Doro X50 Manuale utente

X50

Exclusive speakerphone

with Caller Display

User guide

DORO X50 LIST OF CONTENTS

DORO X50

User guide

LIST OF CONTENTS

Installation .................. 1Memory full ..............16

Functions ..................... 1Battery warning ...........16

Parts list/assembly .............. 3Dial Back function .........17

Battery ....................... 4

Ring switch/Line adapt .......... 5VIP-function .............18

Loudspeaker function ........... 6Explanation of VIP-function . 18

Connecting a headset ............ 6To Store VIP-number .......18

........................Additional

VIP functions ..................18

Telephone ................... 7

Display ....................... 7Common faults ...........19

Set date and time ............... 8If the phone doesn't work ....19

Call timer ..................... 8No Caller Display

To make a call ................. 9Information ...............19

Last number redial ..............10 Fault Finding ..............19

Volume control ................11

Mute .........................11 Other ...................20

Direct memory .................11 Additional Network Services . 20

Pause function .................12 Warning .................20

Group listening ................13 Cleaning .................21

REN ....................21

Caller Display ............... 14 Warranty .................21

Explanation of Caller Display .... 14

Indicating new numbers ......... 14 Technical data ............22

To view new call numbers ....... 15

Delete Caller Display numbers ... 16

INSTALLATION DORO X50

FUNCTIONS

1Handset 9Handset cord

2Mute button 10 Hook switch

3Loudspeaker 11 Microphone (in front)

4Display 12 Buttons 0-9, *, #.

5Socket for line cord 13 Loudspeaker indicator.

6One-touch dialling buttons M1 - M10 14 Switches (on right side), see

7Socket for headset next page.

8Function buttons, see next page. 15 Handset socket

DORO X50 INSTALLATION

Explanation of function buttons:

UP arrow for Caller Display numbers

DOWN arrow for Caller Display numbers

CALL-UP button for Caller Display

CLEAR button for Caller Display

Programming and storing of direct memory

Pause button

Recall Button

Last number REDIAL button

Loudspeaker/headset button

On the right hand side of the telephone there are 4 switches:

Volume control for Volume control for handset

loudspeaker. and headset (3 steps).

Select Loudspeaker Adjustable ringer

or headset. (Off/Low/High).

INSTALLATION DORO X50

ASSEMBLY INSTRUCTIONS

PARTS LIST

1 - X50 Telephone

1 - Telephone handset

1 - Line cord and adaptor plug

3 - 1.5volt AAA batteries.

ASSEMBLY

PPlug the line cord into the telephone (5 on the diagram on page1) by inserting the

plug into the socket until you hear a click.

PThe plug on the other end of the line cord is to connect to the telephone network.

PPlug the handset into the telephone (15 on the diagram on page 1) again listen for

the click.

Outlet for headset Outlet for line cord

PTo remove either of the plugs depress the plastic tab on the plug and withdraw.

To connect the headset, see page 6.

Don´t position the telephone in direct sunlight or strong heat. The rubber feet on the base

of the telephone can leave marks on a sensitive surface.

IMPORTANT! This telephone uses a magnetic switch for on and off hook

activation. Please be aware that small pins and staples may attach to the handset

in the mouthpiece area.

DORO X50 INSTALLATION

Telephone base:

Screw

Battery cover Socket for handset cord

BATTERY

The Caller Display and memory functions need 3 x 1.5 volt AAA batteries to operate. The

normal life of the battery is approximately one year.

The battery is also used to power the time and date so when the battery low indicator

shows in the display, change the batteries immediately.

To change the batteries do the following:

PRemove the line cord before you change the battery.

PTo install the new batteries, unscrew the battery cover and remove the old batteries.

PWait one minute for the Caller Display to reset correctly, then insert the new

batteries in the battery compartment. OBSERVE CORRECT POLARITY.

NOTE! Batteries must be installed for correct operation of the display and the

handsfree speakerphone.

INSTALLATION DORO X50

RING SWITCH

The ring signal is controlled by a 3 position switch on the side of the telephone,

OFF/LOW/HIGH.

In position the ringing signal is switched off. The LOW and HI positions set the ring

loudness. On the base of the telephone is a set of three switches, the top switch will

change the tone of the ring signal (see below)

The switch has 3 positions.

LINE ADAPT SWITCH

On the base of the telephone is a switch used to adapt the telephone for use either as a

normal telephone, or for use on an extension of a PBX. The switch has two positions

the NORM position is used for a connection to the telephone network and the -5db

positon when used as a PBX extension.

DORO X50 INSTALLATION

LOUDSPEAKER FUNCTION

When you install the phone for the first time, or use the phone after a long period of time

or if the phone has been disconnected, you may need to "load up" the phone for the

loudspeaker to work. You do this by lifting the handset for 2-3 seconds.

CONNECTING A HEADSET

Aheadset can be connected to the socket on the telephones base, near the line connector

(7 on the diagram on page 1). Operate the switch on the side of the telephone to select the

headset function, and use the loudspeaker/headset button to get dial tone or hang

up.

To see how to use the headset to make a call see page 10.

Loudspeaker function:

Headset function:

NOTE!

We recommended that you use a headset that is suitable for DORO X50. Headsets

are obtainable in many retail stores and at varying prices.Your local retailer can help

you choose a headset that is suitable.

Headsets can have different types of connector and wiring configuration and may

damage your headset and/or telephone. We suggest you consult your retailer for the

best advice concerning the type of headset. Faults caused by incorrect wiring or

incompatibility are not covered under Warranty.

TELEPHONE DORO X50

DISPLAY

The display (4 on the diagram on page 1) has 3 lines of alphanumeric characters on which

information is displayed.

The top line shows the calling name, mobile, payphone etc. The second line shows the

time, date, number of memories, battery indicator, new calls received and VIP - call

indicator. The third line shows the Caller Display number and call duration alternately.

The new call received indication (LED) is off until a new call has been received.

(additional information about the indicator is on page 15).

New Message Indicator

for incoming and VIP calls

Calling Name Date Caller Display Memory

Time Low battery

indicator

Phone number

DORO X50 TELEPHONE

SET DATE AND TIME

To set the correct DATE and TIME on the display do the following:

PPress the programming button, for 2 seconds, then release the button.

The hours in the Time display will flash.

PPress the UP or the DOWN arrow to set the correct hour. Press

button to store.

PThe minutes on the display will now flash. Press the UP or DOWN arrow

to set the correct minute. Press button to store.

PThe days on the display now flash. Press the UP or DOWN arrow

to set the correct day. Press button to store.

PThe month on the display now flashes. Press the UP or DOWN

arrow to set the correct month. Press button to store.

PThe Installation is complete and the telephone is ready to use and is on standby.

CALL TIMER

Outgoing Calls

The Telephone has a call timer function that will show the length of a call on the display.

The timer will start a few seconds after you have dialed the number.

In the example, the timer shows the call has been going for 17 minutes and 24 seconds

Incoming calls

On an incoming call, the timer will show the elapsed time after the call has finished.

Indice

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente

Ericsson

Ericsson Dialog 3213 Manuale utente