Dormakaba Digital cylinder Manuale utente

dormakaba digital cylinder

1220013692 - 11/2017

Technical Manual

dormakaba Schweiz AG

Mühlebühlstrasse 23

8620 Wetzikon

Switzerland

T: +41 (0)44 931 61 11

www.dormakaba.com

dormakaba Austria GmbH

Ulrich-Bremi-Straße 2

3130 Herzogenburg

Austria

T: +43 (0)2782 808 0

www.dormakaba.com

No part of this document may be reproduced or used in any form or by any means without prior written permis-

sion of dormakaba Schweiz AG.

All names and logos of third-party products and services are the property of their respective owners.

Subject to technical changes.

1220013692 - 11/2017

Table of contentsTechnical Manual

31220013692 - 11/2017 dormakaba digital cylinder

Table of contents

1 About this document 5

1.1 Validity 5

1.2 Target group 5

1.3 Contents and purpose 5

1.4 Supplementary documentation 6

1.5 Digital cylinder abbreviations 6

1.6 Hazard categories 6

1.7 Notes 7

1.8 Symbols 7

2 Basic safety instructions 8

2.1 Proper use 8

2.2 Product changes 8

2.3 Use in emergency exit or panic door locks 8

2.4 Areas of use 9

2.5 ESD protective measures 10

2.6 Handling of lithium batteries 10

3 Product description 11

3.1 Overview 11

3.1.1 Structure 11

3.2 Scope of delivery 11

3.2.1 Also for dual digital cylinder 11

3.3 Accessories 11

3.4 Technical data 12

3.4.1 Dimensions 13

3.5 Conformity 16

4 Installation 17

4.1 Requirements 17

4.1.1 Door components 17

4.1.2 Tools required 18

4.2 Installation versions 19

4.2.1 Installation version A 20

4.2.2 Installation version B 22

4.2.3 Function check on anti-panic digital cylinder 24

5 Programming 25

5.1 Initial programming of MRD components 25

5.2 Initial programming of LEGIC® and MIFARE components 25

5.3 Master media 25

5.4 User media 25

5.5 Program structures 26

5.6 A/B and B structures 26

5.7 Programming user media with B masters 27

5.8 Deleting individual user media 28

5.9 Deleting individual B masters 29

5.10 Deleting all user media 30

5.11 INI reset with master media for whitelist and CardLink™ 31

6 Operation 33

6.1 Operating the digital cylinder 33

6.2 Opening with user media 33

Table of contents Technical Manual

4 1220013692 - 11/2017dormakaba digital cylinder

7 Maintenance 34

7.1 Maintenance table 34

7.2 Maintenance of escape doors 34

7.3 Cleaning 35

8 Service 36

8.1 Serial numbers 36

8.2 Replacing the battery 36

8.3 Replace e-module 38

8.4 Disassembling the inner door knob 39

8.4.1 'Click' door knob 39

8.4.2 'Small' inner knob 39

8.5 Configuration and traceback 39

8.6 Reset (INI reset) 39

8.6.1 Reset with master media 40

8.6.2 Reset using programmer 1460 40

8.6.3 Reset using tweezers 40

8.7 Emergency power supply 40

9 Troubleshooting 41

9.1 Error analysis 41

9.2 Error analysis for battery life 43

10 Appendix 44

10.1 Summary of various factors influencing the battery operation 44

10.2 Recommendations for battery operation 44

About this documentTechnical Manual

51220013692 - 11/2017 dormakaba digital cylinder

1 About this document

This section contains information for the proper use of this document.

1.1 Validity

This document describes the product:

Product designation: dormakaba digital cylinder

Types: 143X dormakaba Digital cylinder with Euro profile (17mm)

153X dormakaba Digital cylinder with round profile (22mm)

Article numbers and vari-

ants:

Euro profile cylinder 1435 Standard

1434 Half

1437 Anti-panic

1439 Dual

1431 Asymmetrical

1433 Half with turning range

Round profile cylinder 1535 Standard

1534 Half

1537 Anti-panic

1539 Dual

1531 Asymmetrical

1533 Half with turning range

All versions are available with wireless functionality.

With the exception of the asymmetrical version, all components

are available as ‘protected’ variants (with high anti-drill protec-

tion).

1.2 Target group

This document is intended for specialist personnel only.

The descriptions are tailored to specialist personnel trained by the manufacturer. The descrip-

tions are no replacement for product training.

Service personnel are persons who have the appropriate technical training and experience re-

quired for them to be aware of the risks that could arise for themselves or others when carry-

ing out these activities and to minimise these risks for themselves and others. It is the re-

sponsibility of the service personnel to ensure that the conditions stated by the manufacturer

and the applicable regulations and standards are complied with when carrying out these

activities.

1.3 Contents and purpose

The contents of these instructions are limited to the installation, operation, maintenance and

servicing of the product.

About this document Technical Manual

6 1220013692 - 11/2017dormakaba digital cylinder

1.4 Supplementary documentation

The following documents are available from the sales partners:

• Programmer 1460 technical manual

• Operating manual for programmer 1364

• Wireless operation: Wireless planning guideline

• Documentation for the system software used

1.5 Digital cylinder abbreviations

Short designation Product designation

Digital cylinder dormakaba digital cylinder

Programmer Programmer 1460

1.6 Hazard categories

Instructions with information on what to do and not to do to prevent injury and material

damage are denoted specially.

Please follow all hazard instructions. These are intended to help prevent accidents and pre-

vent damage.

These instructions are divided into the following categories:

DANGER

High risk

Denotes an immediate danger that could lead to serious injury or death.

WARNING

Medium risk

Denotes a potentially dangerous situation that could lead to serious injury or death.

CAUTION

Low risk

Denotes a potentially dangerous situation that could lead to minor injury.

NOTICE

Important information on the correct use of the product.

Failure to comply with these instructions could lead to malfunctions. The product and/or ob-

jects in the local vicinity could be damaged.

About this documentTechnical Manual

71220013692 - 11/2017 dormakaba digital cylinder

1.7 Notes

Information is denoted by this symbol.

Tips on using the product are useful pieces of information.

They help to make best use of the product and its functions.

1.8 Symbols

Symbols with the following meanings are used for hazards (depending on hazard source.)

General hazard Hazard from electric shock

Risk of explosion Risk to electronic components from

electrostatic discharge

Basic safety instructions Technical Manual

8 1220013692 - 11/2017dormakaba digital cylinder

2 Basic safety instructions

This product has been built to state-of-the-art standards and in line with established safety

regulations. However, hazards for persons and property may arise when handling the product.

Read and observe the following safety instructions before using the product.

2.1 Proper use

This product has been designed exclusively for use as set out in the chapter Product Descrip-

tion. Any other use will be deemed improper use. The manufacturer accepts no liability for any

resulting damage. The user/operator bears sole responsibility for the risk.

2.2 Product changes

NOTICE

No changes should be made to the product, unless in accordance with changes described in

the instructions.

2.3 Use in emergency exit or panic door locks

WARNING

Risk of personal injury or death.

• Improper use or incorrectly installed digital cylinders can lead to emergency exit locks or

panic door locks and doors not opening.

• The use of a digital cylinder must be checked carefully before using it in locks with a panic

function.

• Before installing the digital cylinder in an escape door, a check must be carried out to en-

sure that the function of the lever handle or the panic push bar is not obstructed by the

inside knob.

• The use of a digital cylinder in emergency exit locks in accordance with EN179 or in panic

door locks in accordance with EN1125 is documented in the lock manufacturers' perform-

ance declarations. If the digital cylinder is not listed in the performance declarations or

certificates from the lock manufacturer or the lock does not comply with these standards,

an EC conformity inspection of the lock, digital cylinder, fitting and assembly accessories

as one unit must be carried out.

Basic safety instructionsTechnical Manual

91220013692 - 11/2017 dormakaba digital cylinder

2.4 Areas of use

IP56

When used outdoors, the cylinder must be protected against sustained rainfall using a

weather guard.

NOTICE

Freezing liquids can disrupt the function, resulting in doors not opening. No water, therefore,

should get into the cylinder. When used externally, the cylinder must be protected against

sustained rainfall using a weather guard.

When used in fire protection doors, escape routes or rescue routes, the locally applicable

guidelines and building regulations must be observed.

NOTICE

Doors at risk of forced entry

• The following points must be observed for certification as per VdS Class B: On doors at

risk of forced entry, the 'Protected' version of the digital cylinder must be protected with

a VdS-recognised burglary-resistant Class B or C doorplate. These doorplates correspond

to DIN 18 257 Class ES 2 or ES 3 and EN1906 Class 3 or 4. The cylinder must protrude no

more than 3 mm beyond the doorplate.

• The user media (keys, badges, etc.) must always be kept safe to ensure only authorised

personnel may gain access. If identification media are lost, the authorisation data must

be blocked and deleted from all cylinders immediately.

NOTICE

Wrong type of lock

The asymmetrical digital cylinder is not permitted to be used in some lock types.

Please refer to the lock manufacturer’s instructions.

Basic safety instructions Technical Manual

10 1220013692 - 11/2017dormakaba digital cylinder

2.5 ESD protective measures

NOTICE

Danger of damage to electronic components from electrostatic discharge.

If electronic printed circuit boards and components are handled incorrectly, damage may oc-

cur which leads to their complete breakdown or sporadic faults.

• When installing and repairing the product, the general ESD protective measures are to be

observed.

• Before starting service or maintenance work on the product, e.g. changing the battery,

briefly touch the door handle. This will safely and effectively conduct charges away from

your body.

• When handling electronic components, wear the ESD wrist strap. Connect the end of the

strap to an ESD socket or an unpainted, earthed metal component. This will safely and ef-

fectively conduct charges away from your body.

• Only handle the edges of printed circuit boards. Do not touch printed circuit boards or

connecting plugs.

• Put removed components on an anti-static surface or in an anti-static shielding container.

• Avoid contact between printed circuit boards and clothing. The wrist strap only protects

the printed circuit boards from static electricity on the body. Damage can still occur due

to static electricity on clothing.

• Only transport and ship removed modules in ESD-shielding, conductive protective con-

tainers.

2.6 Handling of lithium batteries

NOTICE

Lithium batteries can explode or burst explosively.

Improper handling of lithium batteries can lead to fires and explosions.

• Only replace lithium batteries with batteries of the same type.

• Do not open, drill through or squash lithium batteries.

• Do not burn lithium batteries or expose them to high temperatures.

• Do not short circuit lithium batteries.

• Do not recharge lithium batteries.

Indice

Altri manuali Dormakaba Serratura

Dormakaba

Dormakaba RCI 3513-DM Manuale utente

Dormakaba

Dormakaba BEST Wi-Q 45HQ Manuale utente

Dormakaba

Dormakaba 5715 Istruzioni operative e di manutenzione

Dormakaba

Dormakaba SVI 5000 Manuale di formazione

Dormakaba

Dormakaba LA GARD ComboGard Pro 39E Manuale

Dormakaba

Dormakaba T900 Manuale utente

Dormakaba

Dormakaba LA GARD ComboGard Pro 39E Manuale

Dormakaba

Dormakaba M Series Manuale utente

Dormakaba

Dormakaba Classic Manuale utente

Dormakaba

Dormakaba YD30 Series Manuale

Dormakaba

Dormakaba SVA 6000 Manuale di formazione

Dormakaba

Dormakaba Cobalt Single Manuale utente

Dormakaba

Dormakaba SVI Series Manuale utente

Dormakaba

Dormakaba GL10 Manuale utente

Dormakaba

Dormakaba SafeRoute-System Mini Manuale utente

Dormakaba

Dormakaba 2725-K6 Manuale utente

Dormakaba

Dormakaba Kaba Star Manuale utente

Dormakaba

Dormakaba YD30D Manuale

Dormakaba

Dormakaba 8H Series Manuale utente

Dormakaba

Dormakaba 79 Series Istruzioni per il montaggio

Dormakaba

Dormakaba RCI DE8310 Manuale utente

Dormakaba

Dormakaba Axessor CIT Manuale utente

Dormakaba

Dormakaba AUDITCON 2 SERIES Manuale utente

Dormakaba

Dormakaba LA GARD 700 Series Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente

Dormakaba digital cylinder Manuale utente

Manuali Serratura popolari di altre marche