EDIFIER W210BT Manuale utente
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
EN 1. Power ON/OFF
2. Pairing
3. Reset
4. Controls
Wireless Neckband Headphones
W210BT
Manual
1. When they’re power o, press and hold the power button for 5s.
Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
1. The headphones are power on and disconnected from all devices.
2. Press and hold the " " and "v" at the same time for 5s.
3. The status light blinks green until reset is completed.
4. Once the headphones are reset, they enter pairing mode
automatically.
1st Pairing
1. Once the headphones are power on, they will enter Bluetooth
pairing automatically. Green and red LED will blink rapidly.
2. Select "EDIFIER W210BT" in your device setting to connect.
Note:
For subsequent use, the headphones will auto-connect to device
used last time.
5s
5s
Note:
1. : Press and hold
2. Images are for illustrative purposes only and may dier from the
actual product.
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
Model: EDF200104
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product. If any dierence is found, the actual
product prevails.
Press and hold the power button for 3s.
3s
Indicator
3s 5s
x1x3
x1 x1
x2x2
x1
x1
Altri manuali per W210BT
1
Indice
Altri manuali EDIFIER Cuffie
EDIFIER
EDIFIER Xemal X3 Manuale utente
EDIFIER
EDIFIER Xemal X5 Manuale utente
EDIFIER
EDIFIER Xemai X3 Lite Manuale utente
EDIFIER
EDIFIER TWS NB Manuale utente
EDIFIER
EDIFIER NeoBuds S Manuale utente
EDIFIER
EDIFIER W360BT Manuale utente
EDIFIER
EDIFIER TWS200 Manuale utente
EDIFIER
EDIFIER W820BT Manuale utente
EDIFIER
EDIFIER W180T Manuale utente
EDIFIER
EDIFIER TWS200 Pro Manuale utente
EDIFIER
EDIFIER TWS200 Plus Manuale utente
EDIFIER
EDIFIER TO-U2 mini Manuale utente
EDIFIER
EDIFIER W860NB Manuale utente
EDIFIER
EDIFIER TWS NBQ Manuale utente
EDIFIER
EDIFIER W845NB Manuale utente
EDIFIER
EDIFIER TO-U6+ Manuale utente
EDIFIER
EDIFIER TWS NB2 Manuale utente
EDIFIER
EDIFIER Xemal X5 Guida all'installazione
EDIFIER
EDIFIER NeoBuds Pro Manuale utente
EDIFIER
EDIFIER W210BT Manuale utente
