DNF Controls 2034CL-Q Manuale utente
12034CL-Q, 300 Clip Instant Access System, Quantel Protocol
12843 Foothill Blvd. Suite C
Sylmar, California 91342
V: 818.898.3380
F: 818.898.3360
sales@dnfcontrols.com
Model No. 2034CL-Q
(& 2034CL-Q-T)
300 CLIP INSTANT ACCESS SYSTEM
Quantel Protocol
User Manual
22034CL-Q, 300 Clip Instant Access System, Quantel Protocol
TABLE OF CONTENTS
1. REVISION HISTORY 3
2. SYSTEM DESCRIPTION 4
DEFINITIONS 4
3. SYSTEM INSTALLATION 5
A. SHOTBOX 5
B. ST300-S/SM, VTR/DDR CONTROLLER 5
4. VIDEO SERVER SETUP 6
5. LOAD ACLIP 6
6. VIEW THE CLIP ID OF THE CURRENTLY LOADED CLIP 6
7. LEARN ACLIP OR CLIP COMBINATION 7
A. LEARN ON THE SHOTBOX 7
B. LEARN ON THE ST300 7
8. RECALL ACLIP OR CLIP COMBINATION 8
A. RECALL ON THE SHOTBOX 8
B. RECALL ON THE ST300 8
9. RECUE THE CURRENTLY LOADED CLIP 8
10. LOOP CLIP 9
ADVANCED FEATURES . . . 10
11. CREATING ACLIP 10
12. VIEW SHOTBOX SHOTKEY ASSIGNMENTS 11
13. SHOTBOX SHOTKEY MAPS 11
14. SHOTBOX CONTROL SWITCHES 11
15. TRANSFERRING CUELIST 12
A. TRANSMIT CUE LIST FUNCTION 12
B. RECEIVE CUE LIST FUNCTION 13
REFERENCE . . . 14
16. SETUP MENU 14
17. FUNCTION TABLE 16
18. SPECIFICATIONS 17
A. ST300 17
B. ST420 (SHOTBOX) 18
19. TROUBLESHOOTING 20
ST420 TROUBLESHOOTING 20
20. KEY LAYOUT 21
21. DNF CONTROLS LIMITED WARRANTY 22
Manual Version........................…….........…............... 4.3 013004
Document ID.......................…...……....... 2034CL-Q User Manual
32034CL-Q, 300 Clip Instant Access System, Quantel Protocol
1. REVISION HISTORY
092403 Rev. 4.1 Company header information revised.
120403 Rev. 4.2 Added DNF Controls Limited Warranty.
013004 Rev. 4.3 Added Transferring Cue List section.
42034CL-Q, 300 Clip Instant Access System, Quantel Protocol
Getting Started . . .
2. SYSTEM DESCRIPTION
The 300 Clip Instant Access System consists of the ST300-SSM VTR Controller, STS420
Shotbox, and Shotlist Software.
Upon receipt of the Learn command, the ST300 saves the CLIP IDS of the currently loaded clips,
the current time of each clip, the VTRs they are loaded on and the current GANG mode into the
appropriate Cue Point.
SHOTLIST provides fast access to existing video clips stored on QUANTEL Video Servers. The
SHOTLIST contains up to 400 CLIP IDs, stored in non-volatile memory in the ST300.
Any clip in the SHOTLIST can be quickly loaded by simply entering the associated 3-digit
number of its location, then pressing [LOAD]. Press [PLAY] to play the clip. Press [RECUE]
to cue to the beginning of the clip.
DEFINITIONS
Throughout this document VTR, DDR, VDR & Video Server will be referred to collectively
as “Video Server.”
The ST300-S/SM as the ST300.
The ST420 SHOTBOX is referred to as “SHOTBOX.”
“SHOTKEY” refers to the 1-30 switches on the SHOTBOX.
Words surrounded by brackets, for example, [ENTER], are keys on the ST300 or the
SHOTBOX. [XXX] + [XXX] means hold the two keys down simultaneously.
52034CL-Q, 300 Clip Instant Access System, Quantel Protocol
3. SYSTEM INSTALLATION
a. SHOTBOX
1) Plug one end of a standard 9-pin, RS422 serial cable, into the
OUTPUT connector on the rear of the SHOTBOX. Plug the other end
of the cable into the AUX connector on the rear of the ST300.
2) Connect the Ault Model #SW300 POWER SUPPLY into the POWER
connector on the rear of the SHOTBOX. Plug the Power Supply into an outlet,
90 VAC – 240 VAC.
b. ST300-S/SM, VTR/DDR CONTROLLER
1) Plug one end of a 9-conductor, RS422 serial cable into the VTR 1 (2, 3 or 4)
connector on the rear of the ST300. Plug the other end of the cable into the
REMOTE connector on the Video Server.
2) Connect the supplied POWER SUPPLY, APX#4108, into the POWER
connector on the rear of the ST300. Plug the Power Supply into an outlet, 90
VAC – 240 VAC.
3) Check SETUP MENU prior to using the ST300 to confirm proper Record mode
and other User settable modes.
Installation is complete.
CONNECTION DIAGRAM
62034CL-Q, 300 Clip Instant Access System, Quantel Protocol
4. VIDEO SERVER SETUP
Refer to Quantel Operators Manual. Set serial ports to the following format:
Baud Rate – 9600
Parity – None
Data Bits – 8
Stop Bits – 1
5. LOAD A CLIP
a. Select a VTR by pressing VTR [1], VTR [2], VTR [3], or VTR [4].
b. Press [CLIP LIST] to view the list of CLIP IDs that are resident on the Video Server.
The CLIP LIST indicator will turn on.
c. Press [CREATE] to create and load a new clip.
(Creating a clip is described in the CREATING A CLIP section.)
OR
Turn the Wheel to view the existing CLIP IDs on the video server.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIPs. Backward scrolling is limited to the last 10 CLIP IDs
viewed.
OR
Manually enter a CLIP ID using the ST300 numeric keypad, or PC keyboard (if KBIO
option).
OR
Manually enter a Clip ID using the Qwerty keyboard on SHOTBOX.
d. Press [LOAD] to load the selected CLIP ID for playout.
If more than one Clip ID matches the entered/selected ID, the display will show “More
Than 1 Found.”
Using the wheel, scroll through the list of clips.
Select the desired clip, then press [LOAD].
e. Repeat steps a. thru d. to load clips on desired VTRs.
f. Set the GANG mode, if required.
6. VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
Press [SHIFT] + [LOAD]. The bottom line will show the name of the loaded clip.
72034CL-Q, 300 Clip Instant Access System, Quantel Protocol
7. LEARN A CLIP OR CLIP COMBINATION
a. LEARN ON THE SHOTBOX
1) Load a clip on the desired VTRs. (See Section 5, “LOAD A CLIP.”)
2) Press [LEARN]. The LEARN indicator will turn on.
3) Select the desired BANK and ShotKey.
4) Press [LEARN] to exit at anytime.
NOTE: The [LEARN] key toggles LEARN mode on/off.
The controller will: LEARN (save) the VTR Number (1,2,3,4), loaded CLIP ID and
current IN time to the selected Cue Point.
b. LEARN ON THE ST300
1) Load a clip on the desired VTRs. (See Section 5, “LOAD A CLIP.”)
2) Select the desired Cue Point by pressing [NEXT CUE], [LAST CUE] or by
manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
3) Press [SHIFT] + [MARK] to initiate the LEARN.
The display will show:
4) Press the VTR key desired: [1], [2], [3], [4].
5) Press [MARK] and the ST300 will:
LEARN (save) the VTR Number (1, 2, 3, 4), loaded CLIP ID and current
IN/OUT time to the selected Cue Point.
Press VTR:
MARK-Lrn ESC-Cancel
82034CL-Q, 300 Clip Instant Access System, Quantel Protocol
8. RECALL A CLIP OR CLIP COMBINATION
a. RECALL ON THE SHOTBOX
1) Select the desired Bank.
2) Press the desired shotkey.
The ST300 will automatically load the learned clips on the learned VTRs, cue
the clips to the Learned time, then set the Learned Gang Mode.
b. RECALL ON THE ST300
1) Select the desired Cue Point by pressing [NEXT CUE], [LAST CUE].
OR
By manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
2) Press [LOAD] on the ST300.
The ST300 will automatically load the Learned clips on the Learned VTRs, cue
the clips to the Learned time, then set the Learned GANG mode.
9. RECUE THE CURRENTLY LOADED CLIP
Press [RECUE]. If an IN Point is marked (the IN indicator is on), the clip will RECUE to the IN
Point.
If the IN point is not marked, the clip will RECUE to the start of the clip.
OR
Press [SHIFT] + [RECUE].
a. Enter the desired time to search to using the ST300’s numeric keypad.
b. Press [ENTER] to search to the entered time.
OR
Press [ESC] to exit without searching.
92034CL-Q, 300 Clip Instant Access System, Quantel Protocol
10. LOOP CLIP
a. LOAD a clip from CLIPLIST or RECALL a learned clip.
b. Press [LOOP ENABLE]. The LOOP ENABLE indicator will turn on.
Press [PLAY] to loop a loaded clip. The second line of the display will show “Looping
clip . . .”
OR
Press [SHIFT] + [PLAY]. The clip will be reloaded and start playing in a Loop.
c. Press [STOP] to stop the loop play. NOTE: The ST300 will NOT respond to any other
keys while a clip is looping. Only [STOP] is recognized in this mode.
NOTES: The LOOP function can be performed on a SINGLE CHANNEL ONLY. Loop
will automatically be disabled if the Channel becomes part of a gang.
If the clip ID ends with an asterisk (“*”), it will automatically loop when either [LOOP
ENABLE] or [PLAY] is pressed.
10 2034CL-Q, 300 Clip Instant Access System, Quantel Protocol
Advanced Features . . .
11. CREATING A CLIP
a. Set record mode using [MENU].
b. Press [SHIFT] + [RECORD] to set clip length.
Prompt will show: “Enter REC Duration.”
Manually enter desired clip duration using numeric keypad on ST300.
Press [ENTER] to save or [ESC] to exit without saving.
c. Press [CLIP LIST]. Prompt will show: “CREATE NEW CLIP”
“Press LOAD to create”
Press [LOAD].
d. Prompt will show “NEW CLIP:”
Manually enter new clip name using numeric keypad or PC keyboard.
OR
Manually enter an ID with a maximum of 8 characters using the SHOTBOX’s Qwerty.
NOTE: For numbers on the SHOTBOX keyboard, use bank keys 0-9.
e. Press [ENTER] to create clip or [ESC] to exit without creating clip.
f. If successfully created, prompt will show: “Ready to Record”
“Press REC or STOP”
Press [REC] to record.
Press [STOP] to pause record.
Press [STOP] again to terminate record.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali DNF Controls Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
