EBS CPX200NW Manuale utente
EN
ALARM CONTROL UNIT
CPX200NW
User manual
Version of the manual: v1.5
Date of issue: 2015.04.08
Firmware version: 1.1.1
GPR transmitter configurator version: 1.3.45.23
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 2 / 28
EN
DECLARATION OF COMPLIANCE
We, EB p. z o.o., declare with full responsibility that the present
product meets all requirements provided for in the Directive
1999/5/EC of European Parliament and Council dated 9 March 1999
The copy of the “Declaration of Compliance” can be found at
http://www.ebs.pl/en/certificates/ .
IMPORTANT INFORMATION
Crossed symbol of a trash bin means that at the territory of European
Union, the product, after finishing its useful life, shall be disposed of
in a separate, specially dedicated collection point. It refers to the
equipment itself and its accessories marked with that symbol. The
products shall not be disposed of together with non-sortable
municipal waste.
The content of the document is presented “as is”. The present document shall not be
deemed to be providing any warranties, either express or implicit, including but not
limited to, any implied warranties of merchantability or fitness for a particular
purpose, unless it is required by relevant law. The manufacturer reserves the right to
amend the present document or withdraw it any time, without notice.
The manufacturer of the equipment promotes the sustainable development policy. It
reserves the right to modify and improve any functions of the product described in
the present document without previous notice.
The availability of particular functionalities will depend on the software version of the
equipment. Details can be found at the nearest dealer of the equipment.
In no event, the Manufacturer shall be held liable for any loss of data or loss of
profits or any specific, incidental, consequential or indirect damages caused in any
way.
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 3 / 28
EN
CONTENT:
1.
INTRODUCTION ........................................................................................................... 4
2.
CONTROL UNIT FUNCTIONS........................................................................................ 5
2.1.
FUNCTIONAL CHARACTERI TIC.................................................................................... 5
2.2.
ELECTRICAL CHARACTERI TIC ..................................................................................... 6
3.
KEYPAD SPECIFICATION ............................................................................................. 7
4.
REMOTE CONTROL SPECIFICATION .......................................................................... 10
5.
ARMING THE SYSTEM ................................................................................................ 11
5.1.
ARMING THE Y TEM .................................................................................................11
5.1.1.
ARMING FROM KEYBOARD ..................................................................................11
5.1.2.
ARMING FROM REMOTE CONTROL ......................................................................11
5.2.
ARMING THE Y TEM WITH FAULT .............................................................................11
.
DISARMING THE SYSTEM .......................................................................................... 13
6.1.
DI ARMING THE Y TEM ............................................................................................13
6.1.1.
DI ARMING FROM THE KEYBOARD......................................................................13
6.1.2.
DI ARMING FROM THE REMOTE CONTROL ..........................................................13
6.2.
ALARM DI PLAY..........................................................................................................13
6.3.
ALARM MUTE ..............................................................................................................13
7.
PARTITION HANDLING.............................................................................................. 14
7.1.
ARMING / DI ARMING WITH ELECTING PARTITION .................................................14
7.2.
QUICK ARMING / DI ARMING PARTITION ..................................................................14
8.
USER FUNCTIONS ...................................................................................................... 15
8.1.
ALARM MEMORY .......................................................................................................15
8.2.
FAULT MEMORY ........................................................................................................16
8.3.
ZONE BLOCKING.........................................................................................................17
8.4.
ADDING A NEW U ER .................................................................................................17
8.5.
U ER DELETE .............................................................................................................18
8.6.
CHANGE OF U ER CODE..............................................................................................19
8.7.
PROGRAMMING TIME..................................................................................................19
8.8.
PROGRAMMING DATE .................................................................................................19
8.9.
TEXT ME AGE .........................................................................................................20
9.
CHANGE HISTORY...................................................................................................... 28
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 4 / 28
EN
1. INTRODUCTION
Thank you for choosing EB alarm control unit.
CPX200N is a simple, functional alarm control unit integrated with G M/GPR / M
transmitter, intended for small- and medium- sized facilities. The central unit is
equipped with 3 outputs and 7 wired and 9 wireless zones with the possibility to be
divided into 2 partitions. Dedicated KP16 LED keypad was designed in a modern,
discreet style. Portable size, large, comfortable buttons and simple installation
contribute to indisputable advantage of our system.
The product was designed in accordance with the requirements of PN-EN 50131
standards, grade 2, Environmental class II.
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 5 / 28
EN
2. CONTROL UNIT FUNCTIONS
2.1. FUNCTIONAL CHARACTERISTIC
ZONES
•7 zones with the NC / NO / EOL-NC / EOL-NO / DEOL-NC / DEOL-NO
configuration possibility
•9 wireless zones
•Detection lines – instant, delayed, 24h burglary, arming/disarming,
24h tamper, interior delay, 24h burglary silent, 24h fire
PROGRAMMABLE OUTPUTS
•1 monitored alarm output, high-current (max. current 1.1A)
•2 monitored alarm outputs, low-current (max. current 50mA)
FEEDING OUTPUTS
•1 signalling device output (max. current 350mA)
•1 detector output (max. current 350mA)
•1 keypad output (max. current 100mA)
PARTITIONS
•2 partitions with the possibility to assign any number of zones to each of them
KEYBOARD
•cooperation with LED keyboard KP16
•ability to connect up to three keypads
TRANSMISSION
•Transmission of signals through GPR / M module.
•Encryption of data transfer using AE standard
•Communication with monitoring station using dedicated O M.2007 server that
ensures the reliability of data transfer thanks to a redundancy function.
•Control of G M/GPR connection – automatic restoration of connection with
monitoring station or switching to secondary server
CONFIGURATION
•Local, using KP16 keypad or a computer
•Remote through GPR , M or C D
USERS
•1 admin code (main)
•1 service code
•8 user codes
•Possibility to restrict the scope of authorisation to a few codes only
SYSTEM OPTIONS
•Automatic diagnosis of basic system components
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 6 / 28
EN
•Possibility to review faults, alarm memories, event log
•ystem/technical event history up to 5000 events
2.2. ELECTRICAL CHARACTERISTIC
upply voltage: 18VAC (16-20VAC)
Required transformer Power: min. 20VA
Current consumption average/max:
(average measured@: fully charged battery,
established connection with server, connected
keypad, no sensors connected)
120mA / 1100mA @18VAC
Average current consumption; lack of
external supply (without keypad/ with
keypad):
(fully charged battery, no sensors connected,
established connection with server)
60mA / 80mA
Charging current:
(measured with totalny discharged battrey)
max. 350mA
Charging voltage: 13.8V
upported bartery type: Lead-acid 12V
Low voltage – event treshold: 11V
Voltage battery cut off level: below 9V
Working temperature: -10ºC to +55ºC
Working humidity: 5% to 93%
PCB dimensions: 152mm x 78mm x 30mm
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 7 / 28
EN
3. KEYPAD SPECIFICATION
Power supply voltage: 10 – 13.8 VDC
Power consumption: typ. 20 mA, max. 80 mA
Keypad weight: 70 g
Size of casing: 99 x 82 x 19 mm
Keypad type: LED, 16 status LEDs, 4 mode LEDs (ALARM, ARMED,
Y TEM, PROG)
Button layout: tandard telephone keypad 3 x 4 buttons
Drawing 1. KP1 Keypad
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 8 / 28
EN
1. Keypad buttons
0-9 buttons and * as well as # are intended for the keypad and alarm control
unit operation. After first pressing any button, the keypad is backlit. After a few-
second idle time, backlight gets automatically dimmed. In order to make codes
easier to remember, buttons are marked with the alphabet.
2. ALARM LED (red):
Flashing light – means that alarms occurred in the system (alarms memory).
Constant light – means that system is in alarm state.
Off – system is operating correctly.
3. ARMED LED (red):
Flashing light – means that time for leaving any of the partitions is counted.
Constant light – at least one partition is armed
Off – partitions disarmed.
4. SYSTEM LED (yellow):
Flashing light - means that in the control unit’s memory there are faults that has
already ceased (there was power loss, but it has already restored).
Constant light – there is a fault in the system that was not removed.
Off – no fault in the system.
5. PROG LED (blue):
Flashing slowly – service function is activated and it is one of the user functions.
Flashing – data will be entered.
Constant light – installer service function is activated.
. 1 – 1 LEDs (red)
When LED goes on during normal operation, it means the line it is assigned to
was disrupted. Flashing LED means the zone was interlocked. After activating
service functions, LEDs display data.
7. Screwed Connectors
Connectors for connecting cables joining the keypad with the alarm control unit.
8. Cable Entry
It is a place for entering the connection cables.
9. Assembly Holes
The keypad was equipped with four round assembly holes for proper fastening
the keypad.
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 9 / 28
EN
10. Casing Opening Latch
To open the casing it is recommended to use flat 2.5-5mm screwdriver. Insert it
slightly in indicated hole and perform slight lever movement toward the rear side
of the casing.
11. Anti-Sabotage Switch
After the keypad is assembled the switch contact is closed. Unauthorised
disassembly of the keypad will send the message to the alarm control unit. In
order to eliminate surface unevenness, a spring is located on the switch lever.
CPX200NW ALARM CONTROL UNIT – U ER MANUAL 10 / 28
EN
4. REMOTE CONTROL SPECIFICATION
Frequency: 433.92MHz
Coding: Keeloq code hopping
Number of buttons: 4
Battery: Varta Li-Mn 3V type CR2032
- ARM button
- DI ARM button
- ILENT ALARM button
- ALARM button
Indice
Altri manuali EBS Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
