Duerkopp Adler 559 Istruzioni operative

559

Doppelkettenstich Knopflochautomat

Einfachkettenstich Schnürlochautomat

Automatic double-chainstitch buttonholer

Automatic single-chainstitch eyelet machine

Bedienanleitung / Operating Instructions

Aufstellanleitung / Installation Instructions

Serviceanleitung / Service Instructions

Postfach 17 03 51, D-33703 Bielefeld Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 5 21/ 9 25-00 Telefax+49(0)521/9252435www.duerkopp-adler.com

Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:

07/2007 Rev. index: 01.0 Printed in Federal Republic of Germany 0791 559001

Anleitung, komplett / Manual, complete

559

Eigentum der Dürkopp Adler AG und urheberrechtlich geschützt. Jede, auch auszugsweise

Wiederverwendung dieser Inhalte ist ohne vorheriges schriftliches Einverständnis der Dürkopp Adler AG

verboten.

Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner,

even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.

Übersicht Summary

Bedienanleitung

Aufstellanleitung

Serviceanleitung

Bauschaltplan

9890 580001 B

Pneumatikgeräteplan

9770 559001

Operating Instructions

Installation Instructions

Service Instructions

Interconnection-diagram

9890 580001 B

Pneumatic circuit plan

9770 559001

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

Index Page:

Part 3: Service Instructions Class 559

1. General notes

1.1 Necessaryprogramsetting ........................................ 3

2. Adjusting the locking positions

2.1 General notes ................................................ 4

2.2 Looper and spreader eccentric ...................................... 5

2.3 Rotarythreadtake-updisc ........................................ 6

2.4 Throweccentric ............................................... 7

3. Needle bar positioning .......................................... 8

4. Aligning the looper turret ........................................ 9

5. Aligning the needle bar parallel to the looper turret........................ 11

6. Transversal motion of the fabric support plate ........................... 13

7. Longitudinal motion of the fabric support plate .......................... 15

8. Clamping plates

8.1 Insertedclampingplates.......................................... 17

8.2 Aligning the clamping plates as to the fabric support plate...................... 18

8.3 Adjusting the spreading........................................... 19

8.4 Heightofthefabricclamps......................................... 21

8.5 Adjusting the locking sheet ........................................ 22

8.6 Arrestoftheclampingplates ....................................... 23

8.7 Adjustingthefabricclampingpressure ................................. 24

9. Adjusting the seam width

9.1 Presettingtheseamwidth......................................... 25

9.2 Needle zero position ............................................ 26

10. Cutting knife (Eyelet knife)

10.1 Positionofthecuttingknife ........................................ 29

10.2 Adjustingtheknifeparalleltothecuttingblock............................. 31

10.3 Cuttingblockadjustment.......................................... 32

10.4 Adjustingtheswitchforthetrimmingsystem.............................. 33

10.5 Cuttingpressure............................................... 34

10.6 Cuttingduration............................................... 34

Index Page:

11. Looper height ................................................ 35

12. Adjusting the looping stroke ...................................... 36

13. Needle bar height.............................................. 38

14. Distance between looper and needle ................................. 39

15. Needle guard ................................................ 40

16. Spreader ................................................... 41

17. Spreader plate ............................................... 42

18. Throat plate ................................................. 43

19. Adjusting the needle thread knife ................................... 44

20. Adjusting the fabric clamps ....................................... 46

21. Thread controller spring ......................................... 47

22. Maintenance ................................................. 48

23. Annex

23.1 Adjusting operations without head cover ................................ 49

23.2 Fusesinthecontrolbox .......................................... 50

23.3 Exchange of the control .......................................... 50

24. Service menu (technician level)

24.1 Activatingtheservicemenu........................................ 51

24.2 Selectionofamenuitem/submenuitem................................. 51

24.3 Multitest.................................................... 51

24.4 Quittingtheservicemenu ......................................... 51

24.5 Listofmenuandsubmenuitems..................................... 52

24.6 Menu items 500 (Configuration automatic buttonholer) ........................ 53

24.7 Menu items 520 (Tension data for the needle thread calibration) .................. 54

24.7 Menu items 550 (Configuration operation) ............................... 54

24.8 Menuitems600(Multitest)......................................... 56

25. Error messages ............................................... 64

26. Troubleshooting .............................................. 69

1. General notes

The service manual on hand describes the adjustment of the automatic

buttonholer 559 in an appropriate sequence.

ATTENTION !

Various setting positions are interdependent.

Therefore it is absolutely necessary to make the individual

adjustments following the described order.

The operations described in this service manual must only be executed by

qualified staff or correspondingly instructed persons respectively!

Caution: Danger of breakage !

Before recommissioning of the automatic buttonholer after

disassembly operations first carry out the necessary adjustments

according to these service instructions.

Before all setting operations of parts involved in the stitch

formation:

–Insert a new needle without any damage.

Caution: Danger of injury !

In case of repair, alteration and maintenance work:

–Switchthemainswitchoff.

Exception:

Adjustments carried out with the help of test or adjusting programs.

Adjusting operations and function tests when the machine is

running

–Carry out adjusting operations and function tests of the running

machine only under observation of all safety measures and with

utmost caution.

Adjusting operation in the needle zone

–In order to avoid injuries remove the corresponding parts before

carrying out adjusting operations.

Exception:

The parts are absolutely necessary for the adjusting operations.

1.1 Necessary program setting

For adjusting the automatic buttonholer the following buttonhole shape

has to be set at the control panel:

–Buttonhole without bartack

–Connecting stitch = 0

–No cutting space

–Set the connecting stitch to “wide” (see chapter 9 “Setting the seam

width”)

Note!

The set seam width has to be checked not only mechanically but

also at the control panel!

2. Adjusting the locking positions

2.1 General notes

With the help of the locking positions an easy adjustment of the needle

motion to the looper and spreader motions is possible.

When the arm shaft is in staking-out position, the rotary thread take-up

disc and the eccentrics for the spreaders, the loopers and the

connecting stitch have to be in staking-out position, too.

The positions have been set by the manufacturer in such a way that

standard material can be sewn with the 559.

If you want to use other needle sizes, thread sizes or materials, you

may have to set positions slightly differing from the staking-out

position.

The locking pegs are included in the accessories of the machine and

have a diameter of 5 mm.

2.2 Looper and spreader eccentric

Caution: Danger of injury!

Switchthemainswitchoff.

Adjust the eccentrics only with the sewing machine switched off.

Standard checking

When the arm shaft is staked out with arresting pin 1, it should

be possible to stake out the looper eccentric 3 and the spreader

eccentric 4, too.

–Stake out the arm shaft with arresting pin 1.

Important !

In this position the needle bar must be in the top dead center in

front of the left entry point.

–Check with the arresting pin 2 whether the looper eccentric 5 and

the spreader eccentric 6 can be staked out.

Correction

–Stake out the arm shaft with the arresting pin 1.

–Loosen the screws at the looper eccentric 3.

–Turn and stake out the eccentric.

–Tighten the screws.

–Loosen the screws at the spreader eccentric 4.

–Turn and stake out the eccentric.

–Tighten the screws.

64 3 25

2.3 Rotary Thread Take-up Disc

Caution: Danger of injury!

Switchthemainswitchoff.

Adjust the rotary thread take-up disc only with the sewing machine

switched off.

Standard checking

When the arm shaft has been arrested through the arresting pin 2,

so that the looper holder is in the left end position (left entry point),

the rotary thread take-up disc 6 should be in the right position

for a needle 4 that is put on the bore hole of the rotary thread take-up

disc to butt against the right surface 3.

Correction

–Remove the tension plate 1.

–Loosen the screws on the belt pulley 5.

–Push the needle 4 through the bore hole in the rotary thread

take-up disc 6.

–Turn the rotary thread take-up disc until the needle 4 butts against

the surface 3.

–Fix the screws on the belt pulley 5 again.

654 3

Altri manuali per 559

Indice

Altri manuali Duerkopp Adler Macchina da cucire

Duerkopp Adler

Duerkopp Adler 512/532 Manuale utente

Duerkopp Adler

Duerkopp Adler 524-101 Guida

Duerkopp Adler

Duerkopp Adler 669 Premium Manuale utente

Duerkopp Adler

Duerkopp Adler 558 Manuale utente

Duerkopp Adler

Duerkopp Adler 743-105 s Istruzioni per l'installazione

Duerkopp Adler

Duerkopp Adler Tape Feeder Manuale utente

Duerkopp Adler

Duerkopp Adler 570 Guida

Duerkopp Adler

Duerkopp Adler 577-1111 Manuale utente

Duerkopp Adler

Duerkopp Adler 271 Manuale utente

Duerkopp Adler

Duerkopp Adler 221 Guida

Duerkopp Adler

Duerkopp Adler 52Xi Istruzioni operative

Duerkopp Adler

Duerkopp Adler 744-122 Istruzioni operative

Duerkopp Adler

Duerkopp Adler 171 Manuale utente

Duerkopp Adler

Duerkopp Adler 1180-5 Guida alla risoluzione dei problemi

Duerkopp Adler

Duerkopp Adler 609 Manuale utente

Duerkopp Adler

Duerkopp Adler 530 Istruzioni operative

Duerkopp Adler

Duerkopp Adler 4220i-6 Guida

Duerkopp Adler

Duerkopp Adler 205-64 Guida

Duerkopp Adler

Duerkopp Adler 669 Premium Istruzioni operative

Duerkopp Adler

Duerkopp Adler 961-11-1 Guida

Duerkopp Adler

Duerkopp Adler 523 Manuale utente

Duerkopp Adler

Duerkopp Adler 1183i-7 Guida

Duerkopp Adler

Duerkopp Adler 743-221 Manuale utente

Duerkopp Adler

Duerkopp Adler 576 Guida

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Singer

Singer 2517 Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

Singer

Singer 148-5 Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Singer

Singer 15-91 Manuale utente

Brother

Brother BB370 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Singer

Singer 6038 Manuale utente

Singer

Singer 413K Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente