Edge-Core AS6700-32X Manuale di istruzioni

CLI Reference Guide

www.edge-core.com

10G/40G Top-of-Rack Switches

AS5700-54X

AS6700-32X

Software Release v1.1.166.154

CLI Reference Guide

AS5700-54X

54-Port 10G Ethernet Switch with

48 10GBASE SFP+ Ports,

6 40GBASE QSFP Ports,

2 Power Supply Units,

and 4 Fan Trays (4 Fans – F2B and B2F Airflow)

AS6700-32X

32-Port 40G Data Center Switch

with 20 40G QSFP+ Ports,

2 40G Expansion Slots,

2 Power Supply Units,

and 5 Fan Trays (5 Fans – F2B or B2F Airflow)

E032016/ST-R02

149100000198A

– 3 –

How to Use This Guide

This guide includes detailed information on the switch software, including how to

operate and use the management functions of the switch. To deploy this switch

effectively and ensure trouble-free operation, you should first read the relevant

sections in this guide so that you are familiar with all of its software features.

Who Should Read This

Guide?

This guide is for network administrators who are responsible for operating and

maintaining network equipment. The guide assumes a basic working knowledge of

LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network

Management Protocol (SNMP).

How This Guide is

Organized

This guide describes the switch’s command line interface (CLI). For more detailed

information on the switch’s key features refer to the Administrator’s Guide.

The guide includes these sections:

◆Section I “Getting Started” — Includes information on connecting to the switch

and basic configuration procedures.

◆Section II “Command Line Interface” — Includes all management options

available through the CLI.

◆Section III “Appendices” — Includes information on troubleshooting switch

management access.

Documentation

This guide focuses on switch software configuration through the CLI.

For information on how to manage the switch through the Web management

interface, see the following guide:

Web Management Guide

Note:

For a general description of switch features, refer to “Introduction” in the

Web Management Guide.

For information on how to install the switch, see the following guide:

Installation Guide

How to Use This Guide

– 4 –

For all safety information and regulatory statements, see the following documents:

Quick Start Guide

Safety and Regulatory Information

Conventions The following conventions are used throughout this guide to show information:

Note:

Emphasizes important information or calls your attention to related features

or instructions.

Caution:

Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Warning:

Alerts you to a potential hazard that could cause personal injury.

Revision History This section summarizes the changes in each revision of this guide.

March 2016 Revision

This is the second version of this guide. This guide is valid for software release

v1.1.166.154. It contains the following changes:

October 2015 Revision

This is the first version of this guide. This guide is valid for software release

v1.1.0.152.

Table 1: Revision History

Description of Changes

Added:

Updated:

Deleted:

– 5 –

Contents

How to Use This Guide 3

Contents 5

Figures 43

Tables 45

Section I Getting Started 53

1 Initial Switch Configuration 55

Connecting to the Switch 55

Configuration Options 55

Connecting to the Console Port 56

Selecting Legacy or Hybrid Operation Mode 57

Logging Onto the Command Line Interface 57

Setting Passwords 58

Remote Connections (Network Interface or Craft Port) 58

Obtaining and Installing a License for the Network Ports 59

Configuring the Switch for Remote Management 61

Using the Service Port or Network Interface 61

Setting an IP Address 62

Enabling SNMP Management Access 67

Managing System Files 69

Upgrading the Operation Code 70

Saving or Restoring Configuration Settings 71

Configuring Automatic Installation of Operation Code and Configuration Settings

Downloading Operation Code from a File Server 72

Specifying a DHCP Client Identifier 75

Downloading a Configuration File Referenced by a DHCP Server 75

Contents

– 6 –

Setting the System Clock 77

Setting the Time Manually 78

Configuring SNTP 78

Configuring NTP 79

Section II Command Line Interface 81

2 Using the Command Line Interface 83

Accessing the CLI 83

Console Connection 83

Telnet Connection 83

Entering Commands 85

Keywords and Arguments 85

Minimum Abbreviation 85

Command Completion 85

Getting Help on Commands 86

Partial Keyword Lookup 87

Negating the Effect of Commands 88

Using Command History 88

Understanding Command Modes 88

Exec Commands 88

Configuration Commands 89

Command Line Processing 92

CLI Command Groups 93

3 General Commands 95

prompt 95

reload (Global Configuration) 96

enable 97

quit 98

show history 98

configure 99

disable 100

reload (Privileged Exec) 100

show reload 101

Contents

– 7 –

end 101

exit 101

4 System Management Commands 103

Device Designation 103

hostname 104

Banner Information 104

banner configure 105

banner configure company 106

banner configure dc-power-info 107

banner configure department 108

banner configure equipment-info 108

banner configure equipment-location 109

banner configure ip-lan 110

banner configure lp-number 110

banner configure manager-info 111

banner configure mux 112

banner configure note 112

show banner 113

System Status 113

location-led 114

show access-list tcam-utilization 115

show license file 116

show location-led status 117

show memory 117

show process cpu 117

show running-config 118

show startup-config 120

show system 120

show tech-support 122

show users 123

show version 123

show watchdog 124

watchdog software 124

Fan Control 125

Contents

– 8 –

fan-speed force-full 125

Frame Size 125

jumbo frame 126

File Management 126

General Commands 128

boot system 128

copy 129

delete 132

dir 133

onie 134

umount usbdisk 136

whichboot 136

Automatic Code Upgrade Commands 137

upgrade opcode auto 137

upgrade opcode path 138

upgrade opcode reload 139

show upgrade 140

TFTP Configuration Commands 140

ip tftp retry 140

ip tftp timeout 141

show ip tftp 141

Line 142

line 142

databits 143

exec-timeout 144

parity 145

password 146

password-thresh 147

silent-time 148

speed 148

stopbits 149

timeout login response 149

disconnect 150

terminal 151

Contents

– 9 –

show line 152

Event Logging 153

logging facility 153

logging history 154

logging host 155

logging on 155

logging trap 156

clear log 157

show log 157

show logging 158

SMTP Alerts 159

logging sendmail 160

logging sendmail host 160

logging sendmail level 161

logging sendmail destination-email 162

logging sendmail source-email 162

show logging sendmail 163

Time 163

SNTP Commands 164

sntp client 164

sntp poll 165

sntp server 166

show sntp 166

NTP Commands 167

ntp authenticate 167

ntp authentication-key 168

ntp client 169

ntp server 169

show ntp 170

Manual Configuration Commands 171

clock summer-time date 171

clock summer-time predefined 172

clock summer-time recurring 173

clock timezone 175

clock timezone-predefined 175

Contents

– 10 –

calendar set 176

show calendar 177

Time Range 177

time-range 178

absolute 178

periodic 179

show time-range 180

5 SNMP Commands 181

General SNMP Commands 182

snmp-server 182

snmp-server community 183

snmp-server contact 184

snmp-server location 184

show snmp 185

SNMP Target Host Commands 186

snmp-server enable traps 186

snmp-server host 187

snmp-server enable port-traps mac-notification 189

show snmp-server enable port-traps 190

SNMPv3 Commands 190

snmp-server engine-id 190

snmp-server group 191

snmp-server user 193

snmp-server view 194

show snmp engine-id 195

show snmp group 196

show snmp user 197

show snmp view 198

Notification Log Commands 199

nlm 199

snmp-server notify-filter 199

show nlm oper-status 201

show snmp notify-filter 201

Altri manuali per AS6700-32X

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Edge-Core Interruttore

Edge-Core

Edge-Core ECS4100 Series Manuale utente

Edge-Core

Edge-Core AGR420 Manuale utente

Edge-Core

Edge-Core ECS4510 Series Manuale utente

Edge-Core

Edge-Core ECS3510-28F Manuale utente

Edge-Core

Edge-Core ES4524M-PoE Manuale di programmazione

Edge-Core

Edge-Core ECS2100-10T Manuale utente

Edge-Core

Edge-Core AS6701-32X Manuale utente

Edge-Core

Edge-Core AS4600-54T Manuale utente

Edge-Core

Edge-Core AS9926-24D Manuale utente

Edge-Core

Edge-Core ECS4110-28T Manuale utente

Edge-Core

Edge-Core ECS2100-10T Manuale utente

Edge-Core

Edge-Core ES3526VA-PoE Manuale utente

Edge-Core

Edge-Core ES4524M-PoE Manuale utente

Edge-Core

Edge-Core ES4624-SFP Manuale utente

Edge-Core

Edge-Core ES3510MA Manuale utente

Edge-Core

Edge-Core ECS2100-10T Manuale utente

Edge-Core

Edge-Core ECS4660-28F Manuale di programmazione

Edge-Core

Edge-Core AS7312-54XS Manuale utente

Edge-Core

Edge-Core ES4626F Manuale di programmazione

Edge-Core

Edge-Core ECS4510-28P Manuale utente

Edge-Core

Edge-Core ECS4810-12M Layer 2 Manuale di programmazione

Edge-Core

Edge-Core ECS4650-54T Manuale utente

Edge-Core

Edge-Core ES3510MA Manuale di programmazione

Edge-Core

Edge-Core AS7535-28XB Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente