Dynaudio Evidence Manuale utente

Dynaudio A/S, 8660 Skanderborg, Denmark

Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone: +49 4108 - 41 80 - 0

www.dynaudio.com

Owners Manual Evidence

All there is.

Dynaudio Evidence

Content

Introduction ....................................................................................... 3

Safety Instructions ............................................................................ 4

About this guide ................................................................................ 4

Used expressions and symbols .................................................... 4

Unpacking the Loudspeakers .......................................................... 5

Connecting......................................................................................... 6

Connecting the loudspeakers ....................................................... 6

Connecting surround speakers ..................................................... 7

Positioning......................................................................................... 8

General recommendations............................................................ 8

Distance to back and side walls.................................................... 9

Floor-standing loudspeaker set-up ............................................... 9

Loudspeaker Toe-In.................................................................... 10

Room and furniture influence...................................................... 10

Grille............................................................................................ 10

Multi-Channel Setup........................................................................ 11

Loudspeakers for multi-channel setups ...................................... 11

Multi-channel loudspeaker setup ................................................ 12

Running-in / Care & Maintenance .................................................. 13

Warranty........................................................................................... 14

Technical Specifications ................................................................ 27

Evidence

book

Seite

Montag

Januar

2009

2:04

Dynaudio Evidence 3

Introduction

English Introduction

Dear Music Lover,

Thank you for your decision to acquire these very special Dynaudio Evidence

loudspeakers.

They feature advanced Dynaudio loudspeaker technology, resulting in music

reproduction at a very high level, making many familiar recordings a new listening

experience altogether. This advanced technology results from many years of intense

research and development, the highest quality standards in production, and Dynaudio's

enduring passion for musical truth.

Please also visit our web site www.dynaudio.com.

You will find additional information:

•Dynaudio dealers in your area

•Questions and answers about Dynaudio products and technical information

•Dynaudio events and news

We wish you many years of enjoyment experiencing music,

Dynaudio

Evidence

book

Seite

Montag

Januar

2009

2:04

Dynaudio is one of very few companies who can realize such loudspeaker concepts

through it's own in-house development and production facilities. These facilities are so

advanced and the quality control is so strict that Dynaudio is TS16949 certified.

Each loudspeaker is constructed by Dynaudio's master craftsmen in Denmark to these

high standards of quality. To realize the highest sound quality from the loudspeakers,

some areas should be addressed, as will be explored on the following pages. By

considering the tips and suggestions, you will achieve the maximum performance and

enjoyment of the loudspeaker and it's advanced musical capabilities for a long time to

come.

4Dynaudio Evidence

Safety Instructions

About this guide

Used expressions and symbols

In this operating manual following signs and symbols are used:

CAUTION HIGH SOUND PRESSURE LEVELS

Listening to high sound pressure levels over a longer period of time

may harm your hearing.

XTo avoid auditory effect do not listen to very high sound levels

over a longer period of time.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION Indicates (in combination with a safety sign) a potentially hazardous situation which, if

not avoided, could result in minor or moderate injury or damage to equipment.

Note: Additional information is provided, which is important to fully understand the

loudspeakers and how to operate it.

XThe arrow will identify steps to be performed. Please follow the instructions carefully.

Multiple steps that should be performed consecutively are numbered.

Please follow these instructions carefully.

Evidence

book

Seite

Montag

Januar

2009

2:04

Dynaudio Evidence 5

Unpacking the Loudspeakers

Dynaudio Evidence models are protected during transit by stable and secure packaging.

Due to their weight and dimensions, they are shipped in a special wooden crate.

To unpack the Evidence Master loudspeakers:

XPlease consult your Dynaudio dealer.

To unpack the Temptation and Center models:

1. Lay the transport box flat on the floor.

2. Remove the screws along the top plate, the top plate and the five safety pads.

3. Remove the screws along the bottom plate.

4. Carefully lift the sidewall frame.

5. Carefully remove the loudspeaker by lifting it up horizontally.

6. Turn the loudspeaker and slowly place it on its plinth.

7. Remove the wrapping foil by lifting it on one end and unwrap it in a clock-wise motion.

Do not use blades, cutters or any other sharp objects that will destroy the foil.

8. Fix the sidewall frame on the bottom plate again.

9. Place the wrapping and the safety pads back into the box and close the plate.

The wooden transport crates and custom cartons are intended for long-term use and

should be used whenever the loudspeakers are to be transported, and as such they

should be stored for future use.

CAUTION HEAVY PARTS

Unpacking the Evidence loudspeakers without help may cause

personal injuries or product damage.

XConsult your trained Dynaudio dealer for assistance.

XTwo people are recommended to unpack the loudspeakers.

Fig. 1 Packaging (Temptation and Center models only,

figure shows Temptation).

Evidence

book

Seite

Montag

Januar

2009

2:04

6Dynaudio Evidence

Connecting

Connecting the loudspeakers

1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the

cabinet (see Fig. 2). The high quality, gold plated binding posts can accommodate

different connection systems:

–4-mm-plugs (“banana plugs”): The pins can be put directly into the binding post

without any tightening necessary.

–Cable spades: Un-tighten the binding posts, insert the spade into the opening, and

secure the spade by tightening the posts.

–Bare wires: Un-tighten the binding posts and place the cable into the binding

posts. Tighten the posts.

Note:

• With every connection system, ensure that the contact is tight and has a proper

contact area.

• Connectors with similar gold plating as the loudspeakers binding posts will typically

offer the best results and remain corrosion-free.

• Please ensure that the positive and negative cables do not make contact with each

other.

• Tighten the posts, and check the contact after a few days to make sure that it hasn’t

loosened.

Fig. 2 Binding posts at rear of cabinet.

Evidence

book

Seite

Montag

Januar

2009

2:04

Dynaudio Evidence 7

Connecting

2. Connect the other cable ends to the loudspeaker outputs of your switched off power

amp (see Fig. 3).

Note:

XPlease make sure that both loudspeakers are connected properly. For a better

distinction one of the two veins of most loudspeaker cables are marked.

– Connect the red marked post of the speaker to the red marked output of the amp.

– Connect the white or black marked post to the white or black marked output

accordingly.

Bi-wiring/bi-amping

Dynaudio loudspeakers feature a carefully fine-tuned cross-over, optimized using

selected parts and an advanced circuitry to achieve a truly balanced and smooth

frequency response. Therefore, dividing the frequency sections through bi-wiring or

bi-amping is not recommended.

Choice of loudspeaker cable

The impact a loudspeaker cable can have on sound quality may be dramatic, though in

general quality cable products will yield a quality result. Dynaudio loudspeakers are

designed to be very neutral and thus are not extremely suited to any particular type of

cable. The choice of cable is as much a factor of matching the cable to the entire audio

system. Please consult your Dynaudio dealer for information about compatible

loudspeaker cables that will suit both your electronics and the Dynaudio loudspeakers.

Connecting surround speakers

When connecting a two-channel stereo system, only the right and left channels are

connected to the amplifier.

In a surround set-up, center, side or rear loudspeakers as well as a subwoofer are

typically connected to provide for a multi-channel listening experience. Please refer to the

amplifier’s owner manual for particular connection instructions and see chapter “Multi-

channel loudspeaker setup” on page 12 for further help.

Fig. 3 Amplifier loudspeaker outputs (example).

Evidence

book

Seite

Montag

Januar

2009

2:04

8Dynaudio Evidence

Positioning

Every room will have its own particular sound characteristics. Any room is also shaped

and decorated uniquely, and therefore remains independent regarding options for

positioning loudspeakers. The following steps are general suggestions that will make the

correct positioning easier to achieve.

General recommendations

Following explanations refer to Fig. 4:

• The distance between each loudspeaker and your listening position should be the

same (B). Try to achieve an isosceles triangle.

• The distance between the loudspeakers should be the same or better slightly less

than the distance between each loudspeakers and your listening position (A, B).

• The closer the listening position is in relation to the loudspeakers, the closer the

speakers can be positioned to each other.

(As a starting point, it is recommended that the speakers be about 2 meters apart

from each other for the best results (A).)

• If the speakers are positioned too close to each other, the stereo image will not seem

realistic; if that distance is too wide, the image may leave an acoustic hole in the

middle.

• Paying attention to the image during listening tests will help dictate optimum

placement during experimentation and set-up.

CAUTION EXCESSIVE BRIGHTNESS

Direct sunlight or excessive brightness can affect the color of any natural wood veneer

(the structural integrity of the cabinet will not be affected).

XTo maintain the aesthetic quality of the loudspeakers for the long term, placing such in

very warm, very cold, or very humid environments should be avoided.

Fig. 4 Positioning the loudspeakers.

A≤B

Evidence

book

Seite

Montag

Januar

2009

2:04

Dynaudio Evidence 9

Positioning

Distance to back and side walls

Every loudspeaker not only disperses sound energy directly into the room, but also to the

side and even backwards. As a result, time-delayed reflections occur and add to the

original music signal. Thus, when loudspeakers are positioned too close to walls, the

sound quality can be restricted.

The Dynaudio loudspeaker models were developed to be placed free-standing, and

therefore they reach their optimum performance when positioned as clear of any walls as

possible.

XTo reduce possible influences from the back and sidewalls, the distance to these

boundaries should ideally not be less than 0.5 meter.

Floor-standing loudspeaker set-up

Dynaudio feature a special base construction, which offers both an ideal performance and

mechanical basis. Integrated into the base plinth are four individual spike assemblies.

These stabilize the cabinet on an extremely small contact area, and therefore prevent any

wobbling while offering optimal resonance control.The individually adjustable spikes allow

leveling of the cabinet on uneven floors.

Fig. 5 Distance to walls.

D≥0.5 m

CAUTION SPIKES WITH SHARP PEAKS

The sharp peaks of the spikes may cause injuries and damage sensitive surfaces like

hardwood flooring or tile.

XBe careful when handling the loudspeakers.

XPlace plates between the spikes and the surface to protect the underlying surface.

(Note: The spike will not destroy a carpet surface.)

Evidence

book

Seite

Montag

Januar

2009

2:04

10 Dynaudio Evidence

Positioning

Loudspeaker Toe-In

Depending on your personal listening environment and room dimensions, loudspeakers

may be angled in towards the listening area to focus the sound radiation. This positioning

will typically improve imaging and is especially recommended by Dynaudio (see Fig. 6).

Room and furniture influence

The sound quality of any loudspeaker is influenced by the furniture, wall materials and

other objects in the listening room. For example, large rooms without much furniture and

many clean, hard wall surfaces can give a bright and diffuse sound with diverse echoing

frequencies. A room with thick carpet, curtains and soft furniture surfaces will give a

slightly warmer, darker and less lively sound.

Grille

A cloth grille is included and can be affixed to the cabinet to help protect the drivers from

dust and any other influences. The grille is acoustically optimized, but the highest sound

quality levels will be attained without any grille covers in place during listening.

XTo remove the grille, gently pull the grille at all corners straight away from the front.

XTo fit the grille, line up the studs with the corresponding front baffle holes and gently

push the grille in at all corners.

Fig. 6 Angle inwards loudspeakers to improve imaging.

Evidence

book

Seite

Montag

Januar

2009

2:04

Altri manuali per Evidence

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dynaudio Altoparlanti

Dynaudio

Dynaudio Acoustics BM 5A Manuale utente

Dynaudio

Dynaudio Evidence Platinum Manuale utente

Dynaudio

Dynaudio LYD-48 L Manuale utente

Dynaudio

Dynaudio LYD Series Manuale utente

Dynaudio

Dynaudio S4-C65 Manuale utente

Dynaudio

Dynaudio Confidence Manuale utente

Dynaudio

Dynaudio Xeo 10 Manuale utente

Dynaudio

Dynaudio IP 24 Manuale utente

Dynaudio

Dynaudio Stand4 Manuale utente

Dynaudio

Dynaudio Center Base2 Manuale utente

Dynaudio

Dynaudio Xeo 6 Manuale utente

Dynaudio

Dynaudio Focus Manuale utente

Dynaudio

Dynaudio Air Series Manuale utente

Dynaudio

Dynaudio Contour Manuale utente

Dynaudio

Dynaudio LYD 5 Manuale utente

Dynaudio

Dynaudio Contour Manuale utente

Dynaudio

Dynaudio Contour Manuale utente

Dynaudio

Dynaudio Acoustics BM 5A Manuale utente

Dynaudio

Dynaudio LYD Series Manuale utente

Dynaudio

Dynaudio IC 17 Manuale utente

Dynaudio

Dynaudio BM 6A mkII Manuale utente

Dynaudio

Dynaudio BM 5A COMPACT Manuale utente

Dynaudio

Dynaudio IP 17 Manuale utente

Dynaudio

Dynaudio BM 5A COMPACT Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente