Eclipse TD508MK3 Manuale utente
JAPANESE
GERMAN FRENCH ITALIAN SPANISH
ENGLISH
MANUAL No. 090003-32270700
･Thank you for purchasing this product.
･Please read this owner's manual thoroughly prior to carrying out installation and connections.
･Depending on the specific installation specialised skills maybe required. In such a case, please consult a
qualified technician.
･Installation by two people is always advised.
Keep this Owner’s Manual together with the Warranty Certificate in a safe place for later reference.
OWNER'S MANUAL
− 28 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Parts listParts list Check that all of the following items are present
＊This speaker has been designed around the Time Domain concept.
《What is Time Domain theory?》
The theory seeks to accurately reproduce the timing of the air and sound movement exactly, as if were present in
the original recording. The difference is you feel the sense of ‘being there’ at the original sound recording. We could
only achieve this experience using our unique technology.
Time domain theory is an audio theory proposed by Hiroyuki Yoshii, the President of TIMEDOMAIN Corporation.
Speaker
×1
Hexagonal wrench
(large) ×1
Hexagonal wrench
(small) ×1
Logo sticker
×1
Owner’s Manual
×1
Warranty
×1
Grille
×1
Plug
×5
Included with
TD510MK2 only
Contents
Parts list 28
Safety guidelines 29
Checklist before use 29
Speaker installation example 30
Parts and connections 31
Adjusting the speaker angle 32
Installing the speaker grille 33
On a floor or shelf 34
On a ceiling or wall 37
Care / Specifications 48
Warranty and After Service 49
Bracket installation positioning template 51
Contents
Before
installation
Installation
− 29 −
GERMAN FRENCH ITALIAN SPANISHENGLISH
Checklist before useChecklist before use
Safety guidelinesSafety guidelines
Caution
･The unit should be placed on a hard, flat surface. Placing the unit on an unstable surface may cause it to fall over and cause
injury.
･Do not climb on or swing from the unit. In particular, care should be exercised when children are present. The unit may fall or
break and cause injury.
Warning
･Do not open the unit as this may cause electric shock or injury. For repair or maintenance, please contact a Customer Service
Center. Do not attempt to modify the unit. This may cause fire or electric shock, and invalidate the warranty.
･Do not place the unit in the bathroom or anywhere exposed to rain. Do not use the unit in places with high humidity. This may
cause fire or electric shock. Be particularly careful when using the unit in rainy weather or when it is snowing, at the beach or near
water. Do not place above or near the unit, any flower vases, plant pots, cups, makeup, medicine or any vessel containing liquid
or any small metal objects. In case any liquid or small metal objects enter the unit, fire or electric shock may result.
･Be sure to set the volume to the minimum level before turning on the power supply for connected equipment and before switching
the input source. Sudden high levels of output can cause damage to the connected speaker system.
･Even pleasant music can be a disturbance at times. To avoid disturbance in your neighborhood, enjoy your unit at an appropriate
volume. Remember that at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment.
･Always be sure to turn off the power supply for the connected equipment before connecting the speaker.
･Be careful not to tip over the stand.
･Clean the unit by wiping it gently with a soft cloth moistened in neutral detergent. Do not use liquid solvents such as alcohol or
thinner to clean this product.
The following WARNING and CAUTION signs are used throughout this owner’s manual as well as on the product.
These signs alert the installer and users of important safety information to avoid risk of injury and damages to the
product. Make sure that you understand these signs thoroughly before reading this manual.
Warning
The instructions which follow this sign indicate situations where failure to follow the
instructions may result in death or severe injury.
Caution
The instructions which follow this sign indicate situations where failure to follow the
instructions could cause injury when using the product or physical damage to equipment
and surroundings.
Tip This section contains information that can help to prevent problems and damage to the
unit, and also contain other useful information.
− 30 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Speaker installation exampleSpeaker installation example
Installation on a floor or shelf ･Make fine adjustments to the speaker angle. Refer to P.32.
･Adjust the angle of the speaker arm. Refer to P.34.
･Installation summary Refer to P.37.
･Determine the speaker installation angle. Refer to P.38 - 39.
･Install the speaker on the ceiling. Refer to P.41 - 47.
･Make fine adjustments to the speaker angle. Refer to P.32.
TD508MK3 only
Ceiling installation
Wall mounting ･Installation summary Refer to P.37.
･Determine the speaker installation angle. Refer to P.40.
･Install the speaker on the wall. Refer to P.41 - 47.
･Make fine adjustments to the speaker angle. Refer to P.32.
The only speaker which can be installed on a wall is the
TD508MK3. The TD510MK2 cannot be installed on a
wall.
Caution
The CB1 mounting bracket available separately should
be used to provide the most flexible installation.
Tip
The CB1 mounting bracket available separately should
be used to provide the most flexible installation.
Tip
− 31 −
GERMAN FRENCH ITALIAN SPANISHENGLISH
Parts and connectionsParts and connections
※The diagrams are for the TD508MK3 are the same for the TD510MK2.
Speaker cable
Speaker cable
(diameter less than φ7 mm)
Speaker arm
Speaker base
Speaker input terminals
Speaker angle adjustment nut
Speaker base cover
Speaker base
Side with mark
2 main positions
：Default
Speaker arm
3 main positions
Side with mark
Hexagonal head screw
Speaker
Speaker
When connecting the speaker wires, insert the bare ends of the speaker wires correctly so that they do not touch
neighboring terminals, otherwise it may cause short-circuits.
Caution
The marks on the speaker arm can be used as a guide when adjusting the angle of the speaker arm.
Tip
For speaker cable diameter φ7 mm or less
If the speaker cable is passed through the cable holes in the speaker base and the speaker arm, it will improve
the outer appearance of the speaker.
For speaker cable diameter φ7 mm or more
The speaker cable cannot be passed through the speaker arm, so route it along the outside.
Tip
Tip
− 32 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Adjusting the speaker angleAdjusting the speaker angle
Speaker angle adjustment nut
Loosen the speaker angle adjustment nut on the under
side of the speaker arm.
Stand the speaker upright.
Adjust the speaker to the desired angle.
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
Place the speaker on its side.
Be careful not to let the speaker stand fall over while
adjusting the angle.
Caution
Securely tighten the speaker angle adjustment nut.
Speaker
＋15°
－10°
Speaker
Loosen
Speaker arm
Hexagonal wrench
(large)
The angle of the speaker can be adjusted within the
range of +15° to -10°.
Tip
− 33 −
GERMAN FRENCH ITALIAN SPANISHENGLISH
Installing the speaker grilleInstalling the speaker grille
Grille
Install the grille as shown in the illustration.
TD510MK2 only
Install the plugs as indicated.
Speaker
Speaker
Plugs X5
･The grille may be attached when the speaker is not
in use or at the users discretion.
･Clip the edge of the grille to secure it.
Tip
− 3 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
On a floor or shelfOn a floor or shelf
Screws X4
Speaker base cover
Safety cable
Remove the screws from the bottom of the speaker base
and keep to hand for use later.
Stand the speaker upright.
Remove the cover from the speaker base.
Remove the safety cable from the speaker base.
Speaker base
Screwdriver
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
Place the speaker on its side.
-
Adjusting the angle of the speaker arm
-
Speaker
Speaker
Speaker base
Screw
Screwdriver
Keep screws to hand for use later.
Tip
･If you wish to use the speaker at the standard angle position (as it is when removed from its packaging), there is
no need to adjust the angle.
･You can increase the speaker angle by 15° from its standard position (as it is when removed from its packaging)
by adjusting the speaker arm. (The angle of the speaker [including fine adjustmentsrefer to P.32] can be
adjusted by up to a maximum of +30°.)
Tip
− 35 −
GERMAN FRENCH ITALIAN SPANISHENGLISH
Speaker arm side with
mark
Remove the retaining bolt and the angle adjustment bolt
from the speaker arm side with the mark.
Install the retaining bolt to the speaker arm side with the
mark.
Set the angle of the speaker arm so that it is aligned with
the mark, and then tighten the angle adjustment bolt.
Mark：
Speaker arm
Speaker arm side with mark
Angle adjustment bolt
Speaker cone
Speaker
Speaker
Speaker cone
･When the retaining bolt and locking screw have been
removed, ensure the speaker does not fall forwards
so neither the cone or cabinet is damaged.
･Be careful not to get your hand or fingers caught in
the movable part of the speaker arm.
Caution
･When the retaining bolt and locking screw have been
removed, ensure the speaker does not fall forwards
so neither the cone or cabinet is damaged.
･Be careful not to get your hand or fingers caught in
the movable part of the speaker arm.
Caution
Speaker arm
Retaining bolt
Angle adjustment bolt
Angle
adjustment
bolt
Fixing holes
Hexagonal wrench
(small)
Hexagonal wrench
(large)
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
Place the speaker on its side.
The fixing holes at the and marks on the
speaker arm will not be used.
Tip
Remember to refit the locking bolt after adjusting the
angle.
Tip
The fixing hole at the mark on the speaker arm will
not be used.
Tip
Retaining bolt
Retaining bolt
− 36 −
ENGLISH GERMAN FRENCH ITALIAN SPANISH
Replace the safety cable, fixing to the base as shown.
Install the cover over the speaker base.
Install the screws from the bottom of the speaker base.
Spread a soft cloth over the floor in order to prevent
damaging the surface of the speaker.
Place the speaker on its side.
Speaker
Speaker
Speaker base
Speaker base
Screw
Speaker base cover
Stand the speaker upright.
Screws X4
Safety cable
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Eclipse Altoparlanti
Eclipse
Eclipse TD712z MK2 Manuale utente
Eclipse
Eclipse TD508II Manuale utente
Eclipse
Eclipse 508DMK3 Manuale utente
Eclipse
Eclipse TD712Z Manuale utente
Eclipse
Eclipse TD307II Series Manuale utente
Eclipse
Eclipse D5II Guida rapida
Eclipse
Eclipse TD508II Manuale utente
Eclipse
Eclipse D3II Manuale utente
Eclipse
Eclipse TD510ZMK2 Manuale utente
Eclipse
Eclipse TD712z MK2 Manuale utente
