EAW AC6 Manuale utente
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com 1
AC6 Stinger Instructions
These instructions are to provide a detailed step by step procedure for using the AC6
Stinger kit.
Inventory your kit
Part # Part Name Quantity Reference
2071927-9999 PLATE LOCKING ASSY 1 A
2071924 M5X20 FLH SKT SS BLK 7 B
2071918-9999 Slide Plate 1 C
2072045-9999 Stinger Mount 2 D
2072041-9999 Stinger 2 E
2071404-9999 Mohawk 1 F
E
D
C
A
B
F
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com 2
AC6 Stinger Instructions
Prepare AC6 for Stacking
1. Attach Locking Plate (A) to the top of the rst AC6
• Remove 3x M5x12mm screws from top of AC6 (Figure 1).
• Position Locking Plate over open holes, then use 3x screws (B) to secure plate
to the cabinet (Figure 2)
Figure 3 - Remove screws Figure 4 - Install Slide Plate
2. Attach slide plate (C) to bottom of next AC6
• Remove 4x M5x12mm screws from bottom of AC6 (Figure 3).
• Position Slide Plate over open holes, then use 4x screws (B) to secure plate to
the cabinet (Figure 4)
Figure 1 - Remove screws Figure 2 - Install Locking Plate
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com 3
AC6 Stinger Instructions
Connect two AC6 Column loudspeakers with stacking plates
3. Attach two AC6 columns
• Slowly lay down AC6 with slide plate grill down on a rug or blanket
• Insert next unit with locking plate to connect (Figure 5)
• On rear of rst AC6 locking plate, rotate both screw knobs clockwise to lock
into position.
Figure 5 - Attach AC6 columns Figure 6 - AC6 columns grill down
Attach Stinger to AC6 Array
4. Attach Stinger Mounts (D) to AC6
• Center the mount on the Flytracks for each AC6 (Figure 6)
• Turn the knobs on the mount clockwise to lock into place.
Figure 7 - Position Mount Figure 8 - Stinger Mount attached
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com 4
AC6 Stinger Instructions
5. Attach Stinger (E) to Mounts
• Place stingers in place on the mounts (Figure 9)
• Use supplied pins to secure the two stingers together
• Using pins on mount, secure stinger assembly to mount plates (Figure 10)
Figure 9 - Position Stingers on mounts Figure 10 - Pin stinger assembly to
mount plate
Figure 11 - Stingers assembled with AC6 array
6. Attach Mohawk (F) and suspend/y array
• Attach Mohawk with pins at the end of the stinger (Figure 12)
• Once all pins and knobs are veried as secure, suspend array using a shackle.
Figure 12 - Attach Mohawk to Stinger
Figure 13 - Mohawk installed on Stinger Figure 14 - Completed Stinger Array
Altri manuali per AC6
3
Indice
Altri manuali EAW Altoparlanti
EAW
EAW JFX200 Manuale utente
EAW
EAW CIS50 Manuale utente
EAW
EAW MQ1364 Manuale elenco delle parti
EAW
EAW JFX290 Manuale utente
EAW
EAW MKC Series Manuale utente
EAW
EAW Virtural Array KF850ZF Manuale utente
EAW
EAW CLA6 CLA4 CLA2 Manuale utente
EAW
EAW CIS120 Manuale utente
EAW
EAW KF737 Manuale utente
EAW
EAW SB730P Guida utente
