DT Research DT398 Istruzioni per il montaggio

DT398

ENGLISH 1

DT398

BASIC OPERATION GUIDE

INTRODUCTION

Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT398.

Featuring an IP65-rated, slim yet robust enclosure, the two-pound DT398 with 9.7” TFT display is

performance and power savings. An external battery expansion option provides approximately 3-4

hours of additional battery operation for up to eight hours of mobile usage.

The DT398 is available with Windows® Embedded Standard 7, Windows® 7 Pro or Linux operating

systems. Each software operating system features web browser, client/server computing software,

media player, accessories, and applications support.

PACKAGE CONTENTS

One DT398 with Internal Battery Pack, Stylus and Bumpers

AC-DC Power Adapter with Power Cord

Basic Operation Guide

Handstrap

Major options, depending on configuration:

Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports

External Battery Pack and Battery Charger Kit

Vehicle/ Wall Mount Cradle

DT398

ENGLISH 2

The DT398

Input/ Output Ports

USB Port

Headphone Jack

DC Power Input

Full Slot Smart Card Reader

SD Slot

Button Functions

BUTTON

ACTION



Power on,

Push/release typically enters Standby

mode, or Push/release exits Standby mode

or restarts device (software dependent)

Push and hold (over 4 seconds) invokes

hardware shutdown



Programmable,

As scanner trigger when equipped with

the scanner module



Programmable

DT398

ENGLISH 3

Power/Battery LED Status:

Blue indicates the battery is 25% to 100% charged

Blinking blue indicates the battery is charging

Orange indicates that the battery is between 11% to 25%

Blinking orange indicates that the battery is below 10%

Blinking blue and orange alternately indicates the battery is being warmed up.

Do not unplug the AC/DC adapter.

Precautions

Always exercise care when operating and handling the DT398.

Do NOT apply excessive pressure to the display screen.

We recommend using the Stylus provided to keep the screen clean.

Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT398

should face away from direct light to reduce glare.

If the AC-DC power adapter is used to recharge or power the device, do NOT use any AC-DC adapter other

than the one provided with the device or acquired from the manufacturer or its partners.

In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the DT398

and disconnect all power sources. Report the problem to your device provider immediately.

Never attempt to disassemble the DT398, as this will void the warranty.

The DT398 internal battery is designed for wide temperature usage. Please do not use it for other tablet

models.

(The wide temperature design is not applicable for external batteries.)

THE DT398

Basic Features

The DT398 tablet integrates a bright and responsive touch display, 1 USB port, and embedded networking

elements such as 3G. The DT398 is complemented by a suite of accessories, including battery expansion,

docking cradles, and wall/ vehicle mount cradles, for a comprehensive user experience.

DT398

ENGLISH 4

OPERATION

Internal Battery

Warning!

The Internal battery pack should only be replaced by an authorized DT Research service representative. Please

contact your product and/or service provider for internal battery replacement service.

Powering ON and OFF

To activate the DT398, push and quickly release the Power Button. The display will come on in a few seconds.

To put the DT398 in Standby mode, push and quickly release the Power Button. To turn the DT398 off for

extended storage, power off the device safely using any software function that “shuts down computer” provided

in the software operating system.

NOTE:

The battery packs shipped with your device may be low in power—please use the AC-DC adapter

with the DT398 when setting up the device for the first time to fully charge the internal battery pack.

You may charge the external battery pack with it attached to the DT398, or with the optional external

battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If

plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the

battery pack(s) may have been drained substantially. Try unplugging/ replugging the AC-DC adapter

to the DT398 a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the device in “Standby”

mode while not in use. Pushing briefly on the same button will wake up the system within seconds.

NOTE:

Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the device—this form of

hardware shutdown is intended to be a means of recovery from device lockups, and not as normal

operation.

DT398

ENGLISH 5

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a

launch sequence of several seconds.

Configuring the Mobile Tablet

The device may be configured using the utilities and methods dictated by the software operating system. The

DT398 should be configurable for various properties such as user profiles, network features, and several system

elements.

Calibration

The touch display for the DT398 is calibrated before shipping. In the event that the calibration has been modified

or is unsatisfactory, the respective calibration routines (e.g., PenMount (PM) to calibrate the touch interface may

be used. Such applications are typically executed through touch input via Stylus or through mouse click via a

USB mouse.

Brightness Control

To control the screen brightness, launch the System Utility. The System screen will display a Brightness control

section with up and down arrows that can be activated with the stylus.

Battery and Power Management

The DT398 is equipped with an internal 1880mAh Li-Ion battery pack that is capable of supporting approximately

3 - 4 hours of continuous operation. With the internal battery and an external battery pack that clips

(hot-pluggable) onto the back of the device, the maximum period of continuous operation will be approximately 6

- 8 hours. The period between battery recharges can be significantly lengthened by putting the device into

Standby mode through the Power Button (see Buttons Function Table) whenever the device is not in use.

Depending on the operating software, the DT398 may also be configured to enter various power-saving modes

via the Power Button or through timed entry.

DT398

ENGLISH 6

USING THE Mobile Tablet

Peripherals Support

Through its USB port, the DT398 supports a wide range of USB-based peripherals. These peripherals are

applicable for software installation, applications storage, data storage, docking or software recovery and update.

The DT398 is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount Cradle for support,

pass-through charging, and connection to a range of USB peripherals, including keyboard and mouse. The

Cradles offer the following interfaces: a DC-in port for the AC-DC adapter, an Ethernet port, a VGA output and

USB ports. Always seat the DT398 securely onto the cradle. The cradle must be powered by the AC-DC adapter

for the Ethernet and USB ports to function. The battery packs on the DT398 may be recharged by connecting the

AC-DC adapter directly to the DC-in port on the DT398 or through the DC-in port on the Cradle while the DT398

is docked.

For More Support

Users can download the Software Utility and Modules Operation Guides from the DT Research website.

If the DT398 comes with a 3G module, please contact your product and/or service provider for the SIM Card Slot

Location and Insertion Guide.

DT398

ENGLISH 7

SPECIFICATIONS

System

DT398

CPU

Intel® Atom™ Dual Core, 1.1GHz

RAM

4GB

Storage

8GB to 256GB

Operating System

Microsoft® Windows® Embedded Standard 7, Windows® 7 Professional, or Linux

Display

8.4” LED-backlight screen with capacitive touch

Display Resolution

800 x 600 (SVGA)

Trusted Platform Module

Yes, TPM 1.2 support

Fan

Fanless

Control Switch and Buttons

1 power button and 1 trigger button

Indicator

1 power/ battery status LED

Speaker

Built-in speaker

Network Interface

WWAN/ GPS

3G module with GPS positioning and navigation (optional)

I/O Ports

USB Port

Headphone-out

DC-in

SD Slot

Yes, support 64GB

Mechanical and Environmental

AC/DC Adapter

Input: 100 –240V AC; Output: 19V DC, 6.31A

Battery Pack

Internal 14.8V, 1880mAh/ Optional: External 14.8V, 1880mAh

Enclosure

ABS + PC plastics and magnesium-aluminum alloy

Protective Bumpers

Rubber with handstrap

Dimensions (H x W x D)

8.9 x 10.8 x 1.4 in/ 227 x 275 x 35 mm

Weight

3.08 lbs/ 1.4 kg

Regulatory

FCC Class B, RoHS compliant

Temperature

Operation: 32°F to 104°F (0°C to 40°C);

Upgrade option: -4°F to 122°F (-20°C to 50°C)

Storage: -4°F to 140°F (-20°C to 60°C)

Humidity

0% –90% non-condensing

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com

DT Research is a registered trademark of DT Research, Inc.

BOG020713DT365CTMDENG

Indice

Altri manuali DT Research Tavoletta

DT Research

DT Research DT300Q01 Istruzioni per il montaggio

DT Research

DT Research 301SY Istruzioni per il montaggio

DT Research

DT Research DT311T Istruzioni per il montaggio

DT Research

DT Research DT362GL Istruzioni per il montaggio

DT Research

DT Research DT381RP Istruzioni per il montaggio

DT Research

DT Research DT301X-TR Istruzioni per il montaggio

DT Research

DT Research DT313SC-MD Istruzioni per il montaggio

DT Research

DT Research DT380CR Istruzioni per il montaggio

DT Research

DT Research WebDT 312 Manuale utente

DT Research

DT Research DT311C Istruzioni per il montaggio

DT Research

DT Research 340Q Istruzioni per il montaggio

DT Research

DT Research 313Y/MQ Istruzioni per il montaggio

DT Research

DT Research DT340T Istruzioni per il montaggio

DT Research

DT Research DT311NV Manuale utente

DT Research

DT Research DT302P Istruzioni per il montaggio

DT Research

DT Research DT372 Istruzioni per il montaggio

DT Research

DT Research DT361DM Istruzioni per il montaggio

DT Research

DT Research DT311YR Istruzioni per il montaggio

DT Research

DT Research DT395BT Istruzioni per il montaggio

DT Research

DT Research 373T/MD Istruzioni per il montaggio

DT Research

DT Research DT313T Istruzioni per il montaggio

DT Research

DT Research 311Q Istruzioni per il montaggio

DT Research

DT Research DT307SC Istruzioni per il montaggio

DT Research

DT Research DT301Y Istruzioni per il montaggio

Manuali Tavoletta popolari di altre marche

Laser

Laser MID-1060 Guida utente

MUNBYN

MUNBYN IRT09J Guida rapida

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manuale utente

Dell

Dell Latitude ST Manuale del proprietario

Lenovo

Lenovo IdeaTab S6000L Manuale del proprietario

Venturer

Venturer WT9L11 Manuale utente

EDUGEAR

EDUGEAR UnoBook Manuale utente

Philips

Philips PI3210G/58 Manuale utente

ADLINK Technology

ADLINK Technology IMT-BT Manuale utente

TwinMOS

TwinMOS TwinTAB-T102D1 Manuale utente

Archos

Archos 9.7 xenon Manuale utente

Getac

Getac E100 Manuale utente

HANNspree

HANNspree HANNspad SN70T3 Manuale utente

Philips

Philips PI3105W2/55 Manuale utente

LG LG-V935 Manuale utente

Zeki

Zeki TBDB763B Manuale utente

Ricoh

Ricoh eQuill Manuale utente

MaxWest

MaxWest Nitro Phablet 9 Manuale utente