dji Cendence Manuale utente
Cendence
2017.08
V1.0
User Manual
2
©2017 DJI All Rights Reserved.
Using this manual
Legends
Warning Important Hints and Tips Reference
Watch the video tutorials
Please watch the tutorial video below to learn how to use CendenceTM correctly and
safely:
http://www.dji.com/cendence/info#video
Download the DJI GO 4 app
Be sure to use the DJI GOTM4apporotherappscompatiblewithDJIaircraftduringight.
Scan the QR code or visit
“https://m.dji.net/djigo4” to download the app.
Use mobile devices running Android v4.4 or iOS v9.0 or above.
*Forincreasedsafety,theightisrestrictedtoaheightof30manddistanceof50mwhennotconnectedorlogged
intotheappduringight,includingDJIGO4andallappscompatiblewithDJIaircraft.
Download the DJI Assistant 2
Download and install the ASSISTANTTM 2 before use.
http://www.dji.com/cendence/info#downloads
Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to
begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that
section.
Printing this Document
This document supports high resolution printing.
©2017 DJI All Rights Reserved.
3
Contents
Using this manual 2
Legends 2
Watch the video tutorials 2
Download the DJI GO 4 app 2
Download the DJI Assistant 2 2
Product Prole 5
Introduction 5
In the Box 5
Remote Controller Diagram 6
Preparing the Remote Controller 8
Mounting/Removing the Intelligent Battery 8
Charging the Battery 8
Mounting the Monitor to the Remote Controller 9
Linking the Remote Controller 10
Remote Controller Operations 10
Button Types 10
Turning the Remote Controller On and Off 10
Operating the Aircraft 12
Controlling the Gimbal 14
Operating the Camera 15
Adjusting Camera Settings 15
Customizable Buttons 16
Dual Remote Controller Mode 16
Using Accessories 18
Mounting the Patch Antenna 18
Mounting the Control Stick Covers 18
Appendix 19
Upgrading the Remote Controller Firmware 19
Specications 19
4
©2017 DJI All Rights Reserved.
Product Prole
Introduction
The CendenceTM remote controller features DJI’s LIGHTBRIDGETM technology for a maximum
transmissiondistanceofupto4.3mi(7km).*DualtransmissionfrequencysupportmakesHDvideo
downlink stable and reliable. In Dual Remote Controller mode, two remote controllers can control
the aircraft and camera separately and simultaneously. Dual Remote Controller mode even works
whenusersareupto328ft(100m)apart.
TheremotecontrollerworkswithaWB37intelligentbattery,whichcanbechargedviathecharging
port(in about2hoursand24minuteswith a180Wcharger)orwiththe WCH2 IntelligentBattery
ChargingHub(inabout1hour and11minutes).The maximumoperationtimeoftheremote
controller is approximately four hours without supplying power to a monitor and with the Dual
Remote Controller mode disabled.*
Cendencecanbeequippedwitha DJICrystalSkyTMmonitor(the7.85-inchmodelisusedas
exampleinthisuserguide),whichoffersanHDlivecameraviewwithitsbuilt-inDJIPilotapporDJI
GOTM4appforapreciseandresponsiveyingexperience.
Withvariouscustomizablebuttons,youcanadjustanumberofightcontroller,camera,andgimbal
parameterswithjustyourhands.TheCendencePatchAntennaalsoallowsforhigh-gainsignal
transmission and improved reception.
Theremotecontrollercanreachitsmaximumtransmissiondistance(FCC)inawideopen
areawithnoelectro-magneticinterferenceatanaltitudeofabout400feet(120meters).
Tocomplywithlocalregulations,the5.8GHzfrequencyisnotavailableinsomecountries
and regions.
Maximum run time is estimated without supplying power to a smart device or monitor.
OtherproductsreferredinthismanualcanbepurchasedseparatelyfromtheofcialDJI
Online Store.
In the Box
Cendence Remote Controller×1
WB37IntelligentBattery*×1
Cendence Monitor Mounting Bracket* ×1
Cendence Remote Controller Support Rig* ×1
Screwdriver ×1
Screws ×2
Cendence Control Stick Cover ×2
Cendence Control Stick Cover Mounting Key ×1
Remote Controller Strap ×1
* Connected to the remote controller.
Cendence User Guide
©2017 DJI All Rights Reserved.
5
1. Antennas
Relay aircraft control and video signal.
2. Monitor Mounting Bracket
Used to mount the DJI CrystalSky monitor.
3. Control Sticks
Control the orientation and movement of the
aircraft.
4. Strap Hood
5. Focus Adjustment Knob
Rotate to set the focal length.
6. Return-to-Home (RTH) Button
Press and hold to initiate Return to Home
(RTH).
7. Power Port
Connect to the Charger to charge the battery
of the remote controller.
8. EV Setting Button
Press and rotate the Camera Setting Dial to
set the EV.
9. Shutter Setting Button
Press and rotate the Camera Setting Dial to
set the shutter speed.
10. Aperture Setting Button
Press and rotate the Camera Setting Dial to
set the aperture.
11. ISO Setting Button
Press and rotate the Camera Setting Dial to
set the ISO.
12. Pause Button
Press once to exit TapFly, ActiveTrack, or
other Intelligent Flight Modes.
13. Power Button
Used to turn the Remote Controller on and
off.
14. Remote Controller Display
Shows information about the aircraft and
camera.
15. Camera Settings Dial
Works with the EV, Shutter, Aperture and
ISO Setting Buttons to adjust their values.
16. Customizable Button Settings Menu
Press to set Customizable Button
functions in the DJI GO 4 app.
17. Customizable Buttons (BA-BH)
Customizable through the DJI GO 4 app.
18. Customizable Buttons (C1-C4)
Customizable through the DJI GO 4 app.
19. Left Lever
Customizable through the DJI GO 4 app.
20. Right Lever
Customizable through the DJI GO 4 app.
1
2
34
5
6
9
8
7
11
10
13
12 14 16
15
17
19
18
18
20
21
22 23
24
25
26
27
28
29
30
17
31 3032 33 34
35
36
37
38
17
Remote Controller Diagram
1
2
34
5
6
9
8
7
11
10
13
12 14 16
15
17
19
18
18
20
21
22 23
24
25
26
27
28
29
30
17
31 3032 33 34
35
36
37
38
17
Cendence User Guide
6
©2017 DJI All Rights Reserved.
21. Battery Release Button
22. WB37 Intelligent Battery
23. Battery Level LEDs
Display the battery level of the Intelligent
Battery.
24. Battery Level Button
Press to show the battery level.
25. Remote Controller Support Rig
26. Handle Bar
27. Patch Antenna Mounting Holes
Used to mount the Cendence Patch Antenna.
28. Left Dial
Controls gimbal tilt.
29. Flight Mode Switch
SwitchbetweenP-mode,S-mode,and
A-mode.
30. USB Port
Connection to mobile device for DJI GO 4
appifusedathird-partymobiledevice.
31. HDMI A Port (for Video Output)
HDMI A Port is for video output.
32. CAN Bus Port
Used to connect external devices.
33. Micro USB Port
Usedtoupdatermware.
1
2
34
5
6
9
8
7
11
10
13
12 14 16
15
17
19
18
18
20
21
22 23
24
25
26
27
28
29
30
17
31 3032 33 34
35
36
37
38
17
34. SDI Port (for Video Output)
Used for video output.
35. Right Dial
Used to control gimbal pan.
36. Auto Focus Button
Press to focus automatically.
37. Record Button
Press to start recording video. Press again
to stop recording.
38. Shutter Button
Press to take a photo. Photos can also be
captured during video recording.
©2017 DJI All Rights Reserved.
7
Preparing the Remote Controller
Mounting/Removing the Intelligent Battery
Put the battery into the Battery Slot, then slide it to the end until you hear a click.
Press the Battery Release Button before removing the battery.
Press the Battery Level Button once to check the battery level.
Charging the Battery
Theremote controllerispoweredbyaWB37 intelligent battery,whichcanbechargedvia the
charging port or by the WCH2 Intelligent Battery Charging Hub.
Using the Charging Port
The INSPIRETM 2 charger is used as for example below.
Place the battery into the remote controller, and connect connector B of the battery power port, then
connectthebatterychargertoapoweroutlet(100-240V,50/60Hz).Whenchargingiscomplete,the
display on the remote controller will show 100%.
OK
Charging Time: 2 hours and 24 min
Using the Charging Hub
The Inspire 2 Charger and the WCH2 Intelligent Battery Charging Hub are used for example below.
Place the battery into the Charging Hub, and connect connector B of the battery charger to the
charginghub, thenconnectthebatterycharger toapoweroutlet(100-240V, 50/60Hz).The
ChargingHubwillintelligentlychargebatteriesinsequenceaccordingtobatterypowerlevelsfrom
high to low. The buzzer will begin beeping when charging is complete. Remove the battery or turn
off the Buzzer Switch to stop it.
B
B
A
Power Qutlet
100~240 V
(50Hz/60Hz)
Cendence User Guide
8
©2017 DJI All Rights Reserved.
UsingtheWCH2ChargingHub,chargingtimeisapproximately1hourand11minutes(foronebattery).
USBpowersupplyportcanbeusedtochargethemobiledeviceof5V/2A.
Refer to the WCH2 Charging Hub User Guide for more details.
Mounting the Monitor to the Remote Controller
Mounting the DJI CrystalSky Monitor
DJICrystalSky7.85inchisusedasexampleinthisguide.
Ensure that Part B is
unlocked. Install Part B
into Part A.
Lock the Mounting
Bracket.
Lock the Mounting
Bracket.
Use a coin to adjust
the tightness of the
pitch axis.
B
A
Mounting the Third Party Mobile Devices
Forother mobile devices (e.g.iPhones,iPads),theCendenceMobileDeviceHolder and an
appropriateUSBcablearerequired.
B
A
B
Unlock the Mounting Bracket and
mount the Mobile Device Holder.
Thecharginghubblinksgreenwhilechargingandturnssolidgreenwhenchargingisnished.
Power Qutlet
100~240 V
(50Hz/60Hz)
Attach your mobile device, then tighten the clamp to secure it. Connect your mobile device to the
remote controller with a USB cable. Plug one end of the cable into your mobile device, and the
other end into the USB port on the back of the remote controller.
©2017 DJI All Rights Reserved.
9
Remote Controller Operations
Button Types
Userscanusethepreconguredbuttonstocontroltheaircraftandthecameraandcanalsoassign
functions to the customizable buttons through the DJI GO 4 app. There are three types of button:
1. Preconguredbuttonsforaircraftcontrol,e.g.thePauseButton,RTHButton,etc.
2. Preconfigured buttons for camera control, e.g. the Shutter Button, Recording Button, Focus
Adjustment Knob, etc.
3. CustomizablebuttonsandknobsthatyoucansetthroughtheDJIGO4app.
Turning the Remote Controller On and Off
Follow the steps below to turn the remote controller on and off.
1. Press the power button once to check the current battery level. Charge the remote controller if
the battery is too low.
2. Next, press and hold the Power button to power on the remote controller.
3. Repeatstep2topowerofftheremotecontrollerafteryounishusingit.
Linking the Remote Controller
Linkingisonlyrequiredwhenusingfortheremotecontrollerforthersttime.Followthesestepsto
link a remote controller:
1. Power on the remote controller, connect to your mobile device, and launch DJI GO 4.
2. Power on the aircraft.
3. EntertheCameraViewandtaptheLinkingRemoteControllerbuttonshownbelow.
4. The DJI GO 4 app will display a countdown box, the remote controller will be ready to link, with
its display showing Connecting and a beeping sound being emitted.
Cendence User Guide
10
©2017 DJI All Rights Reserved.
5. LocatetheLinkingbuttonontheaircraftandpresstheLinkingbuttontostartlinking.Theremote
controller display shows the current status information. The master remote controller shows the
aircraft status, and the slave remote controller shows the camera settings.
If No Connection is shown after linking, repeat the above steps to try linking again.
Altri manuali per Cendence
1
Indice
Altri manuali dji Telecomando
dji
dji SPARK REMOTE CONTROLLER C2 Manuale utente
dji
dji FPV Remote Controller 2 Manuale utente
dji
dji OSMO ACTION Manuale utente
dji
dji SPARK REMOTE CONTROLLER C2 Manuale utente
dji
dji A3 Manuale utente
dji
dji FPV AIR UNIT Manuale utente
dji
dji FOCUS CP.ZM.000238.02 Manuale utente
dji
dji DT7 Manuale utente
dji
dji PVT581 Manuale utente
dji
dji A3 Manuale utente
