspire 1 Pro. Use this app to control

the gimbal, camera and other features of your ight system. The app also comes with Map, Store a User

Center, for conguring your aircraft and sharing your content with friends. It is recommended that you use

a tablet for the best experience.

Connect your Aircraft, Take to the Skies

iPad

Equipment Library Discorvery Me

Learn More>

Use AEB shoot to get more dynanic image

Enter Camera View

80%

INSPIRE 1

Camera

The Camera page contains a live HD video feed from the Inspire 1 Pro’s camera. You can also congure

various camera parameters from the Camera page.

[18]

[17]

[16]

[15]

[14]

[13]

[12]

[10][11]

[9]

[8]

[7][6][5]

[4]

[3][2][1]

INSPIRE 1 PRO User Manual

[1] Flight Mode

: The text next to this icon indicates the current ight mode.

Tap to congure the MC (Main Controller) Settings. These settings allow you to modify ight limits and

set the gain values.

[2] GPS Signal Strength

: This icon shows the current strength of GPS signals. Green bars indicate adequate GPS

strength.

[3] System Status

: This icon indicates the current aircraft system status and GPS signal strength.

[4] Battery Level Indicator

: The battery level indicator provides a dynamic display of the battery level. The colored

zones on the battery level indicator represent the power levels needed to carry out different functions.

[5] Remote Controller Signal

: This icon shows the strength of remote controller’s signal.

[6] HD Video Link Signal Strength

This icon shows the strength of the HD video downlink connection between the aircraft and

the remote controller.

[7] Battery Level

: This icon shows the current battery level.

Tap to view the battery information menu, set the various battery warning thresholds, and view the

battery warning history.

[8] General Settings

: Tap this icon to view the General Settings page. From this page, you can set ight parameters,

reset the camera, enable the quick view feature, adjust the gimbal roll value, and toggle the ight

route display.

[9] Camera Operation Bar

MENU: Photo Styles

Tap MENU -> -> Style to choose from the following styles:

1. Standard

A general-purpose style for most scenes.

2. Landscape

The camera will focus on as much of the scene as possible by using a large depth of eld.

3. Soft

Suitable for scenes with natural or soft colors.

INSPIRE 1 PRO User Manual

4. Custom

Sharpness: -3 to +3

Contrast: -3 to +3

Saturation: -3 to +3

MENU: White Balance

Tap MENU -> ->White Balance to choose from the following modes:

1. Auto

The camera adjusts the white balance automatically.

2. Sunny / Cloudy / Incandescent / Neon

Choose one of these modes if natural-looking colors cannot be achieved through photo styles.

3. Custom (2000K~10000K)

Set a value between 2000K and 10000K to compensate for a specic light source.

MENU: List of Settings

Photo

Shooting Modes Single shoot, Burst Mode, AEB(3/5 bracketed frames), Time-lapse

Image Format JPEG, DNG, JPEG+DNG

Image Size 4:3, 16:9

White Balance Auto, Sunny, Cloudy, Incandescent, Neon, Custom (2000K~10000K)

Style Standard, Landscape, Soft, Custom (Sharpness/Contrast/ Saturation)

Color LOG, None, Vivid, Black White, Art, Film, Beach, Dream, Classic, Nostalgia

Video

Video Size UHD:4K (4096×2160) 24/25p, 4K (3840×2160) 24/25/30p,

2.7K (2704×1520) 24/25/30p; FHD:1920×1080 24/25/30/48/50/60p

Video Format MOV, MP4

NTSC/ PAL PAL, NTSC

White Balance Auto, Sunny, Cloudy, Incandescent, Neon, Custom (2000K~10000K)

Style Standard, Landscape, Soft, Custom (Sharpness/Contrast/ Saturation)

Color LOG, None, Vivid, Black White, Art, Film, Beach, Dream, Classic, Nostalgia

General

Quick Preview Off, 1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, and 10s

Anti-Flicker Auto, 60Hz, and 50Hz

Show Grid Off, Grid Line, Grid + Diagonal, Center Point

File Index Mode Reset, Continuous

Others Show Histograms, Video Captions, Lens Profile, Reset Camera Settings,

Format SD Card

Altri manuali per Zenmuse X5

Indice

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente

dji Zenmuse X5 Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche