Ebyte E180-ZGI20B-TB Manuale utente

E180-ZG120B-TB User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

Content

1. Module introduction......................................................................................................................................... 2

2. Instruction......................................................................................................................................................... 2

3. Drive installation.............................................................................................................................................. 4

About us................................................................................................................................................................4

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

1. Module introduction

E180-ZG120B-TB has been pre-welded for testing Chengdu Ebyte E180-ZG120B,please refer to the module

manual for detailed use.

All IO of E180 series wireless modules have been exported.

With CP2102G serial chip, serial communication can be developed.

With USB interface, can be directly plugged into the computer for use.

Users can access external power supply and serial port by themselves.

Stable work and easy to develop.

2. Instruction

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

Description：

No.

Description

AVDD

Module power port, 3.3V power

supply is recommended

3.3V

Baseboard LDO output 3.3V, can

supply power to the module

TXD

TXD of cp2102

RXD

RXD of cp2102

PA1

RXD of the module

PA0

TXD of the module

No.

Name

Direction

Function

GND

Ground, connected to power supply reference ground

GND

Ground, connected to power supply reference ground

PD13

Input

TOUCHLINK pin, which is continuously pulled lower than 3000ms,

will initiate a ZLL network establishment or join request

PD14

Input

WAKE pin is mainly used to wake up the sleep terminal. It is high level

when powered on. When the pin is pulled low externally, the sleep

terminal device will be woken

PA0(TX)

Output

Serial port transmission port TX

PA1(RX)

Input

Serial port receiving port RX

PA2

Input/Outp

Reserve

PA4

Input/Outp

Reserve

PB11

Input

Operating mode switching pin. When the pull-low time is longer than

500ms, the operating mode is switched.

PB12

Input

UART_BAUD_RESET pin is used to reset the device baud rate. The

power-on default is high level. In any mode, if this pin is pulled lower

for more than 1000ms, the serial port parameters of the module will be

restored to the default 115200.

PB13

Output

ACK pin is used to indicate the last user data transmission status. This

pin is pulled low before the transmission is started, and the pin is pulled

high after the transmission.

PB14(GPIO0)

Input/Outp

GPIO Input/ Output port 0

3.3V

Module power supply positive reference voltage, voltage range

GND

Ground, connected to power supply reference ground

Chengdu Ebyte Electronic Technology Co., Ltd. E180-ZG120B-TB User Manual

PB15(GPIO1)

Input/Outp

GPIO Input/ Output port 1

PA5

Input/Outp

Reserve

PA3

Input/Outp

Reserve

PD15

Output

AUX pin indicates the current working status of the device. When the

pin is low level, it indicates that the device is busy, and high level

indicates that the device is idle.

PC6(GPIO2)

Input/Outp

GPIO Input/ Output port 2

PC7(GPIO3)

Input/Outp

GPIO Input/ Output port 3

PC8(ADC1)

Input

ADC detection port 1

PC9(ADC2)

Input

ADC detection port 2

PC10(ADC3)

Input

ADC detection port 3

PC11(ADC4)

Input

ADC detection port 4

SWCLK

Input/Outp

DBG_SWCLKTCK

SWDIO

Input/Outp

DBG_SWDIOTMS

PF2(PWM0)

Output

PWM output port 0

PF4(PWM2)

Output

PWM output port 2

PF5(PWM3)

Output

PWM output port 3

PF7

Output

The LINK pin indicates the current network status of the module, output

high level meter has been added to the network.

PF6(PWM4)

Output

PWM output port 4

PF3(PWM1)

Output

PWM output port 1

PD12

Input/Outp

Reserve

PD11

Input/Outp

Reserve

PD10

Input/Outp

Reserve

GND

Input/Outp

Ground, connected to power supply reference ground

nRESET

Input

Reset pin

3. Drive installation

The CP2102 chip is used as the serial port. Please download and use the driver software provided by our company.

After installation, the serial port can be identified in the device manager.

About us

Sales hotline: 4000-330-990 Tel: 028-61399028

Support: support@cdebyte.com Website: www.ebyte.com

Address: Innovation Center B333~D347, 4# XI-XIN road, High-tech district (west), Chengdu, Sichuan,

China

Indice

Altri manuali Ebyte Unità di controllo

Ebyte

Ebyte E73-2G4M08S1EX Manuale utente

Ebyte

Ebyte E104-BT52 Manuale utente

Ebyte

Ebyte E01-ML01S Manuale utente

Ebyte

Ebyte E70-915NW30S Manuale utente

Ebyte

Ebyte E220-900T30D Manuale utente

Ebyte

Ebyte E28-2G4T27SX Manuale utente

Ebyte

Ebyte E01-2G4M01S1B Manuale utente

Ebyte

Ebyte E104-BT40-TB Manuale utente

Ebyte

Ebyte E104-BT5011A Manuale utente

Ebyte

Ebyte E104-BT05 Manuale utente

Ebyte

Ebyte E22-900M22S Manuale utente

Ebyte

Ebyte E01-2G4M13S Manuale utente

Ebyte

Ebyte TLSR8253F512 Serias Manuale utente

Ebyte

Ebyte E01C-ML01S Manuale utente

Ebyte

Ebyte E73 2G4M04S1B Manuale utente

Ebyte

Ebyte E220-900M30S Manuale utente

Ebyte

Ebyte E28-2G4T12S Manuale utente

Ebyte

Ebyte E52-400/900NW22S Manuale utente

Ebyte

Ebyte E104-BT40 Manuale utente

Ebyte

Ebyte E51 Series Manuale utente

Ebyte

Ebyte E72-2G4M20S1C Manuale utente

Ebyte

Ebyte E22-900M30S Manuale utente

Ebyte

Ebyte E43-900T13S3 Manuale utente

Ebyte

Ebyte E78-900M22S1A Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente