Duerkopp Adler 609 Manuale utente
609
Spezialnähmaschine
Betriebsanleitung
Instruction manual
Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld
Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com
D
GB
Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:
10/2007 Rev. index: 01.0 Printed in Federal Republic of Germany 0791 609741
Alle Rechte vorbehalten.
Eigentum der Dürkopp Adler AG und urheberrechtlich geschützt. Jede, auch auszugsweise
Wiederverwendung dieser Inhalte ist ohne vorheriges schriftliches Einverständnis der Dürkopp Adler AG
verboten.
All rights reserved.
Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner,
even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.
Copyright © Dürkopp Adler AG - 2007
Foreword
This instruction manual is intended to help the user to become familiar
with the machine and take advantage of its application possibilities in
accordance with the recommendations.
The instruction manual contains important information on how to
operate the machine securely, properly and economically. Observation
of the instructions eliminates danger, reduces costs for repair and
down-times, and increases the reliability and life of the machine.
The instruction manual is intended to complement existing national
accident prevention and environment protection regulations.
The instruction manual must always be available at the machine/sewing
unit.
The instruction manual must be read and applied by any person that is
authorized to work on the machine/sewing unit. This means:
–Operation, including equipping, troubleshooting during the work
cycle, removing of fabric waste,
–Service (maintenance, inspection, repair) and/or
–Transport.
The user also has to assure that only authorized personnel work on the
machine.
The user is obliged to check the machine at least once per shift for
apparent damages and to immediatly report any changes (including the
performance in service), which impair the safety.
The user company must ensure that the machine is only operated in
perfect working order.
Never remove or disable any safety devices.
If safety devices need to be removed for equipping, repairing or
maintaining, the safety devices must be remounted directly after
completion of the maintenance and repair work.
Unauthorized modification of the machine rules out liability of the
manufacturer for damage resulting from this.
Observe all safety and danger recommendations on the machine/unit!
The yellow-and-black striped surfaces designate permanend danger
areas, eg danger of squashing, cutting, shearing or collision.
Besides the recommendations in this instruction manual also observe
the general safety and accident prevention regulations!
General safety instructions
The non-observance of the following safety instructions can cause
bodily injuries or damages to the machine.
1. The machine must only be commissioned in full knowledge of the
instruction book and operated by persons with appropriate training.
2. Before putting into service also read the safety rules and
instructions of the motor supplier.
3. The machine must be used only for the purpose intended. Use of
the machine without the safety devices is not permitted. Observe all
the relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, presser foot, needle
plate, feed dog and bobbin) when threading, when the workplace is
left, and during service work, the machine must be disconnected
from the mains by switching off the master switch or disconnecting
the mains plug.
5. Daily servicing work must be carried out only by appropriately
trained persons.
6. Repairs, conversion and special maintenance work must only be
carried out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems, disconnect the
machine from the compressed air supply system (max. 7-10 bar).
Before disconnecting, reduce the pressure of the maintenance unit.
Exceptions to this are only adjustments and functions checks made
by appropriately trained technicians.
8. Work on the electrical equipment must be carried out only by
electricians or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted,
except as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us
and made only in adherence to all safety regulations.
11. For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such time as
the entire sewing unit is found to comply with EC directives.
13. The line cord should be equipped with a country-specific mains
plug. This work must be carried out by appropriately trained
technicians (see paragraph 8).
It is absolutely necessary to respect the safety
instructions marked by these signs.
Danger of bodily injuries !
Please note also the general safety instructions.
Content Page:
Part 2: Installation Instructions Class 609
1. Scope of delivery .............................................. 3
2. General and transport packing ..................................... 3
3. Assembling the stand
3.1 Assembling the stand components (MG55-3 stand) .......................... 4
3.2 Assembling the table plate and mounting the control unit ...................... 5
3.3 Settingtheworkingheight ......................................... 7
4. Mounting the machine head
4.1 Fitting the machine head on the table plate ............................... 8
4.2 Earthing .................................................... 9
5. Mounting the table and pedal extension (optional equipment)
5.1 Mounting the table extension........................................ 10
5.2 Mounting the pedal extension ....................................... 11
6. Sewing drive
6.1 Connecting the HoHsing HVP 70-4-ED-2-CE sewing drive ..................... 12
6.1.1 Connecting the control unit ........................................ 12
6.1.2 Mounting and connecting the external operating panel C300 .................... 13
6.1.3 Mounting and connecting the proximity switch ............................. 13
6.1.4 Connecting the control connection of the thread trimmer and thread tension release ...... 14
7. Checking the mains voltage and connecting the machine .................... 15
8. Setting the sewing drive
8.1 SettingtheHoHsingHVP70-4-ED-2-CEsewingdrive......................... 15
8.1.1 Settingparametersofthecontrolunit .................................. 15
8.1.2 Settingtheproximityswitchandcheckingitspositioning....................... 15
9. Lubrication .................................................. 17
10. Sewing test .................................................. 18
GB
2
1
5
3
8
6
4
9
7
1. Scope of delivery
What items are supplied depends on your order.
Prior to assembling, please check that all the required parts are
present.
This instruction applies to a special sewing machine of which all
individual components are delivered by the Dürkopp Adler AG.
Basic equipment:
–Machine head with integrated direct drive 1
–Control unit 5
–Set value initiator 6
–External operating panel 4
–Proximity switch 2
–Belt guard 3
–Yarn stand 8
–Small parts in the accessories
Optional equipment
–Stand MG55-3 with table plate, pedal with pedal linkage, drawer
–Table extension 9 (incl. pedal extension)
–Sewing light with table fastening 7
2. General and transport packing
ATTENTION!
This special sewing machine may only be set up by qualified
personnel.
Transport packing
If you have purchased an assembled special sewing machine, the
following transport protections have to be removed:
–Safety bands and wooden battens on the machine head, table and
stand.
3
GB
3. Assembling the stand
3.1 Assembling the stand components (MG55-3 stand)
–Assemble the components as shown in the illustration above.
–Turn the set screw 2 to ensure the stand’s stability.
Each of the stand’s four feet must touch the ground!
–Screw the oil can holder 3 onto the stand’s left bar.
–Fix the pedal 1 onto the cross brace.
4
2
3
1
GB
3.2 Assembling the table plate and mounting the control unit
The positions of the components that are to mounted are indicated in
the following sketch.
Punch-mark for the stand
Control
Mains socket (optional
add-on kit)
Cable channel
Punch-mark for
set value initiator
Drawer
The measures in brackets are auxiliary sizes defined by the
components.
5
–Screw on the drawer 4 with the sockets underneath the left half of
thetableplate.
–Fix the control unit 1 with three woodscrews (5x30) underneath the
right half of the table plate .
–Screw on the holder for the strain relief of the mains cable
underneath the table plate.
–Screw the set value initiator 7 onto the mounting bracket (4 screws
M5x10).
–Fix the bracket with the set value initiator underneath the table
plate with 4 woodscrews (5x30).
–Screw the cable channel 6 under the table plate.
–Fix the table plate with woodscrews (6,0x30) on the stand. The
position of the table plate is indicated by the dimensions given in
the sketch.
–Assemble the pedal linkage 2
–Hinge the pedal linkage onto the pedal and the set value initiator of
thesewingdrive.
–Adjust the height of the pedal linkage by turning the screw so that
the pedal, when released has an inclination of about 10°.
–Insert the yarn holder 5 into the hole of the table plate.
–Hammer the machine head support 3 into the hole on the table
plate.
6
6
3
1
4
57
2
Altri manuali per 609
4
Indice
Altri manuali Duerkopp Adler Macchina da cucire
Duerkopp Adler
Duerkopp Adler 1180-5 Guida alla risoluzione dei problemi
Duerkopp Adler
Duerkopp Adler 173 Manuale utente
Duerkopp Adler
Duerkopp Adler 530 Istruzioni operative
Duerkopp Adler
Duerkopp Adler 366 Manuale utente
Duerkopp Adler
Duerkopp Adler 204-102 Guida
Duerkopp Adler
Duerkopp Adler 4280-6 Guida alla risoluzione dei problemi
Duerkopp Adler
Duerkopp Adler 167-372 Guida
Duerkopp Adler
Duerkopp Adler 524-105 Guida
Duerkopp Adler
Duerkopp Adler 961-23-4/0 Guida
Duerkopp Adler
Duerkopp Adler 530 Manuale utente
Duerkopp Adler
Duerkopp Adler 267 Guida alla risoluzione dei problemi
Duerkopp Adler
Duerkopp Adler 506-3 CNC Manuale utente
Duerkopp Adler
Duerkopp Adler 251-140042 Manuale utente
Duerkopp Adler
Duerkopp Adler 4182i-1 Guida alla risoluzione dei problemi
Duerkopp Adler
Duerkopp Adler 559 Istruzioni operative
Duerkopp Adler
Duerkopp Adler 275 Manuale utente
Duerkopp Adler
Duerkopp Adler 887 Manuale utente
Duerkopp Adler
Duerkopp Adler 467 Guida
Duerkopp Adler
Duerkopp Adler 745-24 Guida
Duerkopp Adler
Duerkopp Adler 294 Schema elettrico
