Dynaudio IP 17 Manuale utente

Passive Speakers

User manual

▪Introduction

▪Initial Setup

▪1. Unpacking

▪2. Positioning

▪3. Connecting

▪4. Listening

▪Safety Instructions

▪High Sound Pressure Levels

▪About this guide

▪Used expressions and symbols

▪Connecting the loudspeakers

▪Bi-wiring / Bi-amping

▪Choice of Loudspeaker Cable

▪Connecting Surround Speakers

▪Positioning

▪Excessive Brightness

▪Distance to Back and Side Walls

▪Adapting the Bass Reﬂex Port

▪Floor-standing Loudspeaker Setup

▪Spikes with Sharp Peaks

▪Compact Loudspeaker Setup

▪Loudspeaker Toe-In

▪Room and Furniture Inﬂuence

▪Grille

▪Multi-Channel Setup

▪Loudspeakers for Multi-channel Setups

▪Centre Speaker

▪Rear Speakers

▪Subwoofer

▪Multi-Channel Loudspeaker Setup

▪Running-in / Care and Maintenance

▪Running in the Loudspeakers

2Passive Speakers User manual

▪Power Rating

▪Distorted Output Signals

▪Aggressive Cleaning Fluids

▪Cleaning the Loudspeakers

▪Warranty

4Passive Speakers User manual

Introduction

Dear Music Lover,

thank you for your decision to acquire Dynaudio loudspeakers.

Every Dynaudio model features the advanced Dynaudio loudspeaker technology, resulting in music reproduction

at a very high level, making many familiar recordings a new listening experience altogether. This technology results

from many years of intense research and development, the highest quality standards in production, and

Dynaudio‘s enduring passion for musical truth.

Dynaudio is one of very few companies who can realize such loudspeaker concepts through its own in-house

development and production facilities. These facilities are so advanced and the quality control is so strict that

Dynaudio is TS16949 certiﬁed.

Each loudspeaker is constructed by Dynaudio’s master craftsmen in Denmark to these high standards of quality.

To realize the highest sound quality from the loudspeakers, some areas should be addressed, as will be explored

on the following pages.

By considering the tips and suggestions, you will achieve the maximum performance and enjoyment of the

loudspeaker and it‘s advanced musical capabilities for a long time to come.

We wish you many years of enjoyment experiencing music.

Dynaudio

Introduction 5

Initial Setup

The initial set-up of a Dynaudio loudspeaker is relatively easy. Please take your time reading the guidelines and

more detailed instructions on the following pages of this manual after completing the ﬁrst four steps as listed

below.

6Passive Speakers User manual

1. Unpacking

Carefully remove the loudspeaker from the packaging and position it with its underside on the ﬂoor. Remove the

white cloth cover around the loudspeaker. We suggest that you keep the box and white cloth for future use.

2. Positioning

Place the loudspeaker facing the listening area at its desired position in the room. Remove the foam plugs from

the rear bass reﬂex port (if provided with your loudspeaker model).

3. Connecting

While the ampliﬁer is switched o, connect each loudspeaker to the ampliﬁer with the speaker cable. Turn the

volume level all the way down and power the ampliﬁer on.

4. Listening

The loudspeaker is now ready to play. Optimal performance will only be realised after careful positioning and

running in the speakers as described over the course of the following pages. Enjoy your new Dynaudio

loudspeakers!

Feel free to contact the Dynaudio Customer Service department with any further questions or for additional

assistance.

www.dynaudio.com/support

Initial Setup 7

Safety Instructions

High Sound Pressure Levels

Caution

Listening to high sound pressure levels over a longer period of time may harm your hearing.

▪To avoid auditory eect, do not listen to music at high sound levels over a longer period of time.

8Passive Speakers User manual

About this guide

Used expressions and symbols

In this operating manual, the following signs and symbols are used:

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the product.

Caution

Indicates (in combination with a safety sign) a potentially hazardous situation which, if not avoided, could result in

minor or moderate injury or damage to equipment.

Note

Additional information is provided, which is important to fully understand the loudspeaker and how to operate it.

About this guide 9

Connecting the loudspeakers

Figure 1: Binding posts at rear of cabinet (example)

Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the cabinet (see Figure 1). The

high quality, gold plated binding posts can accommodate dierent connection systems:

▪4.0 mm banana plugs: The pins can be put directly into the binding post without any tightening necessary.

▪Cable spades: Untighten the binding posts, insert the spade into the opening, and secure the spade by tightening the

posts.

▪Bare wires: Untighten the binding posts and place the cable into the binding posts. Tighten the posts.

Note

▪With every connection system, ensure that the contact is tight and has a proper contact area.

▪Connectors with similar gold plating as binding posts will typically oer the best results and remain corrosion-free.

▪Please ensure that the positive and negative cables do not make contact with each other. Tighten the posts, and check

the contact after a few days to make sure that it hasn’t loosened.

10 Passive Speakers User manual

Altri manuali per IP 17

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Dynaudio Altoparlanti

Dynaudio

Dynaudio Xeo 2 Manuale utente

Dynaudio

Dynaudio Focus XD Manuale utente

Dynaudio

Dynaudio Special Forty Manuale utente

Dynaudio

Dynaudio BM12A Manuale utente

Dynaudio

Dynaudio Xeo 10 Manuale utente

Dynaudio

Dynaudio Excite Manuale utente

Dynaudio

Dynaudio LYD Series Manuale utente

Dynaudio

Dynaudio Special Twenty-Five Manuale utente

Dynaudio

Dynaudio BM 6A mkII Manuale utente

Dynaudio

Dynaudio Focus Manuale utente

Dynaudio

Dynaudio Stand4 Manuale utente

Dynaudio

Dynaudio Air Series Manuale utente

Dynaudio

Dynaudio S4-C65 Manuale utente

Dynaudio

Dynaudio Excite X14A Manuale utente

Dynaudio

Dynaudio IC 17 Manuale utente

Dynaudio

Dynaudio Stand4 Manuale utente

Dynaudio

Dynaudio Sapphire Manuale utente

Dynaudio

Dynaudio Air Series Manuale utente

Dynaudio

Dynaudio Focus 380 Manuale utente

Dynaudio

Dynaudio IP 17 Guida di sicurezza

Dynaudio

Dynaudio LYD Manuale utente

Dynaudio

Dynaudio Focus 110 A Manuale utente

Dynaudio

Dynaudio Center Base2 Manuale utente

Dynaudio

Dynaudio Confidence Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente