DropEffect XG Hotend Manuale utente

Assembly Instruction

Please read and keep this manual carefully

before using our products properly

Hotend

Dear customer, firstly thank you for purchasing

XG Hotend from DorpEect.

www.dropeect.com 01

Product Appearance

www.dropeect.com 02

XG Hotend Parts

Groove Mount CR Mount

Copper Plated Nozzle

When you open the package,

you will find the following components.

www.dropeect.com 03

Parts & Accessories

H6.0 Open Spanner

Name Quantity

No.

1 1

H1.5 Hex Key

H2.0 Hex Key

Fans Extension wire -5cm

Thermistor Extension wire -5cm

Heating ring Extension wire -5cm

Fans Extension wire -5cm

Thermistor Extension wire -5cm

Hexagon countersunk screw M3*8

M2.0*6.0 screw

M2.0*4.0 titanium alloy screw

Thermal Grease（0.5g）

www.dropeect.com 04

Assembly Steps

Step 1

Mount the thermistor to the heatblock through the

threaded hole of M4.

Step 2

Fix the heatbreak to the heatblock with H1.5 Hex Key through 3 M2*4

titanium alloy screws. At the same time, coat the external thread of the

throat evenly with thermal grease.

www.dropeect.com 05

Step 3

Put the heatbreak fixing seat into the threaded end of the heatbreak

through the middle hole, the V slot of the heatbreak fixing seat faces

the screw, and the side plane of the heatbreak fixing seat faces the

thermistor direction. Then screw the heatsink into the thread of the

heatbreak M4 and lock it.

www.dropeect.com 06

Step 4

Use the H1.5 hex key to connect the heat dissipation frame to the

heatbreak fixing seat with two M2*6 screws.

Step 5

Use the H2.0 hex key to connect the 2510 fan to the heat dissipation

frame with two M2.5*14 screws.

www.dropeect.com 07

Step 6

Put the silicone protective sleeve on the heatblock.

Step 7

Connection of the mount: Use the H1.5 hex key to loosen the two

M2*6 screws connecting the heat dissipation frame and the

heatbreak fixing seat, and remove the heat dissipation frame,

which can be connected with the following two dierent mounts:

www.dropeect.com 08

Step 7-1

With H1.5 hex key, use 4 M2*6 screws to connect the heat

dissipation frame with the mount - Groove Mount.

Step 7-2

Or with H1.5 hex key, use 2 M2*6 screws to connect the heat

dissipation frame with the mount - CR Mount.

123

Step 8

Install the nozzle: Heat the heating Hotend to 285 °C without

filaments, use the H6 open spanner to tighten the nozzle with a

torque of about 2.5 NM (see nozzle hot tightening assembly process

for more details).

www.dropeect.com 09

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente